7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
2d3363a6d0
regen.
1998-11-04 06:41:57 +00:00
b0e0dc2101
(manufacturer, product) = (0x149, 0x265) is used both
...
"Linksys EthernetCard" and some new versions of "D-Link DE-650".
Changed the product string as such.
1998-11-04 06:40:54 +00:00
5bf12ef4b9
Allow newer versions of D-Link DE650 cards (the manufacturer and
...
the product are valid and the same as Linksys EthernetCard's) work
with the current ne driver.
Somewhat kludgy.
1998-11-04 06:37:09 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
de14bf4f80
Manuel confirms that defaulting to AUTO is ok, to Do It.
1998-10-30 23:30:16 +00:00
ed473183ef
Define the FORMAT UNIT command, and several related structures.
1998-10-30 02:07:15 +00:00
6020153959
- Assign copyright terms.
1998-10-30 00:53:12 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
e29350c92c
- Introduce MI NWSCONS drivers for TURBOchannel framebuffer option cards.
...
N.B., Digital UNIX never supports neither PMAG-AA (mfb) nor PMAG-BA (cfb)
for TC Alphas. PMAG-DV (xcfb) is Personal DECstation built in. All should
be good for console, but need much works for cursor/colormap completeness.
1998-10-29 12:24:24 +00:00
9ddbeaedbb
- match if the function just probing is disk and its interface is ATA.
...
- use product table only for the card which requires quirks or doesn't
have disk device interface tuple.
1998-10-29 09:49:51 +00:00
3f3c763b1b
Define some constants for function extension tuple of disk function.
1998-10-29 09:45:52 +00:00
634f1b5bf7
fix typo and some indentation.
1998-10-29 09:42:45 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
2fd1cb5817
Regen.
1998-10-27 00:55:46 +00:00
64acdc1e7a
Product ID for Xircom CreditCard CE2 10base-T Ethernet.
1998-10-27 00:55:30 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
thorpej