7ccd991041
Add FSDO.
1999-07-31 21:51:40 +00:00
749eee308d
If building without ITECONSOLE, don't install our own NMI handler. Just
...
leave the ROM's NMI handler in place.
1999-07-31 21:49:03 +00:00
f4da661b4a
Nuke the DCA check. ACPI can only be console on a 425e.
1999-07-31 21:17:08 +00:00
c870d5243c
Skip "serial 1" on non-425e models. It's mapped to DCA at 9 on every
...
other 4xx model, and the "not configured" could be pretty annoying.
1999-07-31 21:15:20 +00:00
e1f99936c8
Nuke apcicheckdca(). Since "serial 1" only exists as an APCI serial
...
port on the 425e, key off that instead.
1999-07-31 21:14:36 +00:00
a889d100a4
The previous change caused the BSS and any sections after it to be misaligned
...
in the file. Remove the part of the change which caused this.
1999-07-31 20:56:12 +00:00
232492c350
Oops, forgot to add MMUID_385.
1999-07-31 20:50:48 +00:00
5ab8857d4e
Add HP385.
1999-07-31 20:19:31 +00:00
f7b10e4c9f
defopt HP385.
1999-07-31 19:56:48 +00:00
72fa12a41c
Oops, forgot the HP_385 case in identifycpu().
1999-07-31 19:52:35 +00:00
70ada0957e
sync with recent KAME.
...
- loosen ipsec restriction on packet diredtion.
- revise icmp6 redirect handling on IsRouter bit.
- tcp/udp notification processing (link-local address case)
- cosmetic fixes (better code share across *BSD).
1999-07-31 18:41:15 +00:00
ca091a5e33
Fix oversight in last.
1999-07-31 17:20:22 +00:00
8c134b93a0
If unlink() fails w/ ENOENT, don't display an error message.
1999-07-31 05:22:05 +00:00
acef34de33
Add note that only the super-user may set or reset any flags on block
...
and character devices. [Commit by cjs.]
1999-07-31 03:30:44 +00:00
022cc95f70
Document kernel behaviour: flags on block and character devices cannot
...
be changed except by the superuser. [Commit by cjs.]
1999-07-31 03:24:46 +00:00
93146392a8
OpenBSD patch to prevent non-root users who own block or character devices
...
(typically ttys or ptys) from changing the flags on them. [Commit by cjs.]
1999-07-31 03:18:43 +00:00
7d1889a8bd
Identify the 385 and 425e. Partially from OpenBSD.
1999-07-31 01:26:04 +00:00
7c21482563
Add 385 and 425e SPU detection. From OpenBSD.
1999-07-31 00:45:28 +00:00
834772047c
Add MMUIDs for the 385 and 425e, and a machine ID for the 385. From OpenBSD.
1999-07-31 00:28:20 +00:00
8e2f403f42
Add ttyC? devices for com devices.
1999-07-31 00:00:03 +00:00
d4b9056054
Add preliminary support for the built-in modem on Tadpole 3GX/S
...
laptops. There is currently something wrong with the interrupt
code but it does attach and sense a 16550a. (anyways the built
in modem is only a 14.4Kb and you'd really want to use a PCMCIA
modem to get faster dialup rates).
1999-07-30 23:58:25 +00:00
8c0f3c5a5f
Add config file specificially for Tadpole 3GX/3GS laptops.
...
It save ~800KB over the standard GENERIC config file.
1999-07-30 23:55:43 +00:00
b6b44d6809
Eliminate the need for needs-count for wsmux. This should make
...
wsdisplays work properly again.
1999-07-30 20:52:27 +00:00
47d416e15d
When converting the end of a partition to CHS, use start + size - 1, not
...
start + size.
1999-07-30 20:46:10 +00:00
fff1639c50
GRR! Kludge around the extremely annoying wsmux configuration lossage
...
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
1999-07-30 20:42:16 +00:00
02140cb46f
Fix the 16-bytes-of-death bug by generating specific-EOI cycles during
...
sio_intr_setup().
1999-07-30 20:33:43 +00:00
8fd15316c9
Forgot /usr/include/ss (for krb5).
1999-07-30 19:40:25 +00:00
b9070123b4
Kerberos5 install paths.
1999-07-30 19:25:19 +00:00
55ffd6053b
sync with latest KAME. (no behavior change)
1999-07-30 19:16:45 +00:00
758e308974
fix behavior on 64bit CPUs. args to ioctl() must be u_long, not int.
1999-07-30 18:59:42 +00:00
d7bf3732b0
The new rasops stuff is a LOT faster; turn on rasterconsole on the cgsix.
1999-07-30 18:11:38 +00:00
398c91fa04
Adjust column-sizing code to keep output in 76 character lines, so output
...
doesn't wrap in sysinst.
1999-07-30 17:44:01 +00:00
c03616646c
- Fix TX 66Hz interrupt handling. Verified ok with PMAG-JA as an 8bpp
...
console. XXX troubles in cursor color.
- Typo in comments of MX.
1999-07-30 16:23:43 +00:00
5cd8715136
Formatting nits.
1999-07-30 16:08:59 +00:00
44b56d917e
regen
1999-07-30 16:04:41 +00:00
287f2ffe69
emulate fcntl(F_SETLK) & Co.
...
(seti@home works now:-)
1999-07-30 16:03:49 +00:00
6205a5ed9e
don't use the result of a readdir() after closedir(), from
...
Christian Groessler per PR bin/8107
1999-07-30 15:56:58 +00:00
2917356cae
Guard tsleep() with a while (!(wdc_c->flags & AT_DONE)) {}, as suggested by
...
Constantine Sapuntzakis confirmed by Bill Sommerfeld. Although nothing is
supposed to call wakeup on this without setting AT_DONE, it's good practice to
do it this way (the process may be waken up by a setrunnable() call).
1999-07-30 14:59:10 +00:00
c1f203f8b5
Change behaviour from running the command as the parent and ktrace/ktruss as
...
the child to be ktruss/ktrace is the parent. This fixes a problem with ktruss
where the prompt would be returned in the middle of output.
1999-07-30 14:03:55 +00:00
693fcfea31
s/uname -p/uname -m/ of course. Noted by Simon Burge.
1999-07-30 11:44:57 +00:00
09e76a1645
Remove two items that are done.
1999-07-30 11:40:19 +00:00
06c350054d
remove reference to in6_systm.h (file itself will be removed afterwords)
1999-07-30 10:35:34 +00:00
5413fa8362
do not include netinet/in6_systm.h, which has been empty for a while.
1999-07-30 10:31:22 +00:00
0f5e3f859a
do not include sys/netinet6/in6_systm.h, this has been empty.
1999-07-30 10:29:35 +00:00
32ef9ed514
Add NTFS to the list of file systems.
1999-07-30 09:54:57 +00:00
3c9ce57651
Don't try to copy an mbuf that may have been freed in case of an error.
1999-07-30 09:46:24 +00:00
41147083cf
Don't use GNU malloc() any more.
1999-07-30 04:07:23 +00:00
a18e0fb5ab
Use exec.
1999-07-30 02:42:32 +00:00
1880910b3a
Sync with GENERIC.
1999-07-30 02:35:18 +00:00
958ed46f74
Collect all little usage-messages spread around into one place,
...
and as a side effect, print the available commands (and their
usage) if no command is given on the command line.
Approved by Jason Thorpe.
1999-07-30 02:29:04 +00:00
thorpej