7ba12358d7
return isn't a function call
2000-08-12 12:20:17 +00:00
b108872b97
Remove spurious reset of card in probe routine -- it can almost certainly
...
safely be left till attach time.
2000-08-12 12:15:59 +00:00
ef01128d16
Avoid gratuitously copying data on transmission as well, and hence do away
...
with the 2k packet buffer in the softc.
2000-08-12 11:56:46 +00:00
c6253bccb9
add FOAD
2000-08-12 11:09:43 +00:00
fea1509f80
Apply fix from IWAMOTO Toshihiro in pr#10813:
...
rev 1.35 of ip_nat.c checks if packets are too short.
For ICMP packets, this packet length checking double counts
the length of an IP header contained in ICMP messages.
So, unless ICMP packets are long enough (such as echo-reply),
packets are mistakingly considered too short and are dropped.
2000-08-12 08:08:54 +00:00
35df2482b0
Protect a IPLLOG with ifdef IPFILTER_LOG. Patch from Darren Reed.
2000-08-12 08:04:18 +00:00
23830f1e6c
- Check CR_RST rather than ISR_TXRCMP and ISR_RXRCMP in sip_reset()
...
- Add more delay after reset
- "Big endian mode" on SiS 900 seems broken so don't enable it;
use htole32()/le32toh() instead
- Don't cast u_int16_t array to u_int8_t pointer
- Add some delay() to FILTER_EMIT macro in sip_set_filter()
Now SiS 900 works on my macppc.
2000-08-12 07:38:40 +00:00
4c0e0bb61c
- enable KERNFS and PROCFS
...
- disable NULLFS and UMAPFS
2000-08-12 06:59:01 +00:00
7803e30fde
- remove "options PMAP_NEW"
...
- enable "options INET"
- enable "pseudo-device loop"
2000-08-12 06:53:37 +00:00
8ecc16e026
Add the coda services.
2000-08-11 23:25:34 +00:00
576563305b
A little cleanup. Deal with lost packets
2000-08-11 23:11:12 +00:00
0f6c5303e1
Missed change of parameter for %r->db_format_radix() change.
2000-08-11 22:50:47 +00:00
52a3078697
fix some size_t/int confusion.
2000-08-11 22:21:41 +00:00
66617b2137
Add ibcs2_sys_gtty.
2000-08-11 22:20:10 +00:00
ef5099c8d8
Use size_t appropriately.
2000-08-11 22:19:29 +00:00
e4dc804075
Regen.
2000-08-11 22:17:58 +00:00
4153441571
add ibcs2_sys_gtty
2000-08-11 22:14:07 +00:00
c9dc8413bb
Make our policy WRT tagged queueing consistent and sane: ordered tags for sync writes, simple tags for all else. Should make ahc and adv a bit more reliable (metadata writes won't get reordered incorrectly...) and isp a bit more performant (it was using ordered tags all the time).
2000-08-11 21:31:19 +00:00
36ff456d9a
Document the DE422 Ethernet interface.
2000-08-11 20:47:14 +00:00
2ef55c239a
Add __mb_cur_max and rename setlocale function.
...
(Lack of __mb_cur_max causes to import setlocale.o in libc.a
and causes conflict of symbol, pointed out by Johan Danielsson.)
2000-08-11 19:58:34 +00:00
bd462d0988
fix one of debug printfs to print dosfilename correctly, and include
...
a newline
2000-08-11 19:41:58 +00:00
01c441e0c2
Fix device creation for SCSI tapes.
2000-08-11 19:19:03 +00:00
65c9982dfa
Back out part of previous which was unintended.
2000-08-11 18:26:09 +00:00
7e0d8cf541
hide InitializeBSD if DONT_INIT_BSC is defined
2000-08-11 15:11:22 +00:00
18f2e17644
fix the first (temporary) kernel stack address
...
from IOM_RAM_BEGIN + 0x003ff000
to IOM_RAM_BEGIN + IOM_RAM_SIZE - 0x00001000
2000-08-11 14:51:08 +00:00
c30304eb14
Declare the `depca' device here, now that it can attach to
...
multiple busses.
2000-08-11 14:35:57 +00:00
0e25756aee
s/LANG/SYSINST&/ - the former one clashes with variable commonly
...
used to choose locales
2000-08-11 13:05:15 +00:00
8e0079b444
Merge tzdata2000f.
2000-08-11 12:03:21 +00:00
4c613c91ee
Import tzdata2000f.
2000-08-11 12:00:56 +00:00
f88536df95
s/nodevs/nodev/ for mount option.
2000-08-11 11:59:44 +00:00
3681169826
fix thinko of revision 1.4.
...
the change seemed to intend "/net" and "/cd", rather than "/mnt" and "/cd".
2000-08-11 11:59:14 +00:00
e36c17d6c2
Have port-i386 use installation/floppy, for conformance with release(7).
2000-08-11 09:20:38 +00:00
82a02d5fad
A few minor grammar fixes.
2000-08-11 04:05:01 +00:00
9ee127a42c
back out previous, and do it properly:
...
copy the ASM_OUTPUT_CONSTRUCTOR and ASM_OUTPUT_DESTRUCTOR defines from
sol2-sld-64.h.
2000-08-11 03:31:41 +00:00
239844c32c
if TARGET_CPU_DEFAULT is TARGET_CPU_v9 or TARGET_CPU_ultrasparc, define
...
ASM_LONG to be ".xword". this makes C++ global ctors and dtors work
on the sparc64. noted by mycroft.
2000-08-11 03:13:32 +00:00
e4eb846113
Add depca at eisa.
2000-08-11 03:05:19 +00:00
b2ee6c4c4c
Clarify kdc section.
2000-08-11 02:39:27 +00:00
8cb7deb85b
Add support for the DEC DE422 Ethernet, which is a DEPCA
...
attached to the EISA bus. This board is commonly found
on Alpha Jensen systems.
2000-08-11 02:27:07 +00:00
62037f7722
kdc superseded kerberos. not sure if the description is 100% right.
2000-08-11 02:25:52 +00:00
e931f846ff
#if 0 out a debugging printf.
2000-08-11 01:02:39 +00:00
d561771013
Add missing copyright noticed (it ended up in eisareg.h by mistake).
2000-08-11 00:46:17 +00:00
5310aa68b8
Oops, back out previous. It wasn't intended.
2000-08-11 00:44:37 +00:00
e207174eb0
Add functions to read EISA configuration data for MEM, IRQ, DMA, and IO.
...
XXX Just error stubs on the i386 right now -- someone needs to write
XXX EISA BIOS code for i386.
2000-08-11 00:43:18 +00:00
30f7d691a0
Declare the ECU data in an MI location, so that drivers can
...
use it.
2000-08-10 23:30:08 +00:00
e801d41011
Remove void casts from splx(). It returns void anyway.
2000-08-10 23:06:38 +00:00
c636092423
Use ETHER_IS_MULTICAST where relevant.
2000-08-10 23:03:04 +00:00
24ab4fb4f8
Check the podule has a description before using it.
2000-08-10 22:57:01 +00:00
5007ab036b
- sshd has a pid file, so take advantage of it
...
- support `reload' arg (using default of SIGHUP)
2000-08-10 22:49:43 +00:00
2fb8a3feb8
Clean up packet reception. Notably, copy data straight from the card to
...
mbuf(s) without using the packet buffer in the softc. Also, clean up error
messages.
2000-08-10 22:43:45 +00:00
95ac0dc817
In db_disasm() use fuword() to fetch user addresses. Mainly to avoid
...
bad EPCs from losing the initial ddb context when panicing, but also
helps with typos.
2000-08-10 22:31:26 +00:00
bjh21