create an assembly label, and SYSCALLNUM to convert a syscall name into
the macro that's defined to be its number. Add a CALLSYS_NOERROR macro
which invokes the named system call. (CALLSYS_NOERROR is here since
it's used in locore, for sigcode.)
autoconfiguration. It clears the RPB's per-cpu-slot BIP flag and
sets up the RPB's restore_term and restart vectors, etc. add a
console_restart() function, which causes a panic and system dump,
that is invoked (indirectly) via those vectors.
eventually, the restart HWRPB vector), which calls console_restart. This
is invoked when the console halt switch is used and the user enters 'c'
at the console prompt, and eventually causes a system crash dump to be
generated.
to signal that the build is happening on a machine with an ELF
toolchain. This is temporary, until a better toolchain-recognition
scheme is worked out.
* Handle message retransmissions and partially sent messages correctly.
* Make sure we clear ATN after the last message is sent.
* Do the right thing if the target initiates negotiation for async mode
after having negotiated sync mode.
* Fix some cases where we set ATN with no message queued, or schedule a
message without setting ATN.
* Issue a REQUEST SENSE after an unexpected disconnect, per SCSI spec.
* Fix abort handling in a number of cases.
* Recognize selection timeouts better (to speed up probing).
ELF-outputting version of the assembler. (It was dying when it saw
some CPP line number markers.) This is temporary. (Workaround suggested
by Matt Thomas.)
consistency with the way machdep headers for other things are done.
(the creation of the ecoff_machdep.h files was done on the CVS server, to
keep the RCS logs intact.)
macros to use to remove #ifdefs from the machine ID case check.
Eventually, these headers will contain other information, e.g.
machine-dependent relocation information, etc.
(1) the if_prom code needs to be cleaned up quite a bit
(right now it hard-codes client's ethernet address), and
(2) much of this code (esp: getsecs.c, netboot.c, newvers.sh,
rpcc.S) should be shared with other Alpha boot blocks,
and dev_net.[ch] should maybe go in libsa proper.
boot block, since it will be shared with the network boot block.
(2) Kill a.out support, since it never worked was never used, and will
never be.
(3) Add support for booting of ELF kernels, from Matt Thomas. (Currently
untested, but it compiles.)
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
profiling enabled. (named the same as what GENERIC kernel
would be named if configured with config -p, which would end up
generating the same kernel as this.)
figure out the correct IRQ for the ethernet on the AlphaStation 500.
That code is enabled via KN20AA_BOGUS_IRQ_FROB (but hopefully won't be
needed any time soon, and won't link w/o slight changes to other code).
Basically, when establishing an interrupt that we don't know what to
do with, prompt the user for what interrupt line to enable. If you
get stray interrupts when you try to use the device (but not before),
then you've got the right line.
found on the AlphaStation 600), and interrupts on interrupt line 13.
Thanks to Andrew Gallatin for booting a test kernel 32 times (trying
each interrupt line, looking for the right one) to find this.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
mapping code. (instead of using a "slot" and multiplying by 4 and adding the
pin number later to get the IRQ, just use base IRQ value and add the pin
number.)
start adding back in tracing printfs. add support for the virtual page
table. Now it gets to user-land code, but fails because i've not
added support to the context switch code to activate and deactivate pmaps.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add unaligned access fixup code to fix unaligned quad, long,
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add a boot flag ('H' and 'h') to make sure the kernel never
reboots after panic. Useful for debugging kernels which panic early
on after user processes have started, to fend off infinite reboot cycles.
Sort boot flag switch.
(3) Add unaligned access fixup code to fix unaligned quad, long,
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Clean up interrupt handling slightly.
(3) Add machinery to make [fs]uswintr be a bit more careful when
determining if a fault was actually their fault. (Unfortunately, they're
not actually implemented now, anyway.)
(4) Minor cleanup.
handling based on information in the 2nd Ed. of the Alpha Architecture
Reference Manual.
(2) Clean up interrupt handling slightly.
(3) Clean up badaddr().
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add machinery to make [fs]uswintr be a bit more careful when
determining if a fault was actually their fault. (Unfortunately, they're
not actually implemented now, anyway.)
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Restructure and improve machine check and correctable error
handling based on information in the 2nd Ed. of the Alpha Architecture
Reference Manual.
(3) Removed unused (and not likely useful) PALcode assembly stubs.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
unnecessary, and given that there's no reason to waste time and
add complexity in trap handlers. This means that code which sets and
uses the USP has to be a bit more careful, but that doesn't happen much.
containing a substruct (the hardware frame) and an array of registers,
treat it like one big array of registers, for easier and prettier
access. Update everything to deal with that.
Process Control Block
Interrupt/Exception/Syscall Stack Frame
Machine Check Error Summary Register
Machine Check Logout Area
clean up some, and add prototypes for all of the CPU instruction and
PALcode function stubs.
alpha_cpu.h, and this file is no longer necessary for the
Alpha. However, some machine-independent code (e.g.
/sys/compat/common/kern_exit_43.c) still wants a file with
this name to be around.
from the mach3 versions only as much as necessary to allow the old
NetBSD/Alpha pmap code to compile. THESE WILL NOT WORK AS-IS, and at
minimum will require code to implement reference- and modified-bit
emulation.
works) for my machines and now-nonexistent test machines. Clean up
options in existing config files so that they're more consistent. Add
more units of various pseudo-devices to several.
This is a bit of a hack, as-is, since there's a lot of code that's
outright duplicated between the various files and because it doesn't
support detection of a network device as the root device. The
latter's not a problem yet, because NetBSD/Alpha can't load the kernel
from the network to begin with.
(1) right now GENERIC can boot via NFS, and
(2) in the long run, GENERIC should autodetect network booting
and pick the correct root device.
Because of (1), GENERIC_NFS is no longer _needed_ in the short term.
Because of (2), GENERIC_NFS is not _wanted_ in the long term.
and whacking a bit here and there where appropriate. Does not yet do
automatic root device detection, but that's much easier to add now.
RB_ASKNAME now supports specification of network devices, for diskless
booting. Also, RB_ASKNAME is now supported on _all_ kernels.
a (was ~RB_SINGLE, redundant with 'A') -> askname
n (was RB_ASKNAME) -> no meaning
d (was RB_DFLTROOT) -> no meaning (unnecessary with new setroot() code)
m (was RB_MINIROOT) -> no meaning (miniroots currently unsupported;
#ifdef'd out)
N (was ~RB_ASKNAME) -> no meaning (unnecessary; just don't specify RB_ASKNAME!)
>Update for present reality (function names), clean up a bit (printfs,
>"panic: foo XXX"), and fix a couple of printf format specified bugs
>(which were normally #if 0'd out). Inspired by Multia/UDB support
>changes sent by Matt Thomas.
and:
>changes from Matt Thomas so that the Multia/UDB can attach its
>'com' interrupts, cleaned up some. Basically: if sharing type of
>new interrupt is different than what the hardware is currently set up
>for (e.g. requesting edge-triggered and the hardware is set up by
>the PROM for level triggered) and there are no interrupt handlers on
>that line already, warn about it and use the hardware type that the
>line was already set for (to avoid making the console blow up on
>reboot). If same circumstances but there is already a handler, panic
>as before.
common back-ends that live on multiple very-different busses (e.g. PCI and
TC), which need bus-specific DMA mapping support. As a nice side effect,
this will allow the especially nasty (vtophys(va) | 0x40000000) expressions
to go away in favor of less nasty bus-specific function calls.
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x01 would be checksummed
incorrectly: rather than adding two 32-bit quantities together to
sum a quadword (which was losing a carry bit), add as four 16-bit
quantities.
