fvdl
bb159432ef
Add a -I flag which, combined with -e, gives the user the opportunity
...
to edit and create a new label on a virgin disk.
2000-05-31 14:13:48 +00:00
jdolecek
2d6c6df05e
add system(3) for spawning the editor - this is handy when EDITOR is set to
...
something like 'editor arg1 arg2 ...'
2000-05-27 19:01:13 +00:00
thorpej
ead7f2a346
Provide some information when confirming "Write outside MBR partition".
2000-05-25 21:23:37 +00:00
soren
abf17c0cc1
MBR on cobalt too.
2000-05-02 19:00:41 +00:00
nonaka
e4f0173fa3
also use mbr partition table on prep.
2000-05-02 18:21:41 +00:00
enami
07702f68a6
Introduce new filesystem type FS_CCD so that an operator can mark the
...
ccd component partition. Note that the ccd driver still allows partitions
of any types as components since an on-disk BSD disklabel isn't available
on some port.
2000-04-05 04:03:20 +00:00
enami
8fa8b77325
Sync disklabel.5 with disklabel.h and dkio.h more closely.
2000-03-16 05:16:19 +00:00
hubertf
48058cc69e
s/comprised/composed/, per PR 9586 by Seebs <seebs@ged.plethora.net>
2000-03-09 12:50:36 +00:00
oster
565f0151c5
Note the "RAID" partition type.
2000-02-11 02:05:28 +00:00
soda
6079ffd98c
mention that hpcmips and arc use `d' as RAW_PART.
2000-01-31 16:02:43 +00:00
soda
3c7d51f177
- use MBR partition table also on arc.
...
- use defined(USE_MBR) instead of defined(__i386__), like hpcmips and arc.
2000-01-31 16:01:06 +00:00
perseant
f1dfdc6927
disklabel now understands the p_sgs partition field (shift to compute
...
segment size from block size).
newfs_lfs now reads the disklabel to find segment, block, and fragment
sizes. Because reading this info from the wrong fs type could result in
very poor fs layout (e.g. ffs has "16" where the segshift would go,
resulting in 512-*megabyte* segments for 8K blocks), newfs_lfs refuses
to create a filesystem on a partition not labeled "4.4LFS".
Man pages for newfs_lfs updated to reflect this change.
2000-01-18 00:02:28 +00:00
shin
8ceded3101
Add '-DSAVEBOOTAREA' to keep MBR partition information
...
when NetBSD partition starts at sector 0.
Closes PR:port-hpcmips/9146.
2000-01-09 02:45:43 +00:00
fair
35b8613acb
change "millisecond" to "microsecond" for headswitch and track seek
...
comments, to resolve PR 8189. This makes the documentation for these
fields consistent. Not that it matters - a grep of syssrc shows that
these fields aren't actually used for anything and should probably be
GC'd.
1999-12-20 18:19:18 +00:00
abs
dfa0f92f2e
Use '$' instead of '-' to select remainder of disk interactively
1999-12-17 13:06:49 +00:00
abs
669feec4e3
When setting size of partitions interactively allow '-' for remainder of disk
1999-12-17 12:30:02 +00:00
mrg
5f534fca77
allow changing partition info from inside the interactive handler.
1999-11-26 06:03:09 +00:00
shin
7a8dbc6aa3
Fix typo. ('_i386__' -> '__i386__')
...
Pointed by D'Arcy J.M. Cain, thanks.
1999-10-12 00:36:17 +00:00
shin
39a8a0436e
add hpcmips support (MBR)
1999-10-11 05:28:04 +00:00
ross
10078c4c8b
don't unbalance { } pairs with #ifdefs or ctags(1) gets confused
1999-09-17 18:30:33 +00:00
abs
b755b885d5
Accept 'Y' for label disk as well as 'y'
1999-09-05 07:27:55 +00:00
bouyer
21521cffe4
Sync with sys/disklabel.h
1999-08-13 10:23:39 +00:00
kleink
03f1e83295
Try $TMPDIR before resorting to _PATH_TMP.
1999-07-21 17:56:34 +00:00
is
a895e91016
Make BSDLFS a EXT2FS-like filesystem, that is, dont print or parse the cpg
...
field.
According to disklabel.h, its LFS semantics are "segment shift" (log2(segment
size)), but in the code it is used nowhere, and there are even plans to
allow non-poweroftwo segment sizes, so it won't ever work.
While at this, simplify the disktab-like output routine... here, currently,
BSDFFS, BSDLFS, EX2FS and ADOS do the same, so don't duplicate the code.
1999-06-04 19:02:34 +00:00
is
37cb96a063
Print bsize and fsize in disktab-format output also for LFS and ADOS.
1999-06-03 21:15:49 +00:00
is
85270790c6
Print/parse block size, fragment size and cpg for FS_BSDLFS and FS_ADOS.
...
(cpg has different semantics for LFS and ADOS, but is in use.)
XXX The disktab reading/disktab format output writing needs still to be done.
1999-06-03 20:59:04 +00:00
cgd
50f0c49606
On NetBSD/alpha, go out of the way to read the boot area's contents if -r
...
is specified, so that the boot blocks aren't clobbered when writing labels.
1999-06-03 01:58:51 +00:00
cgd
a54ad4c40d
kill some bogus comments about -r: it _does not_ cause the boot area to
...
be clobbered. since 4.4-Lite(?) disklabel.c has gone to extra effort
to avoid clobbering the boot area when using -r, but the 4.4-Lite manual
pages were apparently not updated to note that!
1999-06-03 01:49:58 +00:00
christos
563aff8153
Add a 'chain' command in interactive mode that allows you to vary the
...
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
1999-05-03 09:45:01 +00:00
abs
e8dacca7c3
STRICT_ALIGNMENT only applies to the start of partitions, not length.
1999-04-30 04:46:50 +00:00
wrstuden
e312a3c208
Fix disklabel -t to work with disks that don't end on a cylinder. Before it
...
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.
Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
1999-04-29 19:12:07 +00:00
abs
2969961420
Allow partitions to extend to the end of the disk, even when
...
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
1999-04-26 02:05:46 +00:00
kleink
e524714ca8
Update for sparc64.
1999-04-09 16:01:34 +00:00
kleink
de8c37eadc
Update a pasto-ed comment.
1999-04-09 16:00:17 +00:00
bouyer
3cf54e49e9
If checklabel() failed, the label has not been written, so exit(1).
1999-04-09 10:06:18 +00:00
cgd
9164307eaf
instead of coding an alpha boot block checksum routine here, use
...
the macro now provided by disklabel.h
1999-04-05 02:50:52 +00:00
mycroft
f6590b22cd
Clean up SYNOPSIS formatting.
1999-03-07 11:02:05 +00:00
thorpej
fe8e643590
Use <sys/disklabel_mbr.h>
1999-01-27 22:04:51 +00:00
pk
832bb22922
Enable non-cylinder-aligned partition warning on sparc[64] & sun3.
...
See also PR#6853.
1999-01-21 11:58:00 +00:00
abs
593d6c65b9
Add '-f disktab' option to disklabel, via lib/6623 from
...
Greg A. Woods <woods@most.weird.com>. (Very) slightly tweaked disklabel.8
1999-01-19 06:24:08 +00:00
christos
7b57bf6d78
Adjust for DKTYPENAME changes.
1998-11-12 16:19:47 +00:00
perry
bfd526219d
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-10 02:57:23 +00:00
drochner
1767a286ec
-fix some lint warnings
...
-fix overflow conditions (PR bin/5534, Zdenek Salvet <salvet@ics.muni.cz>)
(+ one more: can VAX SMD drives be >4G?)
-fix output of "*" at odd end cylinder number (not odd size)
-break some lines >80 cols
1998-08-04 11:52:52 +00:00
mycroft
5582b71d91
Shift column headers into the right position.
1998-07-27 17:19:58 +00:00
mycroft
48ba78aafd
const poisoning.
1998-07-26 12:00:43 +00:00
mark
e7424be3c9
Fix from Chris Demetriou to modify the way in which arm32 filecore
...
checksums are calculated paying attention to the fact that the way
the checksum works a sectors filled with a single byte value will
always checksum correctly.
1998-06-07 20:33:22 +00:00
fair
3d7afc6d03
fix bad .Xr references
1998-04-29 09:49:10 +00:00
fair
c46ab392dc
Principally, change foo(N) to .Xr foo N
...
Also, do some other mdoc tagging.
1998-04-28 04:07:04 +00:00
fair
01a274e0ea
Clarify the documentation of the "-B" option, inspired by PR#5262.
...
Contrary to the PR, the "-B" option does work, but not on all platforms.
1998-04-27 21:03:08 +00:00
cgd
4cc8220755
when reading the MBR, seek to DOSBBSECTOR * DEV_BSIZE rather than just
...
DOSBBSECTOR. DOSBBSECTOR is 0 so it doesn't really matter, but the former
is what was really intended.
1998-03-26 01:37:49 +00:00