d2ad7a00c2
should be 'struct reg' not 'struct regs' -- it's in reg.h, after all!
...
also, delete r_fs and r_gs; looking at the code and comments
describing/using this struct, they don't belong here
(though if support for them is ever put in here, they should be,
but for i486-en only... how do you do that 'reasonably,' though?
interface issues...)
1993-12-22 12:57:24 +00:00
7fbfc4bac0
add (possibly iffy) definitions of PSL_USERSET and PSL_USERCLR,
...
"standard" PSL masks.
1993-12-22 12:56:08 +00:00
dced52af6c
bump MAXSSIZ back down to 8M (from 256M, where charles put it).
...
execve() currently allocated MAXSSIZ of address space (AND PAGE TABLES)
for the stack. until that's changed, and the stack-handling code is
updated to match, MAXSSIZ==256M will make execve() significantly slower
than MAXSSIZ==8M.
1993-12-22 12:30:59 +00:00
6c32b87568
Remove two unused fields.
1993-12-21 09:47:45 +00:00
ac8be1b959
Add pseudo-device vn
1993-12-21 05:27:35 +00:00
7d88d99ac0
Add vn block/char device
1993-12-21 05:26:49 +00:00
ddefd2e1b8
Fixed bug where with two or more SCSI controllers of the same type, you
...
could not have devices at the same ID on each bus.
This patch not directly applicable to magnum branch, which is using Julian's
new SCSI code.
1993-12-20 23:27:28 +00:00
cf3c69ea3b
Correct support for single stepping of syscalls and fpu emulation
1993-12-20 17:16:42 +00:00
fb9b8e7923
add DIAGNOSTIC to each
1993-12-20 10:07:58 +00:00
0d115f4690
Remove out of line versions of pio functions.
1993-12-20 09:20:54 +00:00
6cbf9be7da
Use cpufunc.h only where (currently) needed.
1993-12-20 09:11:38 +00:00
0cd3f0fdd2
Remove some things which should not be here.
1993-12-20 09:08:11 +00:00
de04e7e727
New, more complete version.
1993-12-20 09:07:22 +00:00
f2a0b4b335
Canonicalize all #includes, and add pio.h where appropriate.
1993-12-20 09:05:17 +00:00
680c4cb0a0
change panic() for "unknown cpu type" so that it's only got one arg;
...
"#ifdef notdef" the old way; panic() will be upgraded eventually...
1993-12-20 06:40:55 +00:00
335014be84
Increment cnt.v_trap in npxintr().
1993-12-20 05:30:55 +00:00
e7a1e00bd6
Garbage collection.
1993-12-20 05:26:36 +00:00
2250fff236
Cleanup and garbage collection; nothing significant. From magnum branch.
1993-12-20 05:25:02 +00:00
546d92cec9
Forgot to decrement these.
1993-12-19 07:54:52 +00:00
c857af00dc
Clean up trap handling and macroize interrupt entry and exit code. From
...
magnum branch.
1993-12-19 06:58:12 +00:00
a0e7e031f6
Cleanup of trap handling, and macroization of interrupt entry and exit
...
sequences. From magnum branch.
1993-12-19 04:16:45 +00:00
8b7ff01b9e
Clean up deleted files.
1993-12-19 03:42:13 +00:00
90b25c90a1
Cleanup from magnum branch.
1993-12-19 03:41:30 +00:00
122460dca2
Clean bogus arguments to newvers, and don't pass KERN_IDENT any more.
1993-12-18 04:23:04 +00:00
be71d62793
direct -> dirent
1993-12-17 00:41:23 +00:00
ea13c12adc
From magnum branch:
...
Remove Jolitz's netisr kluge. Make sure cpl == 0 really means base priority.
Other minor cleanup.
1993-12-17 00:10:06 +00:00
5d474c1aad
Remove an `#ifdef MACHINE_NONCONTIG', as it is now required.
1993-12-16 20:23:56 +00:00
8ab45ada42
Eliminate reference to Maxmem.
1993-12-16 20:22:56 +00:00
b4b8e47e12
IFF_LLC0->IFF_LINK0
1993-12-16 20:14:10 +00:00
4eef2bd5ca
oh my... make NS work.
...
(mental note to check more thoroughly in future)
1993-12-16 04:29:07 +00:00
32fa8934ac
Octal; Hex... It's all the same... :-)
...
>From deaven@ishmael.ameslab.gov
1993-12-16 00:40:05 +00:00
4b68c8d809
Fix a serious bug I introduced.
1993-12-15 14:47:38 +00:00
a317941b21
Minor change.
1993-12-15 11:33:47 +00:00
1cc1b73beb
Cleanup of startup and signal handling code from magnum branch.
1993-12-15 09:31:29 +00:00
6c404098c1
Rearrange some tests to improve efficiency a little when using BPF and
...
multicast at the same time.
1993-12-15 03:01:07 +00:00
11d78045d5
correct docs
1993-12-15 01:06:55 +00:00
cbe3d33b6d
P[GD]_SHIFT --> P[GD]SHIFT
1993-12-15 00:50:45 +00:00
13552373e2
Some general code cleanup.
1993-12-14 13:02:52 +00:00
fccc819b20
Fold in most of the magnum vm changes.
1993-12-14 05:31:17 +00:00
e870ded5c4
Driver for 3Com Etherlink-III (3c509) written by me. Kudos to Charles
...
and Theo for help and optimizations. (without which this driver would
never have achieved speeds of 1010KB/sec)
1993-12-14 04:26:45 +00:00
55a9a547a2
from Soeren Schmidt <sos@login.dkuug.dk>:
...
Basically it does a timeout on lost interrupts, starting the operation
again and logging and error message on the console.
additionally fixes some of the (newer ending) while loops
(that made it work with two IDE disks !)
1993-12-13 10:16:56 +00:00
e24af4c37c
what the heck; i've got tunnel drivers now too
1993-12-13 05:03:18 +00:00
819b21a7fc
add tunnel driver
1993-12-13 05:02:06 +00:00
ac0c68e1db
ie. also pass up any packet with the multicast bit set in the ethernet
...
>From: Havard Eidnes <Havard.Eidnes@runit.sintef.no>
1993-12-12 20:24:37 +00:00
40be71a246
bump up number of SLIP pseudo-devs to 4
1993-12-10 16:22:58 +00:00
0e5dbe1a22
IF_LLC0 -> IF_LINK0
1993-12-10 10:57:40 +00:00
e4f36e2ea9
Remove excess cruft. This machine has too little memory for unused baggage.
1993-12-10 08:55:32 +00:00
714c5818db
Make sure the high 16 bits of cpl gets a sane value (0) when reloading after a
...
process switch. (HI THEO!)
1993-12-10 08:51:28 +00:00
7e2c70ce74
Add random.s for multicast stuff.
1993-12-10 05:38:37 +00:00
dc1b697fb8
More multicast stuff
...
>From cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-10 05:37:33 +00:00
3a4bc73f21
More multicast related stuff.
...
>From Chris Maeda, cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-09 00:32:14 +00:00
9a48e42157
__386BSD__ -> __NetBSD__
1993-12-07 12:51:58 +00:00
fb60f2ced9
Turn off special mask mode by default. It is clearly not supported enough.
1993-12-05 11:20:09 +00:00
b26f063ecf
add MACHINE_ARCH as i386
1993-12-04 02:04:31 +00:00
c05bd599a0
i have an ep
1993-12-04 01:20:51 +00:00
8ca56a8a85
ep driver..
1993-12-03 12:02:38 +00:00
720d26b6bf
Add dummy speakerattach() until it's made into a real device. Reported by
...
Mark_Weaver@brown.edu .
1993-12-03 09:37:56 +00:00
c69bc4a95f
I have a scsi controller now!
1993-12-03 05:31:03 +00:00
0977b6ec81
add ep driver
1993-12-03 02:58:42 +00:00
3956e86fbd
Enable mcd0.
1993-11-29 18:19:29 +00:00
7095375da9
Enable ch*.
1993-11-29 04:59:26 +00:00
aadbc0a6da
Remove explicit port for ahb[01].
1993-11-29 01:03:44 +00:00
4e20653888
Enable ahb[01].
1993-11-29 00:39:21 +00:00
6ac9e15bb1
New test config.
1993-11-28 10:50:44 +00:00
4acf267f87
Enable uha[01].
1993-11-26 10:50:36 +00:00
003abe0b84
Enable st and cd.
1993-11-25 08:01:13 +00:00
11ba2e43d8
Enable aha[01], sd*.
1993-11-24 03:26:04 +00:00
7abca02b8a
added two copyright strings at the request of Gary Clark II
...
<gclarkii@freefall.cdrom.com>, because he hacked and is in the process
of hacking the code significantly.
1993-11-17 12:22:50 +00:00
183fd1b02f
cut down SHMMAXPGS (temporary)
1993-11-15 11:41:54 +00:00
7377ae9734
Support for ESIS over X.25 is not complete.
1993-11-14 19:40:47 +00:00
9c68389ee6
Junk PARANOID.
1993-11-14 17:58:12 +00:00
c237d6b7d7
Fix typo in last change.
1993-11-14 17:42:19 +00:00
bc94b1cf89
Add a few things that were missing, and fix some comments.
1993-11-14 17:41:37 +00:00
fa0d8faf42
Update from trunk:
...
Add the System V message queue and semaphore facilities. Implemented
by Daniel Boulet <danny@BouletFermat.ab.ca>
1993-11-14 14:45:16 +00:00
c5446cd8e0
add SYSVMSG and SYSVSEM
1993-11-14 14:40:44 +00:00
4878a43c3d
Add the System V message queue and semaphore facilities. Implemented
...
by Daniel Boulet <danny@BouletFermat.ab.ca>
1993-11-14 13:21:59 +00:00
5f65d904b7
Don't skip BIOS variables on boot if load address isn't 0
1993-11-13 16:31:48 +00:00
243bc4cc05
Boundary check on backspace.
1993-11-11 15:43:52 +00:00
b41210b362
add addr32, as noted on freebsd-hackers by bde himself.
1993-11-10 16:08:19 +00:00
2f5635f70b
A slightly unfinished i82586 driver, based on Garrett Wollman's.
1993-11-08 20:15:31 +00:00
5aa77a4ddc
Enable ie0.
1993-11-08 20:10:32 +00:00
34178aa2ef
don't use splclock()/splnone(), use splclock()/splx().
...
pointed out by david greenman.
1993-11-05 23:18:51 +00:00
ab12bacae0
note that use of splnone() is prolly bogus; splnone() itself is bogus,
...
so it's use is. 8-)
1993-11-05 23:18:04 +00:00
6ca8998c91
GENERIC: add mcd0
...
TEST: add mcd0, commented out
files.i386.newconf: add support for mcd driver
1993-11-04 09:28:26 +00:00
08c263706c
add mcd: Mitsumi CD driver by Holger Veit and Brian Moore
1993-11-04 09:12:30 +00:00
3bb5fc8b74
Enable is0.
1993-11-03 21:32:45 +00:00
fa3ccaa273
Change comment about pms.
1993-11-03 13:29:37 +00:00
e163596ee8
Fix some comments and enable tb.
1993-11-03 12:48:31 +00:00
dd896d55b8
A theoretically working version. The probe routine needs work.
1993-11-02 23:59:34 +00:00
6c77f913e9
I have pms. ;-)
1993-11-02 20:40:57 +00:00
3e21ea2e33
tablet line discipline compiles and probably works now.
1993-11-02 06:19:24 +00:00
3103af7e6b
Take advantage of special mask mode by leaving interrupts masked in ISR until
...
they are serviced. No need to frob IMR.
1993-11-01 08:36:50 +00:00
1a2c258aa6
Enable chaining IRQ only if we're using an IRQ on the slave. Other minor
...
cleanup.
1993-11-01 00:06:04 +00:00
44c93f17b5
Grumble. Just set the blasted ICU mode before every read. Also, send the EOIs
...
to the right port in isa_flushintrs().
1993-10-31 20:21:11 +00:00
b1c739de48
Need to change to reading ISR in isa_discoverintr().
1993-10-31 20:11:31 +00:00
58dd8e7222
Read ISR by default. If DIAGNOSTIC, display ISR and IRR status for stray
...
interrupts.
1993-10-31 20:05:43 +00:00
a4cf218142
Rearrange IDT initialization so it's easier to change ICU_OFFSET.
1993-10-31 18:36:21 +00:00
a74a4778b9
Enable fdc1 and assign it drq 3.
1993-10-29 20:38:46 +00:00
0f926f7b02
ttyfree() bugfix edition, plus various minor tweaks.
1993-10-29 08:58:34 +00:00
8bef6d7b03
Enable ed.
1993-10-29 04:33:34 +00:00
cgd