afcd602367
Create the ulpt devices that don't reset the printer on open.
...
(I don't get this, I could have sworn I committed these files a while ago.)
2002-02-11 14:57:31 +00:00
59b84cdaa8
Fix minor mistake made while increasing number of pty devices: where we had
...
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
2002-02-02 20:58:43 +00:00
1977a7b24e
Add support for many more (930 or 992) ptys than the current 256.
...
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
2002-02-02 07:04:44 +00:00
b537fda1d5
Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
...
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
2002-01-21 16:19:17 +00:00
e474b1951e
Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
2002-01-19 18:59:17 +00:00
de8d612984
Added clockctl
2002-01-13 14:08:48 +00:00
d5767e945e
fix a couple of spelling mistakes in the i4b* descriptions
2002-01-08 02:46:10 +00:00
b83df16226
Standardize ch* and uk* descriptions.
2001-12-19 18:29:56 +00:00
864c94c933
Standardize scsibus* description.
2001-12-19 17:58:05 +00:00
44f4566e1a
Change the way kernel sets are specified, and make them
...
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00
6424a6316a
Make more USB controller devices. You can easily have 6 these days.
2001-11-15 22:16:17 +00:00
8abd9b8182
Create wsmuxN and wsmuxctlN together.
...
Use separate nodes for wsmouse and wskbd.
2001-10-29 22:50:40 +00:00
9cf0f0364b
Allow creation of wsmuxctl devices.
2001-10-13 20:20:54 +00:00
1bdee7b3c6
Create stic devices.
2001-09-18 19:58:41 +00:00
5fdfced15e
Make pci and agp device nodes.
2001-09-15 04:45:28 +00:00
5cd421c8c0
Create dtyC* devices, as well.
2001-09-15 04:41:46 +00:00
504f009161
Add an entry to make wsmux devices.
2001-09-10 21:23:53 +00:00
47ae105daa
Add Makefile snippets to install netboot in installation/netboot
...
under ``make release''.
2001-05-28 18:21:12 +00:00
24ba541b4e
Follow up with style commit to put the isdn nodes in major number order.
2001-04-17 01:30:30 +00:00
02e8f1f2e5
First do minimal commit to correct botch in isdn major numbers.
2001-04-17 01:28:55 +00:00
62b732f7ac
Add ALTQ control devices.
2001-04-05 23:04:10 +00:00
11b1ba1e54
Make mlx0 as part of all.
2001-02-06 19:38:31 +00:00
8d75ab98d3
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 17:05:11 +00:00
fd6a417d77
Group isdn devices, so "sh MAKEDEV isdn" will create them all.
...
Add apropriate entries to the archs that already have isdn support
enabled in their cdev array.
2001-01-08 06:21:19 +00:00
02031bda76
Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
...
support was already in $MACHINE/$MACHINE/conf.c.
2000-12-05 18:18:04 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
23f6f01a0d
ca -> lsu
2000-10-19 14:35:41 +00:00
517687da81
Get the major no right for uscanner.
2000-10-14 12:36:05 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
bb3e285167
Add Cyclades-Z nodes.
2000-05-28 23:12:15 +00:00
b093a1430b
Make ca* devices.
2000-04-28 13:55:04 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
55f474fc12
Fix raidN device creation.
2000-01-21 16:46:04 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
c6459da685
add SES device
2000-01-20 17:13:27 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
0860075c8b
oops, wsmouse had same bad perms as wskbd
1999-10-19 23:19:38 +00:00
de4beb9532
Don't set wskbd* devices to 666, use 600 like every other arch, to
...
prevent random users remapping your console keyboard.
1999-10-19 22:26:52 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
22bead680a
Define the callunit variable for ttyU*.
1999-08-27 14:10:51 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
6e3b6566ce
* Define INSTALLATION_DIRS and BUILD_KERNELS.
...
* Build in src/distrib
* Call the new release targets in src/distrib/{alpha,notes}
Note: The notes installation command is MI and should eventually move
to somewhere in ../Makefile
1999-06-30 18:39:37 +00:00
55adfd0a58
Support a second tape and cd drive on installation ramdisks.
1999-05-13 22:08:48 +00:00
bc05796ee2
Set console and ttyE? term types to vt100.
1999-04-29 01:26:15 +00:00
1c98ea4e2a
+ttyEcfg
1999-04-23 18:45:50 +00:00
5a6330ac23
typo
1999-04-23 18:14:29 +00:00
193be65e25
under "minimal" correct a tyop: wsbkd0 -> wskbd0
1999-04-09 22:22:17 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
8e621ce2ee
Add MIDI and sequencer devices. They seem to work, even.
1999-03-22 07:52:56 +00:00
d0798bd8bd
kbd -> wskbd, mouse -> wsmouse
1999-01-19 22:27:35 +00:00
a6e0ab6a8c
On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
...
create at least eight bpf dev entries. (All except atari).
1999-01-16 01:40:27 +00:00
af27a191a5
Add ugen device.
1998-12-09 01:47:15 +00:00
11f3c29221
Add USB devices.
1998-11-29 06:57:46 +00:00
8bfd722a35
Added RAID devices for everyone!
1998-11-13 04:49:01 +00:00
7490553d67
Add /dev/scsibus* device nodes.
1998-10-15 21:22:51 +00:00
e4b5f53951
s/kdb/kbd/ in the `MAKEDEV minimal' target.
1998-09-19 06:58:06 +00:00
9726a43692
oops
1998-07-15 18:29:15 +00:00
8d94e6927f
add in rz28 and rz29 disks
1998-07-15 18:24:09 +00:00
416ac723a7
Add the "speaker" device.
1998-04-16 04:38:11 +00:00
31a32e5502
RCS Id Police.
1998-01-09 06:09:38 +00:00
60ac257eb3
Fixes PR #3858 : /dev/fd uniformly updated in MAKEDEV to make directory
...
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).
1997-11-26 03:09:23 +00:00
ffa1ced6be
add appropriate entry to make "random" as documented in rnd(4).
...
add "random" entry to "all".
1997-11-20 05:57:38 +00:00
d434714783
Add a minimal set of devices for install disks, etc.
1997-11-15 18:38:30 +00:00
4261733b62
Ooops. It's blk=2,chr=12, not the other way around.
1997-11-08 20:56:35 +00:00
e5a5043874
Make partition a of the 3.5" floppy label a 4.2BSD filesystem, rather
...
than unknown. (This now matches the i386.)
1997-10-27 04:45:38 +00:00
d4a3164363
ttyv* shouldn't be treated specially on the alpha (it's an i386-ism)
1997-08-22 12:04:03 +00:00
3e16910ca2
remove enss* before we try & mknod it
1997-08-22 10:46:27 +00:00
fca196598f
* use $((...)) not `expr ...`
...
* st* has perms 660 not 640
* use $0 not MAKEDEV
* add enss* to ss*
* remove superfluous use of umask
* ensure umask is reset after running MAKEDEV.local
1997-08-22 10:28:06 +00:00
912c4ee11f
Create /dev/audioctl and allow creation of multiple audio devices.
1997-08-18 21:23:12 +00:00
07a71fdfd0
Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
...
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.
1997-07-31 04:08:15 +00:00
ffde90f14b
Make all tty??/pty?? pairs that can be opened by openpty().
...
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.
1997-07-23 01:29:36 +00:00
840d172649
Make all MAKEDEVs make fd/* similar. No need for awk or expr.
...
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.
1997-07-22 23:13:05 +00:00
93f2294467
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:29:17 +00:00
a902cc2ba7
Added a new device entry for ipfilter: /dev/ipauth
1997-07-07 22:26:51 +00:00
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
1d27905d84
fix bogon in the ImageDisk entry, add an entry for 3.5" floppies (useful
...
for making floppy images w/vnd).
1997-03-18 19:55:00 +00:00
cf4d64cd22
add a couple more useful entries
1997-02-24 17:31:31 +00:00
5e3479c300
clean up slightly, add wd and fd (even though they don't have drivers in
...
the kernel yet).
1997-02-03 20:11:09 +00:00
45d3ac17e1
add 'ipl' device node entry, for ip-filter.
1997-01-07 00:10:07 +00:00
4bb3612c55
Device rename: `rd' => `md'
1997-01-01 23:46:17 +00:00
cb9edbe5f6
slight clean up of that last (fix some major numbers)
1996-10-18 21:53:27 +00:00
f753842b39
sync with conf.c: kill mmclock; add rd, audio, ss, and uk.
1996-10-18 21:16:39 +00:00
c893f3f107
{,r}cd0c's minor number was wrong; fix. Make all device nodes for
...
'cd', just like for 'sd', 'vnd', and 'ccd'.
1996-06-18 00:35:43 +00:00
1da97d57a9
add handling of lpt/lpa (interruptless) parallel printer port device
...
nodes (character, major 31). when making 'all', make lpa0 and lpt0.
1996-03-11 19:21:37 +00:00
010faa1d2c
add a way to build kbd and mouse devices
1996-01-05 17:12:39 +00:00
dfa3894a18
add device node for "mmclock," a high-resolution memory-mapped clock
...
pseudo-device.
1995-12-20 10:27:34 +00:00
44eff45879
shrink root and swap partitions by 15M each, and grow usr partition to match.
1995-10-13 03:09:39 +00:00
4086abf6dd
ufs -> ffs; PR #1381
1995-08-22 19:52:25 +00:00
7b8694c512
Add entries for the ccd.
1995-08-17 18:02:27 +00:00
88d0757cff
add a ttyE1 line
1995-07-30 19:52:13 +00:00
81481707aa
oops; ttyE* are major number 25
1995-07-30 19:30:53 +00:00
ad4d7c82c8
Use "std.9600" instead of "Pc" for the line type.
...
rename SCC tty devices from tty0? to ttyB?. add entries for ttyC?
(AlphaStation ns16550 "com" ports), and ttyE? (Workstation console
(framebuffer & keyboard) emulators).
1995-07-30 19:22:42 +00:00
augustss