21056065db
Move the code that enumerates the pnpbios device nodes into a
...
separate function.
2001-09-27 17:13:39 +00:00
69ed217599
ANSIfy, KNF.
2001-09-27 16:31:23 +00:00
984d919c49
Add ELF stuff to loader. This is a combined effort from Thomas Gerner and
...
myself.
2001-09-27 14:29:22 +00:00
7d1fc276fa
Make these compile with the old (a.out) toolchain.
2001-09-27 14:08:27 +00:00
9a679b0eb1
- add VR4181 ICU register map.
...
- add VR4181 intr levels.
- add VR4131 ICU register map.
- add VR4131 intr levels.
XXX: not yet tested these platform.
2001-09-27 13:59:37 +00:00
f5f7a94fa6
Add some missing definitions.
2001-09-27 13:27:54 +00:00
99247aadcc
Initial commit of the new bootloader to support ELF kernel.
...
It consists of two programs named boot_ufs and boot; the former reads
the latter (an OMAGIC a.out).
Boot now utilizes the libsa library to read the actual kernel.
- LFS code exists, but probobly does not work.
- Currently the ELF toolchain is required.
- Many features are missing.
2001-09-27 10:14:49 +00:00
7e950cc6e8
libsa for the new bootloader of x68k port.
2001-09-27 10:03:26 +00:00
8d3d810cc4
Embed the version number of the interface between the bootloader and
...
kernel. See amiga.
2001-09-27 09:55:10 +00:00
a68e13f815
implement generic soft interrupts as described in softintr(9). convert
...
the network, clock & serial softint's to use them.
2001-09-27 02:05:42 +00:00
541214b72d
clock_machdep.h was removed.
2001-09-27 01:08:22 +00:00
98ecb5b215
getprop* -> PROM_getprop*
2001-09-26 20:53:05 +00:00
64d9292e8c
*NEVER* cast a reference parameter to a different type.
2001-09-26 15:05:49 +00:00
0596817942
Apparently the old gas doesn't like *(%reg), so revert this one for now,
...
until everyone's switched to the new toolchain.
2001-09-26 14:07:51 +00:00
7b78937c2b
More '*' usage in indirect calls/jumps.
2001-09-26 09:58:39 +00:00
9a02c51726
Security check - don't paste new command line into bootblock that
...
don't look like the new style bootblock (with enough space in it).
2001-09-25 19:07:00 +00:00
e9023155ad
Replace skript by a C program, that knows how to manipulate the default
...
command line in the bootblock and to recompute the bootblock checksum.
2001-09-25 18:47:55 +00:00
e3f674b10c
Change a printf to DEBUG only.
2001-09-25 00:06:55 +00:00
766a9b8c9c
Change bus_space_mmap() signature to the official one.
2001-09-24 23:49:31 +00:00
36fb85f059
Put default command line into a fixed location with a known size.
...
This is intended to allow patching of the command line without a
compiler.
2001-09-24 20:27:08 +00:00
a5480e24b4
Hmm, on a.out platforms we have
...
size_t == unsigned int
on elf platforms we have
size_t == unsigned long int
So use %ld when printing and cast md->md_size to long.
2001-09-24 17:00:52 +00:00
ca59965026
Renamed platid_search() to platid_search_data() and added new platid_search().
...
Platid_name() was re-implemented using platid_search().
2001-09-24 14:29:30 +00:00
4c99916337
va_{start,end} audit:
...
Make sure that each va_start has one and only one matching va_end,
especially in error cases.
If the va_list is used multiple times, do multiple va_starts/va_ends.
If a function gets va_list as argument, don't let it use va_end (since
it's the callers responsibility).
Improved by comments from enami and christos -- thanks!
Heimdal/krb4/KAME changes already fed back, rest to follow.
Inspired by, but not not based on, OpenBSD.
2001-09-24 13:22:25 +00:00
b6426dff1e
Fix typo in !COMPAT_13 case.
2001-09-24 13:19:54 +00:00
ce2f39b63a
Hacking code piece, dumping PCI configration register.
2001-09-24 10:42:02 +00:00
1c35b74032
Enable ELF symbols in ddb.
2001-09-24 09:21:24 +00:00
c0233c6e50
Add missing argument to pmap_update().
2001-09-24 09:17:19 +00:00
7173d0a3e8
use pmap_kenter_pa() instead of pmap_enter() in a few places.
2001-09-24 05:37:50 +00:00
a52fa14deb
Run vfs_shutdown() if NOSYNC is *not* set, rather than set.
2001-09-24 03:56:03 +00:00
3628675acf
implement pmap_wired_count().
2001-09-24 01:48:15 +00:00
98b0d5654c
replace %ecx with %cl to silence new assembler warnings.
2001-09-24 01:09:33 +00:00
9b9300274d
GCC 2.95 generates significantly larger code with -O2 than our old compiler did; this can cause the second-stage bootblock to exceed the number of blocks that fit in the list in the first-stage bootblock. I thought we used to explicitly set -Os in here; anyway, with this change, we do now!
2001-09-23 23:43:29 +00:00
f5599abc0a
fix typo
2001-09-23 19:59:19 +00:00
2d16421460
Moved COMPAT_LINUX config stuff from arch/sgimips to arch/mips, so that it's
...
available on all Mips ports.
2001-09-23 19:45:41 +00:00
c9a848a23c
32-bit kernels have 32-bit pointers.
2001-09-23 17:31:17 +00:00
43ff3eb524
Nit -- this kernel is called "INSTALLSBC", not "INSTALL".
2001-09-23 17:30:52 +00:00
780a06ff07
Sync with "GENERIC".
2001-09-23 17:18:00 +00:00
6c1c0aff9c
improve interrupt response.
2001-09-23 14:32:52 +00:00
59c12af6f5
implement pmap_wired_count().
2001-09-23 09:01:13 +00:00
62b6d75cc8
implement pmap_wired_count().
2001-09-23 08:12:59 +00:00
142bd48453
config stuff for COMPAT_LINUX
2001-09-22 21:30:15 +00:00
151b90c898
Added Linux emulation support to Mips port
2001-09-22 21:29:20 +00:00
4061423088
BADREG was no longer defined.
2001-09-22 19:58:28 +00:00
53ebc1b431
Correct the `fast' int types.
2001-09-22 19:51:48 +00:00
5847ff0480
*int_fast64_t should be "long", not "long long".
...
From Klaus Klein.
2001-09-22 18:03:10 +00:00
0368c93d47
Move the functionality of eca_init_rx_hard() into the tail end of
...
eca_fiqhandler_tx and eca_tx_downgrade. This seems to reduce the
number of Rx overruns to zero on my current test case.
2001-09-22 17:19:27 +00:00
35de4e1a4c
Add fiq_downgrade_dont_disable, which does what fiq_downgrade does, but
...
doesn't disable FIQs in the process.
2001-09-22 17:16:18 +00:00
0143775c35
If OSLoadOptions is set to auto, boot straight to multi-user. Requested
...
one too many times and it seems to do no harm, so enable it.
2001-09-22 16:26:34 +00:00
ea073a0cd4
eca_init_rx_hard() shouldn't call eca_init_rx_soft(). That's the
...
whole point.
2001-09-22 15:33:53 +00:00
cddb5108f8
More re-arrangements: Split eca_init_rx() into two parts, one of which
...
(eca_init_rx_soft()) just sets up software state, and the other of
which (eca_init_rx_hard()) actually puts the interface into receive
mode and sets up the FIQ handler etc. Arrange that when we transmit a
frame, eca_init_rx_soft() has already been called, so we only need to
call eca_init_rx_hard() from the Tx downgrade handler.
The point of this is that I should be able to incorporate the
functionality of eca_init_rx_hard() into the Tx FIQ handler so that we
can switch from Tx to Rx with little enough delay that we don't drop
the first few bytes of the incoming frame.
2001-09-22 15:29:20 +00:00
thorpej