ec678aa9cd
Use L1_S_MAPPABLE_P() and L2_L_MAPPABLE_P().
2003-04-18 23:46:12 +00:00
8896997409
Gah, fix *another* typo.
2003-04-18 23:45:50 +00:00
7b16962da2
Quirk Pilotech CRW-600.
2003-04-18 23:38:18 +00:00
fa83041685
Regen for Pilotech CRW-600.
2003-04-18 23:31:43 +00:00
f700119cc7
Add Pilotech and its CRW-600 6-in-1 USB flash reader.
2003-04-18 23:28:09 +00:00
4e4a4c7bc9
Make the mode of /proc/<pid>/fd dr-x------
2003-04-18 23:19:24 +00:00
21e8a3bc0f
Oops, fix typo.
2003-04-18 22:44:54 +00:00
cd174e0605
make the copy_statfs_args() function copy all the fields that are not
...
set by the filesystems. Before my changes, the statfs code depended
on calling it with mp->mnt_stat, and did not explicitly initialize
anything!
2003-04-18 22:44:45 +00:00
08330568d0
Define two new macros to test if a mapping is mappable with an L1 Section
...
mapping or an L2 Large Page mapping.
2003-04-18 22:39:56 +00:00
78b1b81e74
Add a comment indicating that the current method of enabling high vectors
...
requires that the CPU control vector be properly readable. I believe that
all CPUs that have high vector support have a readable CPU control register,
but if we ever encounter one that does not, then we'll have to adjust this
code.
2003-04-18 22:30:05 +00:00
11cc5eb2c6
Make symlinks for directories that point to the actual directory.
...
Make symlinks to [kqueue] and [misc] for kqueue and misc fds.
2003-04-18 21:55:35 +00:00
63deb1bd73
Cast __greg_t to/from caddr_t via intptr_t.
2003-04-18 21:07:35 +00:00
9957a9bbe4
Now that UBC no longer creates writable virtual aliases (for PMAP_VIVT),
...
we no longer need to track mappings added by pmap_kenter_pa() for the
purpose of cache-alias detection.
2003-04-18 20:02:34 +00:00
f97e7c222f
Need to bump uvmexp.intrs when taking a h/w interrupt.
2003-04-18 19:57:11 +00:00
761db756a1
- remove definitions of SIZE and STRIP which should be defined elsewhere
...
- use mips/conf/stand.ldscript so that objcopy -O binary works
2003-04-18 19:12:01 +00:00
0b271b64a6
Use LEAF_NOPROFILE().
2003-04-18 18:52:27 +00:00
a34a62065c
Revert part of previous. sdstrategy() no longer calls
...
bounds_check_with_label() for RAW_PART.
2003-04-18 15:57:37 +00:00
8178e19cb6
fix a use of an uninitialized variable.
2003-04-18 15:19:02 +00:00
98d49ded24
Add support for ARM32_PMAP_NEW and ARM32_NEW_VM_LAYOUT to the iq80321 port.
2003-04-18 12:01:32 +00:00
3fe47173f5
Didn't mean to leave PMAP_DEBUG enabled ...
2003-04-18 11:55:26 +00:00
b84e9438dd
Enable ARM32_PMAP_NEW on NetBSD/shark.
2003-04-18 11:11:51 +00:00
41a1932e58
Add the generic arm32 bits of the new pmap, contributed by Wasabi Systems.
...
Some features of the new pmap are:
- It allows L1 descriptor tables to be shared efficiently between
multiple processes. A typical "maxusers 32" kernel, where NPROC is set
to 532, requires 35 L1s. A "maxusers 2" kernel runs quite happily
with just 4 L1s. This completely solves the problem of running out
of contiguous physical memory for allocating new L1s at runtime on a
busy system.
- Much improved cache/TLB management "smarts". This change ripples
out to encompass the low-level context switch code, which is also
much smarter about when to flush the cache/TLB, and when not to.
- Faster allocation of L2 page tables and associated metadata thanks,
in part, to the pool_cache enhancements recently contributed to
NetBSD by Wasabi Systems.
- Faster VM space teardown due to accurate referenced tracking of L2
page tables.
- Better/faster cache-alias tracking.
The new pmap is enabled by adding options ARM32_PMAP_NEW to the kernel
config file, and making the necessary changes to the port-specific
initarm() function. Several ports have already been converted and will
be committed shortly.
2003-04-18 11:08:24 +00:00
9c5cceb804
In arm32_vector_init(), if the vector page is ARM_VECTORS_HIGH, make
...
sure the CPU_CONTROL_VECRELOC bit is set in the cpu control register
before returning.
2003-04-18 10:51:35 +00:00
c8ba6cb1b9
- In the various cpu_setup() functions, check if the vector page
...
is at ARM_VECTORS_HIGH and set CPU_CONTROL_VECRELOC if so.
- Don't de-ref a NULL args pointer in parse_cpu_options().
2003-04-18 10:45:23 +00:00
b7b5aac957
change PROCFS_FILENO() to use 5 bits for 'type', since there are more than
...
16 types nowadays (i.e. Pfd is 17)
2003-04-18 10:00:19 +00:00
dc7d5edb51
fix fatal typo
2003-04-18 09:23:17 +00:00
4549723d92
iszthreepa() takes a physical address, not a virtual address.
...
This fixes PR 19175, reported and heavily debugged by Pawel Chwalowski.
2003-04-18 09:18:19 +00:00
c6c94cfec3
Make sure _bus_dmamap_load_mbuf() converts cpu-relative addresses
...
to bus-relative addresses.
Spotted by John Gordon, on port-powerpc@.
2003-04-18 09:16:05 +00:00
2248468d68
add my 80 GB SATA drive to the quirk table.
2003-04-18 04:32:19 +00:00
5a20f4be3c
* Add a generic power management event API, defined in <sys/power.h>.
...
Right now, only power switch state change events are supported. This
is a work-in-progress.
* Add support to sysmon for delivering power mangement events to userland.
Add poll, kqueue, and read entry points to sysmon.
* Adapt ACPI to use the new generic <sys/power.h> event types.
This provides the kernel support for a forthcoming powerd(8) which can
do nice things like gracefully shut the system down when an ACPI power
button is pressed.
2003-04-18 01:31:34 +00:00
3a00c85d38
Add a KASSERT to make sure that "sizeof(struct mbuf)" is MSIZE.
...
Extra insurance for Steve Woodford's recent <sys/mbuf.h> patch.
2003-04-18 01:24:20 +00:00
d1b448c6e5
From current-users:
...
On Thu, Apr 17, 2003 at 11:26:26AM -0500, Dave Huang wrote:
> Typo police here :) "whose," not "who's."
2003-04-18 00:35:14 +00:00
091e93c002
Bump ramdisk size to 4600 blocks.
2003-04-17 22:57:16 +00:00
f35804411a
depreceated->deprecated
2003-04-17 22:55:29 +00:00
062bcd3204
acpi.c needs sysmon_power too.
2003-04-17 20:56:29 +00:00
f331bb3205
do not show nodes corresponding to directory descriptors for process
...
in fd/ subdirectory, nor allow lookup/open for the nodes
this fixes PR kern/21187 for good, and also avoids interesting directory
locking issues
2003-04-17 20:50:46 +00:00
884bdfdbaf
procfs_readdir(): in Pfd case, only show descriptors of types we want
...
how to represent (vnodes, fifo, pipes); also use fd_getfile() et al
this avoids annoying EOPNOTSUPP error messages from ls -F and such
2003-04-17 20:33:17 +00:00
be4c900d41
procfs_lookup(): use fd_getfile() et al in Pfd case
2003-04-17 20:19:18 +00:00
1279513402
Need PAGE_SIZE definition for mptramp.S
2003-04-17 20:00:03 +00:00
ee5b1a7c61
Protect the definition of offsetof().
2003-04-17 19:58:57 +00:00
ed9a5a7448
use fd_getfile() in procfs_getfp(), and FILE_USE()/FILE_UNUSE() the
...
returned file descriptor pointer appropriately
2003-04-17 19:04:25 +00:00
5b38542fe2
Bump MSIZE to 512.
2003-04-17 18:20:17 +00:00
b5bca36101
g/c, it's outdated and the info wouldn't belong here anyway
2003-04-17 18:14:57 +00:00
64b598bf33
make some local arrays/variables static + const
2003-04-17 18:08:28 +00:00
2dcd4d2952
Clear hardware checksum flags before reusing a mbuf for an ICMP reply as
...
suggested by Enami Tsugutomo. This fixes PR kern/21203 by myself.
2003-04-17 16:57:49 +00:00
9d23bccfba
add quirk for Avance Logic USB Audio
...
provided in PR kern/18986 by Yasushi Oshima
2003-04-17 16:43:44 +00:00
8d4a0cf374
regen:
...
fix handle for Avance Logic (AVANCELOGIC, not ADVANCELOGIC), and add
id for their USB Audio Speaker
provided in PR kern/18986 by Yasushi Oshima
2003-04-17 16:41:48 +00:00
e566bf6b6e
fix handle for Avance Logic (AVANCELOGIC, not ADVANCELOGIC), and add
...
id for their USB Audio Speaker
provided in PR kern/18986 by Yasushi Oshima
2003-04-17 16:41:00 +00:00
5e0c8413f3
uaudio_match_alt_sub(): fix the rate check in UA_SAMP_CONTNUOUS case
...
to match if UA_SAMP_LO() == UA_SAMP_HI() == rate
problem reported and fix provided in PR kern/18986 by Yasushi Oshima
2003-04-17 16:38:02 +00:00
d97029d2df
Fix a problem first reported by Simon Burge when paddr_t is 64-bits on an
...
ILP32 platform.
What happens is that the compiler inserts padding in struct mbuf between the
MH_pkthdr and MH_dat members, due to the paddr_t in struct _m_ext.
Unfortunately, the old MLEN/MHLEN macroes fail to take into account this
padding and, thus, wind up making sizeof(struct mbuf) > MSIZE. This causes
mbuf corruption, which eventually leads to all sorts of bogosity on ILP32
platforms with a 64-bit paddr_t.
Thanks to simonb@ and fvdl@ for helping to track down this bug.
2003-04-17 16:15:36 +00:00
f41a4264a0
Remove some items to save space.
2003-04-17 14:45:33 +00:00
41aa5664b5
Add mpt.
2003-04-17 13:32:28 +00:00
2807f6e56a
A bit of an ugly workaround to avoid a warning for a larger MSIZE.
...
Shouldn't make a difference in the generated code.
2003-04-17 13:12:39 +00:00
72911290d9
Comment fixes from OpenBSD.
2003-04-17 12:58:18 +00:00
00abb49877
if 0 out some redundant asserts.
2003-04-17 12:52:21 +00:00
097bf36e7f
Fix size_t printf formats in DIAGNOSTIC case.
2003-04-17 12:34:25 +00:00
cf3fb808d7
Fix DIAGNOSTIC link error (switch_error label).
2003-04-17 12:33:49 +00:00
ad311c1708
Replace arm32 with arm ports that include the driver name in their GENERIC
...
(or any other kernel config, if no GENERIC exists).
Sort.
2003-04-17 11:55:08 +00:00
d75ae2c6f5
no iic, thus no rtc@iic, thus no todclock@rtc.
2003-04-17 11:45:13 +00:00
0a98e2c329
Correct the previous commit, getmcontext has no local 'gr' variable like i386.
2003-04-17 09:36:47 +00:00
0545901d27
configdirs was changed to an array of u_int8_t, so don't compare values
...
to 65535.
2003-04-17 09:32:43 +00:00
b7394dfe47
Adapt to the sysmon_pswitch interface.
2003-04-17 01:34:14 +00:00
ea45f2ccc1
Oops, remove a debugging define.
2003-04-17 01:26:41 +00:00
59ea64b6f0
* Don't do the ACPI_PCI_FIXUP unless it is explicitly enabled in
...
the kernel config file. That code makes a total mess of any
system with multiple PCI busses.
* Rework the way buttons are handled; register them with sysmon,
and let it take the appropriate action. This lets us gracefully
shut down when the power button is pressed.
2003-04-17 01:22:21 +00:00
b0f79c65ce
Start at a power management framework for sysmon. Right now we just
...
provide some VERY basic support for power/sleep buttons and lid switches;
if someone presses the power button, shut down the system semi-gracefully.
Eventually, we will send events for all types of button/lid events down
to a userland power management daemon, which will be able to define a
separate policy for each button/switch.
2003-04-17 01:02:21 +00:00
2362be75a3
cpu_getmcontext: Test for the the presence of FP state in a LWP by
...
looking for MDP_FPUSED in l->l_md.md_flags, instead of
l->l_addr->u_pcb.pcb_fpcpu being non-NULL. The latter indicates that
FP state is live in the FPU *now*, but doesn't indicate whether there
is any state saved in the PCB.
2003-04-17 00:15:19 +00:00
9cac2cc6d1
Add mpt(4).
2003-04-16 23:39:02 +00:00
e56e76188e
Fix a typo.
2003-04-16 23:36:22 +00:00
f2e804cd79
Add mpt(4).
2003-04-16 23:34:30 +00:00
62ba316156
rasops32_putchar: don't paint character out of font limits.
2003-04-16 23:28:41 +00:00
6f2e904450
Use the standard fixed-sized types on NetBSD.
2003-04-16 23:24:01 +00:00
6c29c1f6fb
In the polling case, don't call mpt_timeout() twice.
2003-04-16 23:17:30 +00:00
98f531d377
mpt_dma_mem_alloc(): If we fail, only destroy request DMA maps that
...
were actually created.
2003-04-16 23:16:41 +00:00
81a8dadfcf
Correctly sync the MPT request buffers, and remove BUS_DMA_COHERENT
...
from the mapping of those buffers.
2003-04-16 23:02:14 +00:00
60c3e62a42
Add files for 2nd stage boot loader
2003-04-16 22:36:14 +00:00
b10e65e490
Uncomment line that deletes tempory file
2003-04-16 22:34:00 +00:00
415cb92c98
Add functions needed by new boot code
2003-04-16 22:30:40 +00:00
2737b135d5
bootxx: bootstrap code - installable by MI installboot.
...
Loads /boot using filesystem accesses (rather than a list of block numbers)
2003-04-16 22:27:35 +00:00
eb2692a8d2
bootxx: bootstrap code - installable by MI installboot.
...
Loads /boot using filesystem accesses (rather than a list of block numbers)
2003-04-16 22:16:36 +00:00
7e4fd7b547
Device driver for the LSI Logic Fusion-MPT based SCSI and Fibre Channel
...
adapters. Currently supports:
* LSI 53c1030 Ultra320 SCSI
* LSI FC909, FC909A, FC919, and FC929 Fibre Channel
Ported from the FreeBSD "mpt" driver, written by Greg Ansley. Thanks
to Frank van der Linden for testing and some bug finding.
This work was sponsored by Wasabi Systems, Inc.
2003-04-16 22:02:59 +00:00
80ecd573c0
PR/1796: John Kohl: statfs misbehaves under chrooted environments.
...
- Under chroot it displays only the visible filesystems with appropriate paths.
- The statfs f_mntonname gets adjusted to contain the real path from root.
- While was there, fixed a bug in ext2fs, locking problems with vfs_getfsstat(),
and factored out some of the vfsop statfs() code to copy_statfs_info(). This
fixes the problem where some filesystems forgot to set fsid.
- Made coda look more like a normal fs.
2003-04-16 21:44:18 +00:00
c8db3bdc65
Partially reverse previous change.
...
Reset RTC only if ntp is running or adjtime system call has changed time.
2003-04-16 21:37:37 +00:00
8a94d0064f
Remember if ntp has adjusted clock rate, hardware RTC may be wrong.
2003-04-16 21:35:07 +00:00
8eefc5d061
Flag that adjtime has happened, hardware RTC might be wrong
2003-04-16 21:34:15 +00:00
c4921eb479
Remove extra right paren.
2003-04-16 21:08:06 +00:00
5a5a2a6da3
make /dev/reload optional (it is implemented for a.out kernels only, at
...
the moment.)
2003-04-16 20:43:29 +00:00
cf2e4206b1
make /dev/reload optional. (It is only implemented for a.out kernels at the
...
moment.)
2003-04-16 20:42:34 +00:00
ce68b169df
* Change the APIs that handle the sync period to work with 100ths of ns,
...
rather than 10ths of ns. This is necessary in order to represent
Ultra320 SCSI.
* Add Ultra320 SCSI to the scsipi_syncparams[] table.
We're not going to bother bumping any version numbers with this change; only
the "hba" driver uses scsipi_sync_period_to_factor(), and the uses of
scsipi_sync_factor_to_period() are all internal to the scsipi code. Most
things just pass the factor around, which is unchanged by this.
Reviewed by Frank van der Linden.
2003-04-16 20:25:59 +00:00
c0d7b8d87a
move declaration of getcwd_common and constant to the header file.
2003-04-16 20:00:03 +00:00
35632a80ac
lfs code is built from ufs.c
2003-04-16 19:52:58 +00:00
01761b17f4
Remove unnecessary caddr_t casts
2003-04-16 19:20:33 +00:00
ab1f41a716
Add definitions (#defined out) to pass the result of the v3.x bios
...
extended disk information request to the kernel.
Binary compatible with the existing code, disabled because I don't
have a system with a bios that supports the request.
2003-04-16 19:16:42 +00:00
1c31ec44a3
Don't set the RTC to kernel time during shutdown.
...
This stops the system RTC drifting if any hardclock ticks were missed (eg
if the system spent any time at the kdb prompt).
The RTC is set whenever the system clock is set, so setting at shutdown
is unnecessary.
2003-04-16 19:07:34 +00:00
fe778b7b70
Remove definition of LIBSA_SUPPORT_UFS2, the source will only build separate
...
ufsv1 and ufsv2 objects (the merged one was too large for the code that only
supported a single fs type).
2003-04-16 19:03:33 +00:00
7d83b6157f
Comment out debug printf.
2003-04-16 18:53:50 +00:00
586810c59b
Routines to switch between 16bit real and 32bit protected modes
2003-04-16 17:38:43 +00:00
0c5af93233
Add some debug prints to the memory size code
2003-04-16 15:03:59 +00:00
aec10dd80c
Nake return values from bounds_check_with_label() conform to the man
...
page: -1 for error, 0 for EOF, 1 otherwise. Inspired by an OpenBSD commit
message, pointed out by Miod Vallat in private mail.
vax/mba/hp.c: check return value <= 0, not < 0 to be concistent with how
other places handle return values from bounds_check_with_label().
2003-04-16 15:00:59 +00:00
cb61d88cb5
Add baud_rate arg to cominit_d
2003-04-16 14:58:32 +00:00
e60ac53619
Modify baud rate handling to make it easier to take it from a variable.
...
Default to 9600 if the requested baud rate is illegal.
2003-04-16 14:56:55 +00:00
503590c138
sync a comment with reality.
2003-04-16 14:51:55 +00:00
aa51f25824
ufs_rwXX: cast to unsigned even without FFS_EI to avoid
...
possible nasty signed vs unsigned problems.
2003-04-16 14:27:03 +00:00
d5b5933e8c
remove unused defines
2003-04-16 14:23:11 +00:00
616c6baa61
Add code to parse V3.x bios disk information.
...
This should let NetBSD guarantee to tie together the bios disk numbers
with the physical hardware.
#defined out because I don't have a system with a bios that supports it.
2003-04-16 14:22:29 +00:00
1963d34b78
use bswap32 and bswap64 correctly.
...
(fs_pendingblocks and fs_pendinginodes)
2003-04-16 14:20:25 +00:00
621f25533d
Add cvs version, delete unused definition
2003-04-16 13:49:21 +00:00
2ae46742a2
Add prototyps for all the asm bios/dos calls
2003-04-16 13:47:53 +00:00
4cf0478777
additional support routines for boot code
2003-04-16 13:24:09 +00:00
1d68743dfc
C code now sets length of disk info structure
2003-04-16 12:45:10 +00:00
7119639d07
used daddr_t for disk block numbers,
...
add definitions for v2 and v3 disk info structures
2003-04-16 12:43:45 +00:00
fd18f39232
Use daddr_t for disk block numbers,
...
Set size of extended disk info structure in the C code
2003-04-16 12:41:03 +00:00
56a51233b4
Make it wsfont/wsfont instead of wsfont/wsmux, just like the other ports.
2003-04-16 09:41:54 +00:00
054da0dc1b
make parameter 'name' for db_del_symbol_table() const
2003-04-16 09:00:29 +00:00
b1986a13d0
change 'data' arg of fp_ioctl to 'void *' to match file.h
2003-04-16 08:58:18 +00:00
f1a857b8af
change 'data' arg of fo_ioctl to void * to match file.h
2003-04-16 08:56:42 +00:00
d0152b0231
ffs_reclaim may be called while the dinode pointer in the inode structure
...
is still NULL (in the case of an error in ffs_vget). Check for this
condition before doing a pool_put.
2003-04-16 07:38:25 +00:00
3e475eb186
From PR port-i386/20464, by Yoshihisa Nakagawa: Match i845G AGP bridge.
2003-04-16 07:37:09 +00:00
0b2e3c6317
add missing setting of b_error (thanks Manuel)
2003-04-16 00:07:17 +00:00
44a844916d
Regen.
2003-04-15 23:15:47 +00:00
155de892db
Another VIA device.
2003-04-15 23:15:23 +00:00
b855d8716e
Add another VIA CPU-AGP bridge.
2003-04-15 23:13:50 +00:00
78a6a01cac
Pullup short mbuf in wm_tx_cksum() instead of dropping it which fixes
...
PR kern/21190 by myself. Jason R. Thorpe code reviewed the changes.
2003-04-15 22:52:40 +00:00
c327a133c6
Significantly faster memcpy/memmove/bcopy and memset/bzero
2003-04-15 22:49:50 +00:00
7c8e4cdaea
Add interface to boot password checking code that takes password parameter.
2003-04-15 22:26:42 +00:00
c0cc8d30c1
Regen.
2003-04-15 21:43:56 +00:00
dd9495f867
Add ID for ITE IT8152 companion chip.
2003-04-15 21:32:28 +00:00
b2beaa1fbd
wm_tx_cksum(): Set the initial offset correctly for packets using
...
802.1Q encap.
2003-04-15 21:12:24 +00:00
ad743e234b
Add a missing paren.
2003-04-15 19:14:58 +00:00
8dac8843a5
Implement (and document!) "dkctl <dev> badsector .." to `manage' the bad
...
sector information in the kernel. Doing this uncovered some shortcomings
that should have been pretty obvious with the code committed prior, addressing
the major kludge with a new struct - disk_bacsecinfo to be passed into
DIOCBSLIST.
2003-04-15 18:27:26 +00:00
277607fced
fix typos
2003-04-15 17:42:44 +00:00
c7bbfa679e
Mark 'ram' MEMORY as allocatable instead of explicitly placing
...
sections into it. This also ensures that sections, not mentioned in
the linker script (currenty - link_set_*), end up in the correct
place. Otherwise kernel panics very early, trying to access link_set
info.
2003-04-15 16:29:12 +00:00
f4965045a0
Automatically build up a list of bad sectors from failed read operations and
...
prempt read operations on matching regions with a failure rather than waiting
for the device to return a failure. The I/O operation must have already failed
MAXRETRIES times before being added to the list - this can generally take up
to 12 seconds.
List is made accessible to userspace via DIOCBSLIST and DIOCBSFLUSH.
2003-04-15 14:11:00 +00:00
57d5f20055
Add definitions for i386 boot parameters
2003-04-15 13:59:35 +00:00
0012a58814
fix indent.
2003-04-15 13:51:11 +00:00
63de87c34b
remove line-wrapping that is no longer needed.
2003-04-15 13:48:40 +00:00
ab7df78c6d
ANSIfy proc_unstop
2003-04-15 12:11:25 +00:00
5f549c5ea8
Add a quirk for the Tandberg SLR/5
...
Fix supplied by Rex McMaster in PR kern/13603
2003-04-14 16:18:23 +00:00
971ce6c243
Remove membase and memsize device config parameters.
2003-04-14 14:20:10 +00:00
9e4c3aa218
Remove unused structure member variables.
2003-04-14 14:18:41 +00:00
8704a520e3
Remove unused sa_membase and sa_memsize structure member variables.
2003-04-14 14:16:10 +00:00
225615a61a
avoid calling toupper with posibly -ve value. fixes PR 21171
2003-04-14 11:33:40 +00:00
488c2452ee
clean-up unused definition.
2003-04-14 01:44:06 +00:00
351bc1e187
Remember to close the component if we decide it's not suitable for use
...
as a hot spare. Closes PR#20989 by David Brownlee.
2003-04-13 22:07:11 +00:00
44617bfaa7
Add quirk for Genesys Logic GL641USB. From PR kern/21131.
2003-04-13 20:54:31 +00:00
6ff706ac19
CONSTCONT should have been CONSTCOND
2003-04-13 09:08:04 +00:00
b757e31c2a
Fix error message for 64bit daddr_t
2003-04-13 07:51:30 +00:00
dcc0f5a63d
Fix typo in printf message.
2003-04-13 04:07:34 +00:00
a09cd2fd46
typo, s/TX4/TX2/
2003-04-13 01:53:00 +00:00
dcf4c9093f
fix a typo in the previous.
2003-04-12 14:41:28 +00:00
1505b097fa
set b_resid correctly.
2003-04-12 14:38:57 +00:00
f8b7159909
unbusy a page after put it on the queue.
...
fix a panic with UVM_PAGE_TRKOWN when doing swapoff.
2003-04-12 14:36:43 +00:00
9ad479d8c2
split nfs_doio to nfs_doio_{phys,read,write} to avoid too deep indents.
2003-04-12 14:26:58 +00:00
38fd615cff
add an older pci id for SATA150TX2PLUS, too
2003-04-12 10:41:04 +00:00
ba400f9233
Don't cache buffers used when finding the superblock, it can lead to
...
seeing bogus data for the first cg with certain block/frag sizes.
From enami tsugutomo.
2003-04-12 10:35:58 +00:00
9e0b0abaa7
Use variables for some cg accesses; makes things more readable and more
...
similar to FreeBSD. No functional change.
2003-04-12 10:33:17 +00:00
4a09954028
PR/9286: Steven Grunza: Win98 warm boot puts 3c905B in state D3 and causes
...
ex driver failure
2003-04-12 09:03:25 +00:00
611ca7be61
regen
2003-04-12 08:41:20 +00:00
f45b1c425d
PR/8754: Andreas Wrede: Add SIIG devices
2003-04-12 08:40:48 +00:00
2d2910a91a
PR/21108: Christopher SEKIYA: if_wi_pci.c rev 1.21 is incorrect for PLX-9052
2003-04-12 08:17:45 +00:00
4dcb48921b
Use "options<space><tab>".
2003-04-12 07:39:39 +00:00
043759a005
- do FILESYNC writes if we're freeing the page or the page doesn't
...
belong to us. otherwise, data will be lost on server crash.
- use b_bcount instead of b_bufsize to determine
how many pages we should deal with.
based on a patch from Chuck Silvers.
discussed on tech-kern.
2003-04-12 06:53:09 +00:00
8d11ba186d
Add some delays between 8bit reads of DSTAT and SSTAT0 registers
...
as per the 53c710 manual. Pointed out by fredette in osiop_gsc.c long ago.
2003-04-12 06:42:38 +00:00
49c64e1d70
Fixes from OpenBSD:
...
- Fix index bounds checking in save data pointers logic.
- Fix an indent problem and an extra blank space.
2003-04-12 06:11:15 +00:00
d1a84b8d3f
kill the ASYNCMAP ones1
2003-04-12 05:01:01 +00:00
c56f7f428b
get rid of the ASYNCMAP ioctls
2003-04-12 05:00:38 +00:00
9b3ce45b2a
Add two new mbuf routines:
...
* m_apply(), which applies a function to each mbuf in chain
starting at a specified offset, for a specified length.
* m_getptr(), which returns a pointer to the mbuf, as well as
the offset into that mbuf, corresponding to an offset from
the beginning of an mbuf chain.
From OpenBSD, cleaned up slightly by me.
2003-04-12 02:49:25 +00:00
6045dfd329
PR/991: Darren Reed: Add a sysctl (checkinteface) to implement this. This
...
implementation is taken from FreeBSD, but we default to off.
XXX: We should really do this on a per ifaddr basis as jason suggested.
2003-04-12 00:17:49 +00:00
ff28c51cc0
Make cpu_getmcontext() run the PC through ras_lookup() so that kernel
...
getcontext() plus userlevel setcontext() (as used in libpthread) respects
the atomicity of RAS regions.
2003-04-11 22:02:28 +00:00
23df4fb463
Use PAGE_SIZE rather than NBPG.
2003-04-11 21:20:45 +00:00
565d9732ff
PR/991: Darren Reed: Add a sysctl (checkinteface) to implement this. This
...
implementation is taken from FreeBSD, but we default to off.
XXX: We should really do this on a per ifaddr basis as jason suggested.
2003-04-11 19:41:37 +00:00
ea7f1bd035
Add a VNDIOF_FORCE flag which forces unconfiguration if the emulated
...
disk is still in use.
Not for everyday use, but we have to face eg USB flash drives being
unplugged at the wrong time, and this is a way to simulate this without
wearing out the connectors.
2003-04-11 16:11:49 +00:00
7e56069d9c
IPR_VJ -> IRIP_VJ
2003-04-11 14:55:39 +00:00
93c6f5d089
Rename the IPR_VJ option into IRIP_VJ (as irip(4) told all the time),
...
create an opt_ header and make the dependency on slcompress.c more exact.
(OK by martin)
2003-04-11 14:45:27 +00:00
4cdcaab92d
Remove diagnostic ufs_vinit check, this isn't quite the right place for it;
...
it'll be reinstated elsewhere.
2003-04-11 14:13:28 +00:00
7a2abff303
Always include (new) cpuconf.h.
...
From Christopher SEKIYA in PR port-sparc/21093.
2003-04-11 13:55:24 +00:00
eacecff6bb
Install (new) cpuconf.h.
...
From Christopher SEKIYA in PR port-sparc/21093.
2003-04-11 13:54:16 +00:00
243bb03c7c
Explicitly specify both ffsv1 and ffsv2
2003-04-11 11:36:28 +00:00
4efa73a16e
Build ffsv1 and ffsv2
2003-04-11 11:31:44 +00:00
ef32565239
Add externs for ffsv1_xxx and ffsv2_xxx
2003-04-11 11:30:12 +00:00
f671893500
Files to build ffsv1 and ffsv2 versions of ufs.c
2003-04-11 11:28:54 +00:00
af3660bcdb
Use common ffs/lfs file ufs.c instead of lfs specific version.
2003-04-11 11:27:06 +00:00
5a0534abeb
Merge in lfs.c, use defines to build ffsv1, ffsv2, lfsv1 or lfsv2.
...
(removes the ability to build a single ufs.o that supports ffs v1 and v2,
that animal was too large for some of the boot code.)
Use shifts and masks to avoid pulling in 64bit divide.
2003-04-11 11:24:49 +00:00
64f0bf8882
Adjust diagnostic check for bad mode field; only the VNON case should
...
matter. From Enami.
2003-04-11 10:36:33 +00:00
fbf4bd0cfe
Put extern definition of bcopy in () to avoid macro expansion when
...
LIBSA_USE_MEMCPY is defined. Fixes breakage because the return
type of memcpy() is different to that of bcopy.
2003-04-11 10:34:38 +00:00
b0715b0b82
Make ffs_cg_swap() works even if same chunk is passed as new and old cg.
...
This is necessary to prevent newfs from dumping core when it is asked to
create a UFS1 file system of non-native endian.
2003-04-11 10:20:35 +00:00
0cdf56e3e6
Fix a tyop in a comment.
2003-04-11 06:24:59 +00:00
07db7d8001
add Promise ATA/150 TX4 id
2003-04-11 02:49:40 +00:00
e200992e30
Use Tungsten T instead of m550.
2003-04-11 01:30:10 +00:00
fe2cc35875
Regen; rename Palm M550 to Tungsten T.
2003-04-11 01:28:18 +00:00
bbd68bc758
Rename Palm M550 to Tungsten T.
2003-04-11 01:25:25 +00:00
cf6014f0ed
use VREAD instead of VWRITE, this ioctl is used to redirect console output.
2003-04-10 22:35:00 +00:00
b9f9db3ca2
Bye Bye UCONSOLE
2003-04-10 22:06:51 +00:00
c4d28a0983
PR/732: Matt Green: TIOCCONS should work if the user owns /dev/console.
2003-04-10 22:05:57 +00:00
39a063b681
back to genfs_eopnotsupp() for vop_remove, vop_link, vop_rename,
...
vop_mkdir, vop_rmdir - it does the right unlocking now
2003-04-10 21:57:26 +00:00
98f212db7d
use former genfs_eopnotsupp_rele() as genfs_eopnotsupp(), so that vnodes
...
are vput()/vrele()d as necessary - some filesystems did use the wrong
one for some ops, and it's just safer to not take the chance
based on suggestion by Bill Studenmund
2003-04-10 21:53:32 +00:00
b41f818f25
change some printf()s on easily-triggerable codepaths to dprintf()
2003-04-10 21:37:32 +00:00
a6705f1a3f
Remove MAP_NOEXTEND. Its existence in sys/mman.h (which ended before
...
you read this) was the only reference to it in the entire source tree.
2003-04-10 21:35:20 +00:00
1ac1ffed36
improve genfs_eopnotsupp_rele() so that's usable for vop_rename,
...
which uses WILLPUT for member which may be NULL
handle correctly dvp == vp case for WILLPUT members, so this works
for vop_remove, vop_rename
thanks Bill Studenmund for code&comments on this
2003-04-10 21:34:12 +00:00
8cb79c1cc6
typo
2003-04-10 20:57:01 +00:00
c157f669ac
regen:
...
'tvp' in vop_rename needs to be vput(), not vrele()d, so adjust the
definition here to match current reality
okayed by Bill Studenmund
2003-04-10 20:38:12 +00:00
thorpej