f5b5efa5d5
Update to match kernel changes.
1996-09-08 14:37:39 +00:00
22018a843b
Reference the new sl(4) page
1996-08-10 21:26:42 +00:00
a26a090a50
Fix disklabel to deal with some syntax errors a little better.
...
Mostly, when someone specifies a partition entry like:
c: 1295850 0
or
g: 1295850 0 4.2BSD
disklabel would dump core. Now it generates a warning like it should
in the first case and complains about too few fields in the second.
Perhaps I should just default to unused in the first case, but this prevents
core dumps. (pr bin/2659)
1996-08-10 18:54:48 +00:00
ddcb18b00b
Don't display cylinder comments if the number of cylinders is zero. This
...
closes pr bin/2683.
1996-08-10 17:59:01 +00:00
408ead452e
Make sure to fill in the whole sockaddr_in when sending a discovery packet.
1996-08-10 02:37:41 +00:00
8d1a5585e8
Add a manual page link from routed(8) to rdisc(8) as suggested by
...
Giles Lean <giles@nemeton.com.au> on the tech-net@NetBSD.ORG mailing
list. The rationale for this is that folks may be used to rdisc(8)
or in.rdisc(8) on other systems, and may not realize that NetBSD
implements ICMP Router Discovery in the routed(8) program.
1996-08-10 01:48:41 +00:00
fc1a524603
- Finished up merge.
...
- Add some prototypes and definitions for types as necessary,
wrapped in __NetBSD__ to maintain portability.
- Explicit size types in structures that go out the wire.
- RCS id police.
1996-08-10 01:28:58 +00:00
b1e0bd39e1
A leaner, meaner routed(8), implementing RIPv1, RIPv2, and ICMP Router
...
Discovery, courtesy of Vernon Schryver <vjs@sgi.com>. Thanks!
1996-08-10 01:08:06 +00:00
a9f27985cf
use the SunOS derived RB_STRING.
1996-08-10 00:20:58 +00:00
74693079c6
update for new reboot(2).
1996-08-09 10:32:11 +00:00
6fcba07ce4
Update.
1996-07-03 22:38:37 +00:00
648aed921f
RCS id police.
1996-07-03 03:28:09 +00:00
e6f7d4e4c5
Add '-m' to usage string; Fixes PR #2580
1996-06-30 22:30:32 +00:00
b449415724
On the sparc on an extra DIOCWDINFO after writing to the raw device.
1996-06-29 18:44:11 +00:00
458252ce61
Allow display and editing of partition size & offset fields in
...
<cyl/track/sector> format. This format is always excepted on input
(`-e' and `-R'); to display it use `-C'.
1996-06-29 15:50:18 +00:00
c047ffa9e6
Allow display and editing of partition size & offset fields in
...
<cyl/track/sector> format. This format is always accepted on input
(`-e' and `-R'); to display it use `-C'.
1996-06-29 15:50:16 +00:00
5e49244ee9
Add the manual page.
1996-06-27 11:07:55 +00:00
670604517a
Add boot_x68k.8 to the list of man pages to install; the distrib sets
...
expect it.
1996-06-26 05:22:58 +00:00
4982d25253
If kvm_dump_mkheader() returns 0, simply state 'no core dump' instead
...
of logging and error.
1996-06-23 20:30:39 +00:00
22abd6252f
x68k system bootstrapping procedures.
1996-06-15 18:54:22 +00:00
96dea9e6ca
Use a different tree-walking algorithm in propagate().
1996-06-11 07:07:52 +00:00
19ae2142e3
Discard setgid privelidges if not reading the running kernel, as suggested
...
in PR #2485 from Mike Grupenhoff <ashmir@umiacs.umd.edu>.
1996-06-06 23:34:39 +00:00
9be9a14c1a
update to reality. from mike long (pr#2517)
1996-06-06 15:23:47 +00:00
25e3d62e87
Don't allocate data structures for non-directories
...
Free any data structures when finishing a check (at the latest)
1996-05-28 19:51:11 +00:00
4c236e4e33
sparc uses edlabel also.
1996-05-28 01:54:32 +00:00
63e835ebd6
Some additions needed for the atari. Also use the getmaxpartitions() and
...
getrawpartition() functions from libutil.
1996-05-27 20:44:03 +00:00
83b266c3ab
Atari also uses edlabel.
1996-05-27 20:38:21 +00:00
a89a16b50d
Check return values of malloc
...
Generate full pathnames only on request
Minor cleanup, RCS Ids in .h files
1996-05-25 17:09:43 +00:00
5c78d726e4
File sizes in FFS are u_int64_t.
1996-05-25 09:57:36 +00:00
ea35d11c99
Be stricter when checking NQNFS and version combinations. Incorrect combinations
...
of these flags were previously possible when falling back from a v3 -> v2
mount, and could confuse the system.
1996-05-23 22:52:49 +00:00
8849e59abd
make some errors more verbose. inspired from pr#1509
1996-05-22 03:50:06 +00:00
4db6918d7d
fdesc file system does not allow files created in it. pr#941
1996-05-22 00:55:59 +00:00
28670f694a
Oops; use %x to print out masks, not %d.
1996-05-21 17:36:21 +00:00
e14f61b1f7
Check fs_[bf]mask, fs_maxfilesize, fs_maxsymlinklen, and fs_q[bf]mask,
...
since incorrect values may cause the kernel to malfunction.
1996-05-21 17:25:56 +00:00
6dc46f6326
Adjust the logic a bit so we `nif' can't overflow.
1996-05-21 16:58:12 +00:00
92a822c250
Remove previous (incorrect) change, and tidy up a bit to make it
...
clearer what's going on.
1996-05-21 15:32:16 +00:00
8c4136ca25
initalise dino to zero. pr#2098
1996-05-21 12:42:38 +00:00
c2a1985a50
Support attaching a STRIP line via the "-t strip" flag.
...
It has been suggested that a separate "stattach" command would be better.
1996-05-19 21:57:39 +00:00
71b374789d
Adjust the base for time estimates to ignore time we spent waiting
...
for operator input.
enhancements from PR #900
1996-05-18 16:16:17 +00:00
37b8aea219
Use getmaxpartitions() from libutil, not a homegrown version.
1996-05-16 07:13:01 +00:00
8a5bb3e806
Use getmaxpartitions() and getrawpartition() from libutil, not homegrown
...
versions.
1996-05-16 07:11:17 +00:00
e54ce8e1bd
Updated to use <util.h>.
...
From Greg Hudson <ghudson@MIT.EDU>.
1996-05-15 23:29:33 +00:00
6ae4c91a82
Add fsck utility for msdosfs
1996-05-14 17:39:21 +00:00
aa441df377
Add amiga to the list of ports using the new savecore.
1996-05-12 04:36:29 +00:00
5f98044780
Try looking up the file system name in fstab. From greywolf@starwolf.com,
...
slightly modified.
1996-05-11 14:27:50 +00:00
daa86d7011
Use kernel mount info rather than fstab. From greywolf@starwolf.com, slightly
...
modified.
1996-05-11 14:13:55 +00:00
153f55fdef
Add sun3 to the list of ports using the new savecore.
...
Add -lkvm when linking the new savecore.
1996-05-08 17:00:10 +00:00
4d54b9c567
check returns of inet_addr() and inet_network() against INADDR_NONE,
...
not -1, per the manual page. on 64-bit systems like the alpha, -1 will
never equal (unsigned long)INADDR_NONE.
1996-04-15 18:27:05 +00:00
c3877d120c
'const struct' not 'struct const'
1996-04-13 05:35:39 +00:00
6397db2ddd
Add const qualifier to mopts table
1996-04-13 01:30:59 +00:00
f502eb5e5d
Remove extra "the", from Masanobu Saitoh <msaitoh@spa.is.uec.ac.jp>,
...
PR #2318 .
1996-04-10 20:57:19 +00:00
c32e26146f
recent changes cause this to require <string.h> for proper prototyping.
...
Include it.
1996-04-09 05:20:30 +00:00
54e0c861ec
Add to DPADD for each library in LDADD; Reported by Mike Long <mike.long@analog.com> in PR #2301 .
1996-04-08 21:03:06 +00:00
9b70f26fe8
deal with the fact that fsck has moved
1996-04-05 04:17:54 +00:00
effa4b1417
this file has moved; not properly checked in in previous commit.
1996-04-05 01:48:29 +00:00
fea3644f0b
check in changes proposed in PR 2006 (approved by J.T.), to rename fsck
...
to fsck_ffs, so that in the future 'fsck' can be a wrapper than invokes
appropriate filesystem-specific checker programs. For now, the only
user-visible change is that the names have changed in the manual page
and in error messages; fsck and fsck.8 are now links to fsck_ffs and
fsck_ffs.8, until the rest of the transition is complete.
1996-04-05 01:44:24 +00:00
036d834ee8
Use an integer instead of a char for the getopt() return value in order
...
to work with compilers that use unsigned chars.
Compare the getopt() return value with -1 instead of EOF.
1996-03-30 22:34:25 +00:00
244a51db99
since the only difference between the old 'savecore' and the new one
...
is savecore.c, move it back into the 'savecore' dir (renamed as
savecore_old.c) so that the build is more 'normal,' and more like what
it used to be.
1996-03-30 06:48:58 +00:00
e5e3e0877a
add a SIGTERM handler to unmount the portal fs when killed. also put the
...
right PID in the mount table. from pr#893 <kstailey@leidecker.gsfc.nasa.gov>
1996-03-23 02:37:48 +00:00
cac62b2d65
Be pedantic, main() returns int in C.
1996-03-21 17:56:15 +00:00
08b137da1d
Omit kd_live argument to kvm_dump_mkheader().
1996-03-18 21:16:05 +00:00
e759e91739
Fix PR/2222: ttyflags hex flag printing in verbose mode reflected the
...
TIOCFLAG_ values not the TTY_ values. Fixed to print the flags as strings
to avoid confusion.
1996-03-17 19:28:21 +00:00
a10137a7e3
New libkvm/savecore implementation. With the following differences:
...
1) savecore will not access the dump or live-kernel directly. It
will always use the kvm-functions. Allowing it to work on kernels
that don't have a 1-1 PA-VA mapping.
2) the kvm-lib has some additional functions to accomplish 1
- kvm_dump_mkheader()
- kvm_dump_wrtheader()
- kvm_dump_inval()
3) the file formats of the dump generated by the kernel and the dump
generated by savecore have been changed. The file format now looks
like the format produced for 'normal' core dumps.
Ports not yet supporting the new kvm-format will be using libkvm.old/
savecore.old for the time being.
1996-03-16 10:29:36 +00:00
12ae78d8f0
old savecore - do not update
1996-03-16 10:25:11 +00:00
ef8a0d774c
Be more paranoid with our effective uid.
1996-03-15 22:39:26 +00:00
6f4ec6284f
Include the total number of sectors in the text representation of
...
the label; calculating based on the disk geometry is not always
accurate (notably, for SCSI disks). Also be a bit more careful
about printing out fixed-width types.
1996-03-14 19:49:24 +00:00
aca94000ae
Put the compression suffix *last*.
1996-03-08 08:52:12 +00:00
8a13b7646f
Make the manual page reflect reality, from Dave Carrel <carrel@cisco.com>,
...
PR #1699 .
1996-03-05 02:36:42 +00:00
ee8a2c002f
Copyright assigned to The NetBSD Foundation.
1996-02-28 01:01:17 +00:00
8bd51c47b9
Copyright assigned to the NetBSD Foundation
1996-02-27 22:28:09 +00:00
baef289adb
Sync with Lite2.
1996-02-20 16:06:55 +00:00
d6864c438f
Add #includes so this will compile.
1996-02-18 23:19:20 +00:00
e174025c48
Reorder #includes.
1996-02-18 23:18:56 +00:00
b1137d80f7
This accompanies getmntopts.c.
1996-02-18 23:12:23 +00:00
4b65d872bd
Temporarily use own getmntopts.c for mount_nfs (the Lite2 version). The other
...
mount_* commands need to be upgraded to use this version too soon.
1996-02-18 12:01:06 +00:00
f916611f33
Bring in NFSv3 code by Rick Macklem (from Lite2).
1996-02-18 11:58:24 +00:00
322cd1a032
Bring in NFSv3 code by Rick Macklem (from Lite2)
1996-02-18 11:57:50 +00:00
c88084b900
Grammar police, noted by Peter Seebach <seebs@solon.com>; closes PR #1704 .
1996-02-06 20:34:28 +00:00
e114a31b12
Note that fsdb arrived with NetBSD 1.1
1996-02-06 02:25:04 +00:00
aa6f27003a
support $TAPE.
1996-02-06 00:00:22 +00:00
2b5cf47051
support $TAPE. update manual to reflect reality ( #1937 ).
1996-02-05 23:59:37 +00:00
b2215e296f
Removed extraneous text; From Mike Long <mike.long@analog.com>
1996-02-05 06:33:47 +00:00
3651682dbf
Add /dev/rst* to FILES section. (pr 601) (Matches mt man page.)
1996-02-02 22:29:15 +00:00
9b1b61bd53
Change default tape name in documentation from /dev/rmt? to /dev/rmt8 to
...
match pathnames.h. (pr #601 )
1996-02-02 22:20:07 +00:00
732dd94a83
Add experimental data mirroring support, derived from code written by
...
Satoshi Asami and Nisha Talagala. For details on using data mirroring,
see the ccd(4) manual page.
1996-02-01 20:47:13 +00:00
66e4232d3d
#include <sys/ioccom.h> -> #include <sys/ioctl.h>
1996-01-30 18:34:07 +00:00
85d9dba24d
Add '-G' flag for mounting Atari-Gemdos filesystems.
1996-01-19 21:14:43 +00:00
afdfe1b51f
Use fs_csaddr to find the cg summary area. From der Mouse, PR 1366.
1996-01-18 21:55:27 +00:00
e66e318757
Check for .o extension after the *last* . in a file name.
...
Reported by Micheal Graff in PR #1868 .
1996-01-17 02:30:44 +00:00
94caee8dd7
PR487. From John Kohl. (more examples and some corrections)
1996-01-16 06:41:20 +00:00
6bad0cf2ef
Remove reference to mount_lofs(8), per Todd Williamson
...
<toddw@delorean.rb.isl.secom.co.jp> in PR #1783 .
1996-01-15 02:00:18 +00:00
7dd8344d86
Avoid arithmetic overflow (Tor Egge; PR#1768).
1996-01-09 21:23:36 +00:00
d6193ea4d4
Create v.2 hint files.
...
Note: don't bother to understand v.1 files..
1996-01-09 00:04:35 +00:00
d7fa0b22af
Produce less output on -q as promised by the man page (John Hawkinson; PR#998).
1996-01-07 00:07:23 +00:00
9a4742e3ce
Merge with lite-2.
1996-01-04 21:27:29 +00:00
5f0532320e
Agree with kernel on format of SIOCGIFCONF results.
1996-01-04 20:11:20 +00:00
8eedfc4a5d
The maxwait option was accidentally placed in the "options for
...
multicast pings" section of the description.
1995-12-31 04:55:35 +00:00
c0af535767
fdescfs now provides . and .. entries, so remove the comment about
...
them not being there.
1995-12-17 18:50:19 +00:00
9952e89162
Squish some type bugs pointed out by Jonathan Stone.
1995-12-17 06:03:36 +00:00
47efd9f35e
Make this compile with -Werror.
1995-12-14 22:30:45 +00:00
78bd4a1051
Make this compile with -Werror.
1995-12-14 22:17:26 +00:00
debbf2f60e
- Add support for Win'95 separate creation/modification/access timestamps
...
- Re-introduce lowercase filenames for non-Win'95-filesystems
1995-11-29 15:08:32 +00:00
0a1e7de7b6
merge in changes from 1.1 release branch
1995-11-28 05:25:28 +00:00
9cd0c2cad7
Recognize all mount flags exported from the kernel (but only print the
...
ones that we used to print). Note unrecognized flags(s) when printing
mount list.
1995-11-18 03:34:29 +00:00
15539710a0
Clear the mount argument list before filling it in. This is the patch
...
from Michael Hitch in pr#1722. As noted in the pr, this may not be the
most correct fix, but at least it prevents crashes.
1995-11-16 04:34:13 +00:00
dacabc2dd9
MOUNT_UFS -> MOUNT_FFS, and remove bogus comment.
1995-11-11 23:02:28 +00:00
0e43650d58
Fix handling of "-M core" and "-N system"; a real brain-o on my part.
...
Fix related typo in manual page.
1995-11-11 02:41:43 +00:00
a752cec2e0
Don't require compiling with -DDEBUG to enable debugging messages. Instead,
...
add a new option flag "-d", which enables debugging output. Compile all
of the code that used to be enabled with -DDEBUG unconditionally. The
amount of extra code is negligable, and all of the tests to check if
debugging is enabled were done regardless of -DDEBUG anyway. Adjust
SYSLOG() to DTRT if debugging is not enabled.
1995-11-06 07:00:07 +00:00
2bccd7cac4
don't define NUMBOOT on the alpha, any more. boot block installation
...
is now done by /usr/mdec/installboot.
1995-10-17 16:34:04 +00:00
a96f4bc2fc
Add support for Win'95 long filenames
1995-10-15 15:34:19 +00:00
a9d62322c7
Fix my typo
1995-10-10 21:42:00 +00:00
5c3d69cf2b
Build fsdb(8).
1995-10-09 02:24:30 +00:00
e727d216d2
A teensy bit of really minor cleanup.
1995-10-08 23:18:08 +00:00
3f7621c16a
FFS debugging/editing tool, from John Kohl.
1995-10-08 23:08:36 +00:00
ad5a72a23c
Add support for -DINET_ONLY to make this smaller in a ramdisk.
1995-10-08 23:03:54 +00:00
f8b730af38
On the sun3, add SUBDIR+= edlabe
1995-10-08 22:50:07 +00:00
013bc1008b
New, small disk label editor. Does not need ed(1).
1995-10-08 22:39:09 +00:00
e160549f5b
Kill sessions that were deleted when rereading /etc/ttys.
1995-10-05 06:11:24 +00:00
fd25fd5a19
Add a `-d' option to force a dump. From John Kohl.
1995-10-05 05:36:21 +00:00
9b746f76a4
Add code to look at the existing partition entries to deduce the
...
translated geometry of the disk. This code will only change the
disk geometry if it can find a geometry which is consistent with
all partition entries, so it's very conservative about choosing
a new disk geometry. Under some circumstances, it will choose a
number of cylinders which is a little lower than it needs to be,
but this code is enough so that you can create new partitions
with the correct physical addresses.
The right solution to this problem is to have the boot loader
communicate the BIOS geometry of each disk to the kernel, in a
manner similar to the symbol table, and then provide a kernel
interface to get at that information. I'm unfortunately not
really qualified to make such a change, and I want something
that works better than the status quo.
1995-10-04 23:11:19 +00:00
db3185152f
Fix typo (from Mark Weaver PR#1556);
1995-10-02 19:47:11 +00:00
0e91488536
Prevent loop in SIGCHLD handler (Frank van der Linden; PR#1539).
1995-09-30 11:39:53 +00:00
b12a0162d9
Fixed example. The "-o -b" flags aren't needed unless the arguments
...
(directory and uniondir) are swapped. (PR #1469 ).
1995-09-29 06:44:02 +00:00
a2784ea2fb
Changed to write the first 1k bytes that includes the disklabel and
...
the boot image information. For some reason, a lseek and write of
just the image information scrambled the disklabel. Since we have
a copy of the entire first 1k, just write it.
1995-09-28 07:08:49 +00:00
2a549b83f7
Fix the case where stat() fails, so that the file system is still unmounted.
1995-09-22 02:03:48 +00:00
c94617858b
Just use umask(0);
...
Use mktemp() for temporary file creation.
1995-08-25 11:35:35 +00:00
4edc2f666b
Ensure the hints file is readable.
1995-08-25 10:10:15 +00:00
32b3e66891
New way to calculate load address from Matthias Pfaller.
1995-08-25 05:11:36 +00:00
38634f3a18
Fix up a printf(), from Chris P. Ross.
1995-08-23 01:06:59 +00:00
1f3a168f04
Call mount_ffs instead of mount_ufs; PR #1379
1995-08-22 19:58:33 +00:00
aabb577203
add adosfs.
1995-08-19 16:08:05 +00:00
d014b18a86
Remove junk (from Masanobu Saitoh; PR#1378).
1995-08-18 15:01:19 +00:00
28aa17e348
Add missing commas (from Masanobu Saitoh; PR#1377).
1995-08-18 14:51:35 +00:00
3376de53d9
Build ccdconfig.
1995-08-17 16:38:53 +00:00
9a422ea24a
Configuration utility for the ccd.
1995-08-17 16:37:17 +00:00
f091151dc9
don't complain about errors opening 'on' ttys, if the error is ENXIO.
1995-08-13 05:24:03 +00:00
705e61651e
fix a couple of bugs pointed out by John Birrell, though fix some
...
differently he did. (1) don't assume that the timeval in
the packet is correctly aligned, (2) don't compare beyond the end
of the packet, (3) minor cast for printf happiness.
1995-08-11 22:37:58 +00:00
ea00559d41
Convert to use err(3)
1995-08-11 00:08:18 +00:00
7320c39038
makedev(8) -> MAKEDEV(8); PR #1306
1995-08-10 23:47:32 +00:00
9df0a9a560
Add boot_sun3.8
1995-08-08 20:46:20 +00:00
8920da128d
Parse library names better; takes care of PR#1291
1995-08-05 00:16:36 +00:00
34f94f0c70
Add and document options -w (to specify a maximum wait timeout, useful
...
for testing network interfaces) and -S (to specify a source address
on a machine with multiple interfaces).
1995-07-27 23:49:07 +00:00
83b019efaa
set dumpsize in dump_exists(), not save_core(), so that minfree check
...
works again. solves pr 1257, but sets dumpsize earlier than suggested
in that pr, so that dumpsize is set if a core doesn't appear to be
present (because dumpsize would be used if the '-f' flag is given).
1995-07-24 20:35:02 +00:00
a2465235f4
RIP address families are still 2 bytes
1995-07-24 13:03:25 +00:00
68b7908bf9
Fix bugs cgd pointed out.
1995-07-13 23:20:10 +00:00
3f230414c7
fix a stupid bug; wrong size was being used for sin_len.
1995-07-13 10:43:23 +00:00
7e0beb510f
clean up (GRAMMAR POLICE!), removed references to now-nonexistent
...
loopback file system (fixes pr 955, but more thoroughly).
1995-07-12 07:08:27 +00:00
3f9f3ddd4e
update docs to match the code.
1995-07-12 06:23:21 +00:00
f03626292f
fix a goof in my previous code, that i thought of while reading pr 749.
...
add a -A flag, which does the same thing as '-a', but doesn't check for
remounts.
1995-07-12 06:05:04 +00:00
a8592b0dd1
add mount_ffs(8). reorganize, to seperate the file system mount commands,
...
and to make it more clear what programs are dependent on a particular file
systems's format.
1995-07-12 03:50:27 +00:00
7fa5edba63
split FFS mount code out of mount(8). the correct way to name fast file
...
systems is now 'ffs', though 'ufs' is tolerated in fstab for backward
compatibility.
1995-07-12 03:46:47 +00:00
723ca902ed
remove FFS mounting code from mount(8); there are now _no_ 'internal' mount
...
types. when using mount(8) with '-a', do _NOT_ remount file systems
that have been mounted once already. (This cannot be 100% precisely
determined (thanks to mfs, union fs, and similar file systems which
don't use a 'real' mounted-from node), and changed options cannot be updated
with mount -a. however, options wouldn't be updated with the old mount -a
anyway, and this solves several annoyances.
1995-07-12 03:45:09 +00:00
e85da9ab29
recognize 'ffs' and 'ufs' as meaning the same thing.
1995-07-12 03:39:53 +00:00
5f6a15bcbe
implement a 'force check' flag, '-f'. I used the SunOS name, but the Digital
...
semantics. now:
(1) dirty file systems will always be checked; nothing new there.
(2) if not '-f' clean file systems will _NEVER_ be checked,
i.e. they won't be checked even if -p isn't specified. This
allows one to 'fsck -p ; fsck' to preen, then clean up
anything that 'fsck -p' barfs on, without waiting for the
clean file systems to be checked again.
(3) if '-f' clean file systems will ALWAYS be checked. This
allows people to put 'fsck -fp' into /etc/rc on systems
where they're leery of the FS clean flag state, need
the extra reliability, and can afford time 'wasted'
in checks.
The assumption made here is that if a file system is marked clean, it
_IS CLEAN_, really, and shouldn't be checked unless fsck is explicitly
told to (with -f). This should be a valid assumption, but may not be in
the presence of file system bugs. Documentation updated to note '-f'.
1995-07-12 01:49:16 +00:00
92174a19ea
Give an argument to the warning message for when realpath() fails.
1995-07-04 23:41:33 +00:00
49c06cb6c4
Reorder man page sources in makefile (alphabetize) and
...
add boot_mac68k.8.
1995-07-02 02:09:50 +00:00
d535998d4b
Use sysctl() to determine maxpartitions. Fixes pr #970 .
1995-06-28 02:21:02 +00:00
beabc1186a
Note the proper name for the core file instead of vmcore, and note the
...
names used when the -z option is present.
1995-06-27 22:40:46 +00:00
68ad3878b1
sys/signal.h -> signal.h
1995-06-26 23:26:23 +00:00
45bcb4b8c3
sys/errno.h -> errno.h
...
sys/signal.h -> signal.h
1995-06-26 23:17:26 +00:00
1ce78f01c4
fix verbose printf of dumplo, clean up printfs slightly
1995-06-25 06:28:13 +00:00
a8973a1752
specify precision, not minimum field width. pointed out by John Kohl
1995-06-22 11:15:14 +00:00
21258bad26
Allow exporting regular files.
1995-06-22 02:37:38 +00:00
d8f640e15a
Add a `merge' option.
...
Use err() & warn().
1995-06-20 23:12:33 +00:00
4841cf2927
- Support rip version 2.
...
- Add ansi prototypes.
- Be less internet centric.
- Convert queues to use <sys/queue.h> so we don't need -lcompat
1995-06-20 22:25:51 +00:00
54f83183c8
posixification of 'stat' structure
1995-06-19 21:30:36 +00:00
dd12858b36
stat structure POSIXification
1995-06-19 00:20:11 +00:00
93a2f4ea60
update for posixified stat structure
1995-06-18 21:35:33 +00:00
3d113b326b
don't assume f_fstypename is larger than MFSNAMELEN or is nul-terminated
1995-06-18 10:58:06 +00:00
5827156eb1
Back out previous change.
1995-06-11 05:28:52 +00:00
ae16273156
Back out previous change.
1995-06-11 05:16:04 +00:00
f477ccbfa7
Fix def_anon initializer.
1995-06-09 05:26:58 +00:00
061f2a0c7e
fd_set *'s really aren't compatible with timeval *'s
1995-06-08 12:38:07 +00:00
788733b7a9
typeof(timeval.tv_sec) != time_t
1995-06-07 17:14:21 +00:00
b5e03e8dd4
Fix debugging printf.
1995-06-06 19:54:30 +00:00
d6b0d0788c
Use setegid() explicitly, just to be safe.
1995-06-06 19:53:34 +00:00
7a4a8b6c81
Make sure the SIGHUP handler is actually set. Zero the fd_set before using
...
it.
1995-06-06 19:51:19 +00:00
27093b3eba
Fill in sin_len.
1995-06-03 23:23:52 +00:00
7f26bb202e
Set cr_gid properly, and adjust for getgrouplist() change.
1995-06-02 21:04:24 +00:00
06514eb892
Took away use of vax inline functions. Didn't work anyway.
1995-05-31 20:44:35 +00:00
f4d4fdf315
Make boot_pmax man page. (from jonathan)
1995-05-31 16:46:07 +00:00
53388641d7
Add missing option in example.
1995-05-30 09:09:39 +00:00
470a6be999
<sys/errno.h> -> <errno.h>
...
<sys/signal.h> -> <signal.h>
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:37:32 +00:00
9f28755bff
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:31:01 +00:00
628bd54eb0
this file should be dead.
1995-05-28 05:28:55 +00:00
4d2a8bbae7
<sys/syslog.h> -> <syslog.h>
1995-05-28 05:27:20 +00:00
ec38846844
sys_siglist[] -> strsignal()
1995-05-28 05:25:34 +00:00
afea82ff3c
<sys/errno.h> -> <errno.h>
1995-05-28 05:21:58 +00:00
2b3cba51fb
s/an active/a passive/
1995-05-24 15:55:02 +00:00
312851eab6
Format police.
1995-05-24 15:54:00 +00:00
1f1b61fc49
Fix bug in af_format where the formatted address was returned in the same
...
static buffer. When af_format is used more than once in the same printf
statement, the second call will overwrite the first. Changed af_format to
take a buffer and the buffer size where to place the formatted string.
1995-05-24 15:22:52 +00:00
9cd5391535
Use inet_aton(), not inet_addr().
1995-05-21 15:33:22 +00:00
b581b3e588
Use inet_aton(), not inet_addr().
1995-05-21 15:17:13 +00:00
10f79d3be3
Use inet_aton(), not inet_addr().
1995-05-21 14:22:23 +00:00
6d4cde278d
Use inet_aton(), not inet_addr().
1995-05-21 01:18:03 +00:00
7888507f63
Use inet_aton(), not inet_addr(). Suggested by John Hawkinson.
1995-05-19 20:17:16 +00:00
11b0070a5f
don't build netgroup(5) here.
1995-05-11 23:15:22 +00:00
be68575548
don't build netgroup(5) here.
1995-05-11 23:15:05 +00:00
2d709c7062
flush stdout instead of stderr, so that each block number is displayed
...
as it is printed. From PR 989.
1995-05-06 06:55:34 +00:00
c8338a3451
Remove xref to mount_lofs and add xref to mount_ados and mount_msdos.
1995-04-30 20:42:12 +00:00
f6f6145e7f
Make sure to reset signal mask on errors.
1995-04-29 22:42:07 +00:00
7b8bdc7ae5
pmax boot documentation
1995-04-25 23:55:11 +00:00
7d07096c42
Bits from old reboot_sparc.8 man page.
1995-04-25 11:37:25 +00:00
2fe1f93ac5
fix arguments to tracing functions and/or cast, to avoid warnings.
1995-04-24 13:24:30 +00:00
53f540575f
fix initializer
1995-04-24 13:23:52 +00:00
2d9ea442e5
fix array types to match what the file system wants.
1995-04-24 13:23:11 +00:00
c39f186d60
Changed to use only one bootblock file on VAX.
1995-04-23 19:27:59 +00:00
cc345dc38d
remove these (deprecated) files. port maintainers were warned about
...
their impending disappearance a while ago; they can still be retrieved
from the attic.
1995-04-23 10:58:38 +00:00
555d4b510e
slightly clean rcs ids, etc.
1995-04-23 10:33:03 +00:00
dfb2f56868
if no packets were received, exit with status 1. this should be
...
documented somewhere. As suggested by Rens Troost.
1995-04-22 15:27:08 +00:00
6f98502ae2
Interface-specific routes can be static.
1995-04-20 20:52:46 +00:00
22ecc6ab1a
Implement the document `-llinfo' flag.
1995-04-20 17:39:17 +00:00
5bc2528656
route.o, not route, depends on keywords.h. from jhawk@mit.edu; pr 978
1995-04-19 09:08:28 +00:00
f66d5868d5
Added vax for 2-file boot blocks.
1995-04-18 22:37:46 +00:00
5b613aff01
Remove extra `break;'.
1995-04-18 03:14:18 +00:00
5a76ea02ce
Set the `clean' flag.
1995-04-12 21:24:31 +00:00
7cb70c9889
Set the clean flag if necessary. If preening, don't check `clean' file
...
systems.
1995-04-12 21:24:07 +00:00
7bffa9e3f0
Print out the `clean' field.
1995-04-12 21:23:24 +00:00
ae0b9c2010
KERNEL -> _KERNEL
1995-03-28 17:18:59 +00:00
5745c084e8
Fix another bogus cast.
1995-03-27 22:14:47 +00:00
61b709b720
Remove incorrect cast on lseek() return value.
1995-03-27 21:48:52 +00:00
6bfd77e432
Fix typo in previous.
1995-03-23 00:01:03 +00:00
b1c02cd571
make sure that the alpha boot block is checksummed in a way more
...
acceptable to charles; #ifdef it, and do it explicitly here, rather
than doing a WDINFO ioctl for the -r case.
1995-03-22 23:48:49 +00:00
cdc420327d
Don't do a DIOCWDINFO after already writing the label.
1995-03-22 09:14:34 +00:00
be82a25869
Use POSIX signals.
1995-03-21 18:48:41 +00:00
6faa350c7d
Fix typo.
1995-03-21 14:05:36 +00:00
ffe9a4ccf0
Update to use timer{add,sub}().
1995-03-21 13:55:23 +00:00
38bab6b6da
type sizes
1995-03-21 01:30:09 +00:00
0cc5c1886a
short -> int16_t in a couple of places
1995-03-21 01:28:05 +00:00
283b35b06f
Make sure to recreate the `..' entry in the root directory if missing.
1995-03-20 00:40:10 +00:00
10df2990d8
re-order the DIOCWLABEL in the rflag case, so it actually works right.
1995-03-19 23:37:56 +00:00
d76c552602
halt(8) has been assimilated (into reboot(8)).
1995-03-18 16:15:28 +00:00
ce5ebe9911
pseudo-merge with Lite; man pages need to be merged seperately, but
...
that's really a port-specific thing. They probably should be updated, too.
1995-03-18 16:11:33 +00:00
369451e46b
from Lite
1995-03-18 15:17:32 +00:00
0114e805ce
convert to new RCS Id conventions; reduce my headache
1995-03-18 14:54:19 +00:00
d715871567
new id tag convention, typo.
1995-03-18 12:28:06 +00:00
909eb54fbb
calculate the 'offset' argument to lseek() in a prettier way, more
...
consistent with the way fsck(8) does it. no functional change.
1995-03-18 07:02:29 +00:00
671d2abce5
complete remove special search dirs, use NetBSD Id tag.
1995-03-06 04:24:41 +00:00
f9b9202a22
flush stdout after printing each alternate superblock location.
1995-03-04 06:28:20 +00:00
4c02b41140
fix up inconsisten uses of lseek(). (three uses. one hard-coded 'whence'
...
as a number, one used an L_ constant and the other used a SEEK_ constant!)
1995-03-04 06:10:39 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
1e81015d0c
Document the getopt(3) option syntax, and some other documentation cleanup.
1995-02-21 01:17:40 +00:00
4cdfbdb0e8
Fix an old formatting glitch.
1995-02-21 00:27:29 +00:00
dd6c22ed70
Use getopt(3), with obsolete() from restore(8) for backward compatibility.
1995-02-20 22:35:56 +00:00
d8b173be70
Use atexit() rather than tweaking every exit() to call the cleanup function.
1995-02-20 19:43:51 +00:00
f7078d4f16
Fix core dumps on certain types of invalid options.
1995-02-20 18:42:14 +00:00
a3141c6a40
fstab man page is in section 5, as pointed out by David K Brownlee in bug 802.
1995-02-16 19:48:19 +00:00
532a938c1d
NUMBOOT == 2 on the alpha, too.
1995-02-11 02:42:21 +00:00
9235328d5a
functions which are 'fake-varaargs' should be passed longs, not ints.
1995-02-10 23:26:14 +00:00
cbdbe9a97a
do the DIOCWDINFO in writelabel() even if -r is specified.
...
On most machines it's redundant, but it gives others the chance to
take special actions, e.g. updating a checksum.
1995-02-10 23:24:19 +00:00
mycroft