Commit Graph

31 Commits

Author SHA1 Message Date
wrstuden 8a4ca40c65 Enable pps support, only if CLOCAL set & MDMBUF clear and no clock present. 1999-03-27 01:17:03 +00:00
wrstuden a7678930b4 Oops. mac68k does NOT use PCLK as a clock source, so don't enable it in
the default channel setup.
1999-03-23 17:55:03 +00:00
mycroft 2a304686e6 Minor cleanup.
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
1999-02-11 15:28:03 +00:00
mycroft be1af660c0 Don't set DCD_IE in the frontends. KGDB doesn't even use DCD, and the tty
frontends get it from zsparam() anyway.
1999-02-03 20:25:05 +00:00
scottr 5cb5f44921 Defopt ALTXBUTTONS, DISABLE_EXT_CACHE, and ZS_CONSOLE_ABORT. 1998-10-22 04:36:50 +00:00
scottr 9d1c9d8d38 Use correct devices for zs driver on AVs. From Dave Huang (PR 6107). 1998-09-10 21:40:42 +00:00
scottr 3e40b6ff15 A simple, obvious optimization, now that the loop has been
removed from zshard().  Pointed out by Bill Studenmund.
1998-08-12 06:55:24 +00:00
scottr 7d09ad09b4 New framework for handling processor interrupts, derived in part from
the hp300 port.

 - Interrupts 3-6 use this immediately.  Interrupt 7 is a special case,
   and the VIA interrupts (1 and 2) will be addressed when that code is
   rototilled.

 - Modify the zs front end to register with the appropriate interrupt
   controller:  through the PSC on the AV Quadras, and direct to
   interrupt 4 on the rest.  Arrange to have the appropriate zsc_softc
   supplied to us at interrupt time.

 - Modify the direct ADB driver (and its PowerManager cousin) to call
   intr_dispatch(), rather than zshard().  XXX This is a kludge, but at
   least limits the brokenness to the ADB drivers, now.

As a side effect, this should fix PR 5590.  Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 05:42:44 +00:00
jonathan 466e784ee1 defopt DDB. 1998-07-04 22:18:13 +00:00
wrstuden 29f991cc2f Fixup last revision to zs.c. Keep a lot of the comment cleanup, and
keep the explicit clearing of interupts in zscnprobe.
1998-07-02 17:32:03 +00:00
wrstuden 67b0c87dc3 Overkill patches to make serial console work again. Should also make
serial echo work, but not sure. Tested by Paul Goyette.

A few of these changes can probably be backed out, but I'm not sure which.
This part should work for now, and get things going again. These fixes
should also get rid of the problem of things crashing just as zstty0 gets
configured.
1998-06-30 18:13:21 +00:00
scottr 22b90adcc2 Add the remaining kgdb pieces from sun3/hp300, with some mac68k-specific
adjustments to initialization.
1998-05-05 06:48:51 +00:00
thorpej 36760d9d94 Update for changes to config. 1998-01-12 18:59:04 +00:00
wrstuden 5a67b7c680 Add initialization code for cs_wr5_dtr as the M.I. layer now tests
it in initializing during autoconfig. Similar to sys/arch/sun3/dev/zs.c
revision 1.47. Ought to fix hangs at first tty access reported by
Johnny Lam, <jlbg+@andrew.cmu.edu>.
1997-12-16 17:53:12 +00:00
scottr ee70fa750a Shades of rev 1.13: Really, we shouldn't call Debugger() if we
haven't got ddb in the kernel.  Fixes PR 4632.
1997-12-06 19:41:46 +00:00
mycroft ec5fd4954e Set rr0_dcd.
Don't set DCD_IE and CTS_IE here; let the MI code do it.
Handle MDMBUF.
1997-11-02 08:05:06 +00:00
scottr 8630149cba Convert to MI 8530 SCC driver, from Bill Studenmund. The new front end
also supports DTR/CTS flow control.
1997-10-20 08:13:26 +00:00
scottr c988c6f85f Make #include directives consistent. All MD headers are of the form:
#include <mac68k/{dev,mac68k}/foo.h>
1997-08-11 22:53:26 +00:00
scottr db9068c773 Don't call Debugger() if we don't have ddb. Fixes PR 3744. 1997-06-15 20:34:15 +00:00
scottr affc68cf0c Work around another bogus uninitialized warning, and fix a legitimate one.
Clearly mark the former.

XXX The bogus warnings show up with -O, but not -O2.  Unfortunately,
    NetBSD/mac68k can't (yet) use -O2.
1996-12-18 05:04:22 +00:00
scottr 9b4055eb72 Convert all foo_match() functions to use a `struct cfdata *' for their
second argument.  The NuBus autoconfig code had to be reorganized as a
result of this, and looks much more like a directly-attached bus now.
These changes eliminate __BROKEN_INDIRECT_CONFIG.
1996-12-16 16:17:02 +00:00
christos 40ecbf8e72 backout previous kprintf change 1996-10-13 03:21:13 +00:00
christos 06555645c2 printf -> kprintf, sprintf -> ksprintf 1996-10-11 00:24:36 +00:00
scottr 3cf197cef1 Somehow the last change got mangled. Do over. 1996-09-16 05:24:21 +00:00
scottr debc473329 - Add a ZS_CONSOLE_ABORT option to enable a serial console break to
force a drop to the system debugger.  WARNING:  this used to be the
  default behavior!  Modify custom kernel configs accordingly.
- Check for ZS_HWFLAG_CONABRT in zs_abort(), and don't abort if it's
  not set.
1996-09-16 04:32:28 +00:00
cgd 2a73ef60b7 change cfprint_t type definition to take a const char *, rather than
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
briggs 9697ef6407 Add machine/viareg for prototype of via_set_modem(). 1996-06-09 04:27:59 +00:00
briggs 00c097a027 Changes from Bill Studenmund to support external clocks on the modem port. 1996-06-07 10:41:30 +00:00
briggs 79309c78d8 Patches from Bill Studenmund to get serial default settings from the booter. 1996-06-07 00:15:24 +00:00
briggs 78560abd91 Change the console banner message. 1996-05-23 05:18:48 +00:00
briggs 2635a9c602 Serial driver with interface to a slightly modified version of the machine-
independent z8530 driver.  When that driver is updated, the local copy
of those files may be removed.  From Bill Studenmund.
Compiler warnings fixed by me.
1996-05-18 18:53:50 +00:00