63604adafa
Add a bunch of Gig-E definitions.
2001-04-30 19:21:03 +00:00
19b0c05827
Ops, don't forget to increment li->used for each tagged command.
2001-04-30 13:58:32 +00:00
2cc0fbbe14
remplace /*
...
*/
with
#ifdef notdef
#endif
to avoid:
../../../../dev/ic/hmereg.h:275: warning: `/*' within comment
2001-04-30 12:22:42 +00:00
26b0905dd0
Machine independent GPIO interface.
2001-04-30 11:42:17 +00:00
4ca3c858b6
Copy of sys/arch/hpcmips/vr/button_vrgiu.c.
2001-04-30 10:10:18 +00:00
c732b45553
Copy of sys/arch/hpcmips/vr/pwctl_vrgiu.c.
2001-04-30 10:09:14 +00:00
1a5e77115a
Place holder until real fwscsi code is fleshed out.
2001-04-30 09:06:27 +00:00
dfc69462fd
First pass at the overall TODO list. Some of these may come off before I get the full code checked in even
2001-04-30 09:05:40 +00:00
98182717b8
Rework implementation notes/ideas with a more fleshed out example.
2001-04-30 09:02:38 +00:00
00085e9fc8
Add MI osiop.
2001-04-30 04:53:41 +00:00
0ceded7d3b
Generated from osiop.ss rev. 1.1:
...
Initial compiled script for 53c710.
2001-04-30 04:49:57 +00:00
613923b42e
Add a MI driver for the Symbios/NCR 53c710 SCSI controller.
...
This is based on amiga's siop driver, but converted to use
bus_space(9) functions and modified to fit bus_dma(9) framework.
Currently tested on NetBSD/arc with jazzio 53c710 SCSI,
which really requires bus_dma(9) functions :-)
Sync transfers and disconnect/reconnect are also working.
TODO:
- Test under more heavy load
- Clean up osiop_checkintr() hander
- Reorganize command queue and sync negotiation handling more suitable
for thorpej-scsipi mid-layer
- Re-think defered interrupt handling for amiga
2001-04-30 04:47:50 +00:00
b3b4a527b3
remove trigraph
2001-04-30 03:53:19 +00:00
5de219fbef
delint
2001-04-30 03:49:12 +00:00
c83fa97ec8
remove trigraph
2001-04-30 03:48:06 +00:00
52a1d62934
delint
2001-04-30 03:45:35 +00:00
786063e4da
use #if 0 rather than // or /* to comment out blocks of code
2001-04-30 03:43:09 +00:00
f863105161
remove some lint, including ansifying funcs
2001-04-30 02:55:08 +00:00
36d8e99d14
Cast args correctly to match format strings.
2001-04-30 02:49:04 +00:00
5a6772df26
Cast base correctly for format string.
2001-04-30 02:46:20 +00:00
9d02aae3a9
minor lint
2001-04-30 02:44:53 +00:00
85772a1cef
remove some lint
2001-04-30 02:34:58 +00:00
abf1970c82
delint newline in string
2001-04-30 02:17:55 +00:00
599ac910c6
this is _C_ not _C++_, and // is NOT valid in _C_
2001-04-30 01:34:04 +00:00
d2ac513298
remove some lint
2001-04-30 01:19:40 +00:00
afdcbf7e55
Correct formatting. Put the port and the ethernet address in their own
...
line.
XXX: it is stupid that pcmcia_io_map() prints " port 0xNNN[-0xMMM]". This
makes the printing code confusing.
2001-04-29 20:12:01 +00:00
3ae161c702
don't put a trailing comma in pcmcia_devinfo. All the drivers use
...
printf("%s\n", devinfo) and it looks stupid.
2001-04-29 20:10:24 +00:00
c3736bf111
Use ubmemalloc() for data structures. Remove unused vars. KNF.
2001-04-29 12:32:18 +00:00
b83fe1a852
Correct register address map for 53c710.
2001-04-29 11:20:44 +00:00
a2d52d0ed4
Add #define for 1394 ROM signature
2001-04-29 08:37:04 +00:00
acc17cc823
Set the delta for the particular source so telling mixerctl to decrease the
...
volume (using --) adjusts it far enough to stick.
2001-04-29 02:47:25 +00:00
1346d56311
- don't wait when called from interrupt context (basically this means we
...
can't sleep in HBA drivers)
- pool_get can fail, so return XS_RESOURCE_SHORTAGE instead of panic()
- don't try to bzero() a NULL pointer
2001-04-28 15:09:42 +00:00
e67bc465a2
Make it compile with DEBUG after SCSI changes.
2001-04-28 14:48:39 +00:00
862125c057
Don't forget to set XS_CTL_DATA_OUT (that was removed in previous).
2001-04-28 09:33:25 +00:00
335ac52a5b
Use simple tags for read and write, unless B_ORDERED is set, in
...
which case we use an ordered tag.
2001-04-28 04:11:31 +00:00
74b15b27a2
Don't forget to call psw_done() !
2001-04-27 21:36:58 +00:00
2758818d81
regen - SKNET cards
2001-04-27 18:04:14 +00:00
3367b801f2
Add driver for SKNET Personal and MC+ - AMD Lance 7990 based ethernet cards.
...
Both models tested and seem to be quite stable and fast.
Thanks to:
- Hans Hubner <hans@Huebner.org> for giving me the cards for testing
- Georg Klug of Syskonnect, who provided me with hw docs for these cards,
very promptly and willingly - I wish all vendors would be like this
- Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect
contact :)
2001-04-27 18:03:40 +00:00
b28d00fa02
Introduce mca_match_disabled() - this returns true if cards with particular
...
id should be handled even through it's marked as disabled in POS registers.
There are some cards which need this due to nonstandard hw design.
2001-04-27 17:52:51 +00:00
d66e548d92
Introduce mca_match_disabled() - this returns true if cards with particular
...
id should be handled even through it's marked as disabled in POS registers.
There are some cards which need this due to nonstandard hw design.
2001-04-27 17:11:45 +00:00
6589e65051
Don't panic if the memory size is "weird", but instead compute
...
reasonable transmit/receive buffer count.
This is needed for e.g. SKNET adapters, which use top 30 bytes of 16KB
memory to map registers and PROM and hence not all the memory is
available for buffers.
2001-04-27 17:08:02 +00:00
af5fd4c7d8
Stopgap measure for PR kern/12762: cut the number of openings per device
...
to 16 or 4 (depending on capabilities of adapter), as it was before
thorpej_scsipi integration
Waiting feedback to known whenever the problem with openings set to AHC_SCB_MAX
existed before.
2001-04-27 14:49:11 +00:00
55ffdd0e46
make this compile with the new scsi framework
2001-04-27 08:06:33 +00:00
a7d2fe8275
Use uballoc()/ubmemalloc() for data structure allocation.
2001-04-26 20:05:46 +00:00
6bfb730eba
Use ubmemalloc() to get mapped uba memory.
...
Only copy mbufs if there are more than two in a mbuf chain (on transmit).
This squeezed another 5% out of the DEUNA. (now closing up to 100 K/s :-)
2001-04-26 19:36:07 +00:00
014984b747
Add functions to allocate mapped-in qbus memory.
2001-04-26 19:16:07 +00:00
596cc0bc10
Cast the config block buffer to (u_int8_t *) when reading it
...
from ISA memory space.
2001-04-26 17:58:28 +00:00
e5422a382f
Explictly include <machine/pio.h> (since this driver uses
...
i386 pio instructions -- XXX BROKEN).
2001-04-26 17:57:47 +00:00
856411129e
Disable tagged queuing for now, it causes commands timeouts.
...
Note that it's not worse since thorpej_scsipi integration: tagged queuing
was not used before, because of a tag message rejected at probe time.
2001-04-26 17:09:39 +00:00
d032d80637
Redo xfer sync/wide/tag notification again: we need to notify upper layer
...
that we can do tag.
Start sync/wide nego at first command, but wait ADAPTER_REQ_SET_XFER_MODE
to notify upper level.
2001-04-26 16:56:53 +00:00
03941a12da
- Fix typo in comment.
2001-04-26 08:23:22 +00:00
0d6646292e
- Fix typo in comment.
...
- Add (missed)powerhook_disestablish() in ex_detach().
- Sync with below. Original commit log message:
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2001-04-26 08:21:51 +00:00
360780f37e
s/\<PROTO_ATAPI/C&/
2001-04-26 03:59:32 +00:00
38ba8564f5
Add esm.
2001-04-25 18:32:10 +00:00
937a7a3ed9
Pull up the thorpej_scsipi branch to main branch.
...
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 17:53:04 +00:00
94e69e110f
Initialise all function's latency timer and cacheline size.
2001-04-25 09:29:36 +00:00
3d8f9a4f4f
Set function-in-use flag before calling power control function in
...
order to prevent turn on power twice. This change does not prevent
power-off/power-on conflicts.
2001-04-25 09:20:32 +00:00
4d24d9a940
Regen.
2001-04-25 03:07:19 +00:00
3e4456d049
Spell "portege" correctly - it's a computer, not a car.
2001-04-25 03:06:11 +00:00
6f6fe2f3ad
Spell occurred correctly.
2001-04-25 02:33:08 +00:00
ad44e79f90
It appears there's a race condition when disabling a channel that causes us to
...
need to explicitly relatch the interrupt when firing it up again. So, in the
trigger routines, explicitly disable and reenable the interrupt to relatch it,
like we do in the interrupt routine.
Also clean up some broken loop overrun checks.
My ES1371 seems to be more reliable now, but I'm not going to pretend to fully
understand this chip.
2001-04-24 21:03:33 +00:00
115f4e4207
print the drq together with irq, slot info
2001-04-24 09:15:06 +00:00
09062a99f9
one less
2001-04-23 09:36:01 +00:00
1fe3261554
Add constant for SKNET Ethernet Card
2001-04-23 06:10:09 +00:00
15224351ef
Compact autoconf info by printing the IRQ number together
...
with 'at mca0 slot foo' info.
2001-04-23 06:10:08 +00:00
a0c30da432
Add comment set spec id to macro types
2001-04-23 00:57:32 +00:00
7c87238caa
Add Model id as a valid generic type
2001-04-23 00:57:05 +00:00
3d1c1edbc5
g/c edc_dev_status[]
2001-04-22 20:02:38 +00:00
d0a98e1d18
fix edc_dump_status_block() to correctly print Command Error Code and
...
Device Error Code/Status when appropriate
add one item to TODO - need support for kernel memory crash dumps (to be
implemented "soon")
2001-04-22 20:00:59 +00:00
27253eea15
Use uvm_pageboot_alloc() rather than pmap_steal_memory().
2001-04-22 16:44:41 +00:00
9aba6e0cc4
Add arcpp.
2001-04-22 15:03:22 +00:00
85f0e37b44
edc_dump_status_block(): print RBA # and block count as unsigned
2001-04-22 13:00:24 +00:00
912e570671
Introduce machdep mca_disk_[un]busy(), which turn on/off disk LED.
...
Call as appropriate from the ESDI disk driver
2001-04-22 11:52:18 +00:00
8927d6f1be
Fix serious bug in bounce buf handling - the EDF_BOUNCEBUF flag needs
...
to be cleared always in edmcadone(), otherwise if there is a write
via bounce buffer followed by read directly to buf, the read operation
would return trashed data (the buf data would get overwritten
by contents of bounce buffer in edmcadone()).
Reset b_resid as necessary when the i/o is done, too.
g/c some unneeded stuff, use lockmgr()-style locking in ed_[un]lock(),
better avoid some deadlocks
These changes make the driver quite a bit more stable. It's actually
reliable enough to be possible to newfs the drive and use it for
read/write filesystem now.
2001-04-22 11:32:49 +00:00
68ec0583b4
Add latches (arm26).
2001-04-22 00:27:18 +00:00
e53804bd4b
Preliminary support for Acard ATP850/860 UDMA PCI IDE controllers.
...
XXX Currently disabled by default because it has some problems on macppc.
XXX Maybe some more initialization is needed, but there is few information
XXX about the chips.
2001-04-21 16:36:37 +00:00
8dfe3efca7
space -> tab
2001-04-21 16:10:54 +00:00
e815501ea9
Regen from pcidevs rev. 1.318:
...
> Correct an entry for Acard UDMA IDE controller.
> The chip is actually marked as ATP860-A, not ATP860R.
2001-04-21 13:32:25 +00:00
42f78f411a
Correct an entry for Acard UDMA IDE controller.
...
The chip is actually marked as ATP860-A, not ATP860R.
2001-04-21 13:28:52 +00:00
f39a68828d
Make sure to check SC_ACCEL_TAGS in ncr53c9x_ioctl()
...
even if sync transfer is disabled or not supported.
2001-04-21 07:28:22 +00:00
64eed5859d
Clean up ncr53c9x_select():
...
- Define NCR_F_SELATN3 for sc_features and use it to check if the chip
supports SELATN3 command
- Make conditions of sending messages a bit simpler.
2001-04-21 05:35:20 +00:00
f2e3f6d5d4
Cosmetics. (tab/space etc.)
2001-04-20 17:32:33 +00:00
31d512c2e3
Added support for the chipset used on the Sun2 "sc" SCSI adapters.
...
A little rough around the edges, but definitely a starting point.
2001-04-20 16:35:22 +00:00
1351706593
Fix a few race conditions ... the VSYNC update flag could be cleared
...
resulting in a blank screen when f.e. a setcursor ioctl was called
after the screenblanker had enabled the screen again ... the actual
switching on was then never performed at VSYNC.
A simple |= instead of = does the trick ... just leave the other bits
on please :)
2001-04-20 11:53:06 +00:00
4d5eec3337
regen
2001-04-20 11:19:51 +00:00
a20a13451f
Add support for IBM Multi-Protocol Communications Adapter. Card provided
...
by Hans Hubner <hans@huebner.org>.
We only support the card in "serial" mode. BISYNC nor SDLC modes are
not supported.
2001-04-20 11:19:27 +00:00
1df81c3607
regen
2001-04-20 10:05:16 +00:00
b973e27bba
Add support for NeoTecH Single RS-232 Async. Adapter, SM110. Tested
...
with card provided by Hans Hubner <hans@huebner.org>.
Also pretty the autoconf attach messages a little.
2001-04-20 10:03:35 +00:00
640bbf7e9f
regen
2001-04-20 07:38:11 +00:00
a98cbd0740
Add MCA ne(4) attachment for Novell NE/2 Ethernet adapter and clones.
...
Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>.
The Compex and Arco cards were not tested. According to Linux ne2 driver,
they should work same way as NE/2.
2001-04-20 07:37:42 +00:00
3ec26e703f
regen
2001-04-20 07:10:40 +00:00
6daeb5ba7b
add two Novell NE/2 compatible products
2001-04-20 07:10:12 +00:00
6939f3af70
regen
2001-04-19 18:38:50 +00:00
1420958f33
Add couple cards I got from Hans Hubner <hans@Huebner.ORG>
2001-04-19 18:38:23 +00:00
5452e8a704
dasd --> edc
2001-04-19 17:42:49 +00:00
dbf91c827d
Use "edc" instead of "dasd". As pointed out by Soren, dasd doesn't
...
mean anything special in IBM-talk. And edc better matches prior art, too.
2001-04-19 17:17:28 +00:00
e4cc721094
Correct the opcode for SCSI_MODE_SENSE_BIG.
2001-04-19 10:16:25 +00:00
2355b2e1e7
add dasd and ed at dasd?
2001-04-19 07:47:50 +00:00
361e520ce0
one less - ESDI support is written (albeit the driver needs to be tested more)
...
add some additional comments
2001-04-19 07:33:00 +00:00
24729c94cf
regen
2001-04-19 07:31:17 +00:00
fd1d702ab7
Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed
...
Disk & Controller only at the moment.
This driver still needs some touchup (error recovery is not quite
good, MCA DMA controller goo should be moved to driver independant
location), but is working enough to be usable for others. And I
want this under CVS control :)
Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for
these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
2001-04-19 07:30:24 +00:00
af2e19db8f
Remove stuff I didn't mean to commit yet.
2001-04-19 00:50:22 +00:00
72a04bd497
Add HP 3400.
2001-04-19 00:47:49 +00:00
fc1271af53
Regen.
2001-04-19 00:47:30 +00:00
3d2488184c
Add a Lexar CF reader. (From FreeBSD)
2001-04-19 00:47:12 +00:00
4747025b48
ctype-like functions are now in libkern.
2001-04-18 15:40:58 +00:00
caf5e03906
Add Mobile Pro 780 own keymap. This resolves the arrow key problem on
...
Mobile Pro 780.
2001-04-18 14:01:06 +00:00
7f8c2c6de2
fix typo in comment - s/splio()/splbio()/
2001-04-18 05:40:03 +00:00
109656b0a7
rewrite suspend/resume routine. If you suspend while playing audio,
...
clcs and clct continue playing when resume.
2001-04-18 01:35:06 +00:00
6fe345e833
"asc" doesn't exist on arm26 any more.
2001-04-17 23:51:07 +00:00
a7a9126e0e
Regen.
2001-04-17 14:30:01 +00:00
6a59be7d6b
Add Bt760 Ethernet.
2001-04-17 14:29:47 +00:00
23f20b8af6
Update DEVNAMES for the new wscons devices for arm32 wich i had forgotten.
2001-04-17 10:33:21 +00:00
6497b0a623
Regen.
2001-04-17 08:38:23 +00:00
7dfc3d8076
Add a Xirlink camera. From PR 11570.
2001-04-17 08:38:01 +00:00
264c404593
Clean up formatting a little.
...
Split protocol variable into wire and command protocols.
2001-04-17 00:50:13 +00:00
f14db62d03
Add a DIAGNOSTIC.
2001-04-17 00:05:33 +00:00
d71d51409d
"acemidi" podulebus device.
2001-04-16 20:14:04 +00:00
14dceb11ef
Regen.
2001-04-16 10:42:39 +00:00
6f4ae4bff8
Add lots of storage devices.
2001-04-16 10:42:19 +00:00
22a18cbcb3
Add macro for extracting the whole key as one byte value.
2001-04-16 01:09:31 +00:00
bafbeaf802
Use the bi-directional protocol if the printer supports it.
...
This is the way that e.g. HP recommends (but then some of their printers
have a bug that makes the input pipe useless anyway).
Also try reset both the 1.0 and 1.1 ways.
2001-04-16 00:18:06 +00:00
b1b0b4bc9a
Regen.
2001-04-15 22:33:37 +00:00
9c6b6d7b02
Add more HP devices.
2001-04-15 22:33:23 +00:00
849d818db4
Remove some unused variables.
2001-04-15 15:01:35 +00:00
b86cb140c5
Use a better symbolic name.
2001-04-15 10:26:36 +00:00
595f18daf9
Add quirk for printers that cannot handle bidir mode (not used yet).
2001-04-15 09:38:01 +00:00
d828968798
Regen.
2001-04-15 09:28:31 +00:00
3865f3dfc7
Add a bunch of HP printers.
2001-04-15 09:28:12 +00:00
d62038a18e
Add Aztech sound card found in HP Kayaks.
2001-04-15 03:31:37 +00:00
69337b1dd0
Correct some typos. Add 2 more macro's to extract data from directory entries. Add $
2001-04-15 00:21:38 +00:00
6c7d3e3521
Add rudimentary support for the ACE Midi-Connect card which abs gave me.
...
Currently it appears as a "com" port, which is less than useful, and
occasionally generates stray interrupts. "stty -f /dev/tty00 31250 raw"
does enable it to talk to a nearby MIDI device, though.
2001-04-14 20:39:23 +00:00
7e0b361d84
Fix for kernel alignment crash reported on port-alpha. A developer went on
...
a happy code sweep (in the kernel!) and constified a random selection of
kernel objects. This changed the alignment of the previously-aligned-by-
accident seqprog array, and exposed a lurking bug. I can't decide if this
is good or bad.
2001-04-14 19:37:17 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
c18a98953b
Regen for moved Trident CyberBlade entry
2001-04-13 19:01:28 +00:00
1384b9cebc
Move the Trident CyberClade entry where it belongs.
2001-04-13 19:00:31 +00:00
b5c707b2b6
Make it link with debug flag.
2001-04-13 12:51:43 +00:00
939159f6d0
Make it compile with debug.
2001-04-13 12:42:40 +00:00
bcdfccea3c
Split the umass driver into the part that handles the X-over-USB protocol
...
(umass.c) and the part that handles scsibus/atapibus (umassbus.c).
This way the must port specific stuff can be removed from umass.c.
2001-04-13 12:24:10 +00:00
38c02444d9
Finally get rid of the UGLY and EVIL hack for avoiding tsleep().
2001-04-13 11:19:58 +00:00
cbcea5e84c
Do mii frobbing in process context.
...
Now we can finally get rid of the evil USBD_NO_TSLEEP hack in the aue driver.
2001-04-13 11:17:11 +00:00
b728f196e9
Comment out some flag stuff that isn't used. Someone should take a look
...
at this. There is something fishy with the mii code, the last argument to
mii_attach() is not being used in any meaningful way.
2001-04-13 11:14:55 +00:00
205b10ed17
Add a flag to mii_flags which will cause autonegotiation to use tsleep()
...
instead of callout. This way adapters which need a process context for
PHY register access (e.g. USB adapters) have a chance.
2001-04-13 11:12:36 +00:00
c5a768d097
Add support for ADMtek AN985.
2001-04-13 00:18:11 +00:00
ed7afd2ad6
Regen.
2001-04-12 23:56:13 +00:00
23b1e2c46e
Some new device (from FreeBSD).
2001-04-12 23:55:58 +00:00
9071f4edbb
Make sure all tasks are remove on detach.
2001-04-12 23:54:56 +00:00
f13ec50e47
Clean up bus dma code for request/response queues.
2001-04-12 21:40:56 +00:00
c5a6653add
Use IPL_NET for now -- the only use of 1394 right now is for network
...
interfaces (IPv{4,6}-over-1394), and this allows us to get rid of
some evil interrupt mixing issues in the 1394 network code right now.
2001-04-12 21:39:31 +00:00
67e357f0a9
splimp -> splvm.
...
This, like all other uses of spl*() in VAX code, needs to be
scrutinized.
2001-04-12 20:38:25 +00:00
thorpej