Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
60,015 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

34840 Commits

Author SHA1 Message Date
thorpej 701cc4b663 Add support for the Xircom X3201-3 in 21143 emulation mode. This chip 
appears on some Xircom and Intel RealPort(tm) cards.

From Rafal Boni, with some slight modifications from me.
 2000-01-25 21:50:30 +00:00
drochner e81d123f6d try to dtrt for sector sizes <DEV_BSIZE (at least, don't divide by 0) 2000-01-25 20:42:33 +00:00
thorpej 6dc0e3435d IFM_1000_FX -> IFM_1000_SX 2000-01-25 20:19:14 +00:00
thorpej 52ee0b9f98 IFM_1000_FX -> IFM_1000_SX, like it's supposed to be, and add a few 
more gigabit Ethernet tyes from FreeBSD.
 2000-01-25 20:18:52 +00:00
thorpej 02af3f45b6 Clean up the SROM addrbits code a little. 2000-01-25 19:53:34 +00:00
chopps da499b1e3a make the wait_ready loop use pcic_delay() (thus tsleep) too for cards 
that take a while to become ready
 2000-01-25 19:38:18 +00:00
thorpej 6aca67041c Add a chip type for the Xircom X3201-3, and centralize the declaration 
of the chip names array.
 2000-01-25 19:29:17 +00:00
mycroft 3f72e2e3f9 Oops; fix a bug in the previous: 
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
 2000-01-25 18:04:07 +00:00
augustss b9a4fe55b5 Switch the HSE and HCPE messages. Pointed out my mycroft. 2000-01-25 17:31:05 +00:00
augustss 0acef2fd69 Allow the set of PCI irqs to be overridden. 2000-01-25 17:20:47 +00:00
sommerfeld 62224d5f23 Pick source address for ICMP errors a bit more intelligently when 
there are multiple addresses on the interface.

From Marc Horowitz <marc@netbsd.org>, who left this sitting for too long.
 2000-01-25 17:07:56 +00:00
aymeric 3d9809edd8 oops. Comment out #include "wd.h" as I didn't commit generic wdc code yet. 2000-01-25 17:02:43 +00:00
itojun 9d17b2ca6a bring in stabilization codes in freebsd PAO/bsdi cnw driver. 
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
  not enabled by default - try it if you see performance problem on
  heavy traffic)
 2000-01-25 16:48:47 +00:00
enami 7209b41f18 - Kill the very last reference to VNODEPAGER, SWAPPAGER and DEVPAGER. 
- Remove empty lines at the end of file.
- The traditional hack, options<SPC><TAB>.
 2000-01-25 16:07:12 +00:00
thorpej c02060ba9b Regen. 2000-01-25 15:44:21 +00:00
thorpej d1c481fc31 Fix a typo. 2000-01-25 15:43:59 +00:00
mycroft e33c595472 Do a CARDBUS_BM_ENABLE just to be sure. 2000-01-25 15:29:43 +00:00
tsubai 14bc6c9eb8 Add PHYs. 2000-01-25 14:43:49 +00:00
tsubai 6b26a49ee9 Use MII device layer. 
XXX still 100Mbps receive side is very slow...
 2000-01-25 14:38:39 +00:00
joda 492bfe70f3 get the device name from pcidevs instead of having a list here 2000-01-25 14:34:24 +00:00
augustss 0335569abc Make it compile even if you leave out the ucom attachment. 2000-01-25 13:56:23 +00:00
augustss a27ee91364 Remove an item. 2000-01-25 13:27:07 +00:00
enami a119cb3677 In the diagnostic check in config_detach, inform the name of parent and 
its child who shouldn't be exist.
 2000-01-25 13:23:26 +00:00
augustss f0ebd281e5 Add done method for root control transfers. 2000-01-25 12:06:21 +00:00
augustss 73ce2abd33 Make sure PIRQD enable bit is set. From FreeBSD. 2000-01-25 11:26:06 +00:00
haya dccf05f858 Do pccbb_chipinit() after YENTA register space allocation. 
Add TI PCI 1451 PCI-CardBus entry.
 2000-01-25 09:36:43 +00:00
enami b1f85ee905 Don't put leading space, otherwise diskerr() prints unnecessary space 
like this:
wd0h:  aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
 2000-01-25 09:33:12 +00:00
pk 855fe23671 Prevent possible wayward loop. 2000-01-25 09:30:00 +00:00
enami 65c138fea0 - Print a name of root device even if it is a network device. 
- If RB_ASKNAME, only dumpdv holds the results asked interactively.
  Examie dumpspec only when !RB_ASKNAME.  This allows us to override
  dumps on none in kernel config file by booting kernel with RB_ASKNAME.
- Slightly rearrange code so that it more matches to comment.
 2000-01-25 09:23:59 +00:00
enami 5cb9984dd0 Replace long delay with sleep. 2000-01-25 09:17:35 +00:00
enami 012a23a770 Use config_pending and let the kernel thread to attach a card even on boot. 2000-01-25 09:14:27 +00:00
haya f18e32d670 Regen. 2000-01-25 09:06:50 +00:00
haya 7b4d7aaba1 Add TI PCI 1451 PCI-CardBus bridge. 2000-01-25 09:04:03 +00:00
augustss beaf3d82fc Ooops, add another ucom file. 2000-01-25 08:46:00 +00:00
augustss 85fcd0b58d Update for the ucom(4) addition. 2000-01-25 08:31:56 +00:00
augustss a2b1ac707a Split the umodem driver into two parts: the part that emulates a tty over 
two bulk pipes, and the setup and status fiddling goo.
This allows the former part to be shared by other drivers that need to
look like a tty.
 2000-01-25 08:12:58 +00:00
mycroft 509c38cc44 Regen. 2000-01-25 08:07:14 +00:00
mycroft 6a4d06f322 Use the Ethernet vendor ID to differentiate multiple cards with the same 
vendor,product pair.  (Yuck.)
 2000-01-25 08:06:49 +00:00
tsubai 05ceaaaad5 Add UniNorth. 2000-01-25 07:19:11 +00:00
jlam 03ebb087f7 Regen. 2000-01-25 06:53:26 +00:00
jlam 4d836ce7f2 Fix product code for Aironet PC4800. Should be 0x0007. 2000-01-25 06:52:54 +00:00
chopps b5064330de The cfe is initialized to the default entry, when a table entry value 
is present don't OR in the flags with the defaults, replace them.
 2000-01-25 06:36:17 +00:00
chopps b50b01e020 Don't enable the interrupt until after we cycle the power, disable 
interrupt at disable, and make this code look more like the std pcic
code.  From Mycroft and I.
 2000-01-25 06:16:34 +00:00
chopps 8c090e4862 set havenet to 0 when we are switching between operating modes and only 
after association in ifrastructure mode.  Also, deal with roam start
and rejoin net commands.
 2000-01-25 05:32:28 +00:00
thorpej be3c43687c Make sure the latency timer is set to a reasonable value. 
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
 2000-01-25 03:44:27 +00:00
enami 047cc5e94f Cleanup setroot() a bit: 
- No longer necessary to use goto, just breaking the loop like other case
  is enough.
- Don't caliculate loop invariant every time.  Just reuse.
 2000-01-25 03:42:36 +00:00
thorpej 35f3518a91 Fix a fatal typo in a Pyxis SGMAP TLB bug workaround. Noticed by 
Jeff Roberson <nomad@nop.aliensystems.com>.
 2000-01-25 03:32:36 +00:00
thorpej c4d8a60bac Handle Cobalt Networks interfaces, which are 21143 pass 4.1 devices 
with a simple (MAC address only) SROM format.

From Soren S. Jorvang <soren@wheel.dk>
 2000-01-25 03:23:56 +00:00
thorpej 8f7ad1f798 When checking for a non-standard address ROM format, allow the 
Cobalt Networks address ROM through.

From Soren S. Jorvang <soren@wheel.dk>
 2000-01-25 03:14:12 +00:00
ad ea0751f1aa Finish with fixing the SOFTCURSOR stuff. 2000-01-25 02:44:03 +00:00