701cc4b663
Add support for the Xircom X3201-3 in 21143 emulation mode. This chip
...
appears on some Xircom and Intel RealPort(tm) cards.
From Rafal Boni, with some slight modifications from me.
2000-01-25 21:50:30 +00:00
32e3df96e2
need an ${.OBJDIR} now
2000-01-25 21:41:18 +00:00
e81d123f6d
try to dtrt for sector sizes <DEV_BSIZE (at least, don't divide by 0)
2000-01-25 20:42:33 +00:00
6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
52ee0b9f98
IFM_1000_FX -> IFM_1000_SX, like it's supposed to be, and add a few
...
more gigabit Ethernet tyes from FreeBSD.
2000-01-25 20:18:52 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
da499b1e3a
make the wait_ready loop use pcic_delay() (thus tsleep) too for cards
...
that take a while to become ready
2000-01-25 19:38:18 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
3f72e2e3f9
Oops; fix a bug in the previous:
...
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
2000-01-25 18:04:07 +00:00
b9a4fe55b5
Switch the HSE and HCPE messages. Pointed out my mycroft.
2000-01-25 17:31:05 +00:00
549295852e
-current's gcc seems to be a bit picky about using pointer-differences as
...
args to the "*" of a printf "%*.*s" pattern. Add some casts to int.
(At least on NetBSD, ptrdiff_t is typedef'ed to int anyways)
2000-01-25 17:21:07 +00:00
0acef2fd69
Allow the set of PCI irqs to be overridden.
2000-01-25 17:20:47 +00:00
62224d5f23
Pick source address for ICMP errors a bit more intelligently when
...
there are multiple addresses on the interface.
From Marc Horowitz <marc@netbsd.org>, who left this sitting for too long.
2000-01-25 17:07:56 +00:00
3d9809edd8
oops. Comment out #include "wd.h" as I didn't commit generic wdc code yet.
2000-01-25 17:02:43 +00:00
9d17b2ca6a
bring in stabilization codes in freebsd PAO/bsdi cnw driver.
...
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
not enabled by default - try it if you see performance problem on
heavy traffic)
2000-01-25 16:48:47 +00:00
6e75e4cb47
- Don't update the size of allocated storage until realloc successes.
...
- KNF left over.
2000-01-25 16:24:40 +00:00
0cd03c86b4
Fix use of -I and -P at the same time by refactoring so there's only
...
one set of code which knows how to resize the packet.
Report when we shrink MTU because of an EMSGSIZE return; fix
formatting to let this not look ugly.
Add a few likely MTU's to the table (1480 and 1280).
2000-01-25 16:24:32 +00:00
4978f056f6
better sync with #ifdef notdef part (in -i for AF_INET).
2000-01-25 16:07:13 +00:00
7209b41f18
- Kill the very last reference to VNODEPAGER, SWAPPAGER and DEVPAGER.
...
- Remove empty lines at the end of file.
- The traditional hack, options<SPC><TAB>.
2000-01-25 16:07:12 +00:00
5fa65dbb58
don't truncate IPv4 entries on -i (with -v). it is mainly for
...
"Network" column (13 digits, it will be 18 digits in maximum).
2000-01-25 15:56:55 +00:00
c02060ba9b
Regen.
2000-01-25 15:44:21 +00:00
d1c481fc31
Fix a typo.
2000-01-25 15:43:59 +00:00
086a35e065
Use tab to indent.
2000-01-25 15:43:43 +00:00
e33c595472
Do a CARDBUS_BM_ENABLE just to be sure.
2000-01-25 15:29:43 +00:00
14bc6c9eb8
Add PHYs.
2000-01-25 14:43:49 +00:00
6b26a49ee9
Use MII device layer.
...
XXX still 100Mbps receive side is very slow...
2000-01-25 14:38:39 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
0335569abc
Make it compile even if you leave out the ucom attachment.
2000-01-25 13:56:23 +00:00
a27ee91364
Remove an item.
2000-01-25 13:27:07 +00:00
a119cb3677
In the diagnostic check in config_detach, inform the name of parent and
...
its child who shouldn't be exist.
2000-01-25 13:23:26 +00:00
2486935741
Use .Ar macro for argument.
2000-01-25 13:06:51 +00:00
b29a1709da
Add a line about USB Ethernet adapters.
2000-01-25 12:15:32 +00:00
4a961a7fc3
some code cleanup
2000-01-25 12:09:19 +00:00
f0ebd281e5
Add done method for root control transfers.
2000-01-25 12:06:21 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
65c138fea0
- Print a name of root device even if it is a network device.
...
- If RB_ASKNAME, only dumpdv holds the results asked interactively.
Examie dumpspec only when !RB_ASKNAME. This allows us to override
dumps on none in kernel config file by booting kernel with RB_ASKNAME.
- Slightly rearrange code so that it more matches to comment.
2000-01-25 09:23:59 +00:00
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
beaf3d82fc
Ooops, add another ucom file.
2000-01-25 08:46:00 +00:00
6cd67182f5
Add ucom(4) man page.
2000-01-25 08:45:24 +00:00
85fcd0b58d
Update for the ucom(4) addition.
2000-01-25 08:31:56 +00:00
a2b1ac707a
Split the umodem driver into two parts: the part that emulates a tty over
...
two bulk pipes, and the setup and status fiddling goo.
This allows the former part to be shared by other drivers that need to
look like a tty.
2000-01-25 08:12:58 +00:00
509c38cc44
Regen.
2000-01-25 08:07:14 +00:00
6a4d06f322
Use the Ethernet vendor ID to differentiate multiple cards with the same
...
vendor,product pair. (Yuck.)
2000-01-25 08:06:49 +00:00
05ceaaaad5
Add UniNorth.
2000-01-25 07:19:11 +00:00
thorpej