pk
6fc7a5b45a
Define `sizeof(struct cpu_info)'.
1998-10-12 14:03:22 +00:00
pk
1fb4827a72
Take care of a MID not present when matching timer register sets.
1998-10-12 12:28:26 +00:00
chuck
8bef431273
remove unused share map code from UVM:
...
- update calls to uvm_unmap_remove/uvm_unmap (mainonly boolean arg
has been removed)
1998-10-11 23:20:59 +00:00
pk
b9d844a520
Allocate a private PCB, kernel stack and interrupt stack for each processor.
...
As a result, the stack setup code in locore.s changes slightly in
the MULTIPROCESSOR case. Also, make the stack redzone barrier (for
debugging only) a per-CPU entity.
1998-10-11 14:46:45 +00:00
thorpej
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
pk
5422d07da0
Construct a `flush_cache_all()' for Cypress CPUs.
1998-10-09 10:48:14 +00:00
pk
024e5f4c9a
More `#if defined(MULTIPROCESSOR)'s.
1998-10-09 10:08:52 +00:00
pk
57a688f81e
Init a variable.
1998-10-09 08:01:33 +00:00
pk
312385da0a
Define SMP versions of some cache flush methods.
1998-10-08 22:27:32 +00:00
pk
41d031837e
Define a message structure of inter-processor communication.
1998-10-08 22:25:42 +00:00
pk
f3c4a67a7f
Adapt to changes to the cpus[] array.
1998-10-08 22:23:44 +00:00
pk
34ad8e5fb7
Find out about the number of CPUs in the system before starting device
...
configuration, so we can build a cpus[] array without "holes".
1998-10-08 22:14:44 +00:00
pk
a61ee50b27
Move [gs]etcontext and [gs]etpte() to pte.h
1998-10-08 21:49:12 +00:00
pk
e6bbfcc58a
Move [gs]etcontext() and [gs]etpte() to pte.h
1998-10-08 21:47:34 +00:00
thorpej
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
pk
2727683a09
more DIAGNOSTIC sanity checks
1998-10-06 19:24:03 +00:00
thorpej
0729240c88
Move the "XXX re-zero proc0 user area" to the end of configure(), before
...
interrupts are enabled.
1998-10-06 18:58:09 +00:00
thorpej
5006dbf868
cpu_set_kpc() prototype is already in <sys/systm.h>.
1998-10-05 22:11:15 +00:00
pk
40beab6ad6
If a lock is held do not spin in a read/write loop but just read the lock
...
until it is released. This is easier on the bus cache coherency logic.
1998-10-05 19:58:19 +00:00
christos
550ee6b308
rename getprop routine to avoid conflict with the one in bsd_openprom.h
1998-10-05 07:13:07 +00:00
christos
0bf5ff6ade
make this compile with DIAGNOSTIC again.
1998-10-01 21:26:55 +00:00
thorpej
c5b8d42e66
Need 14 longs for jmp_buf now (sigcontext has 128-bit signal mask at the
...
end).
1998-10-01 03:28:11 +00:00
pk
f382e91b5e
Add a field to identify the processor that has a process' FPU context.
1998-09-30 18:40:58 +00:00
pk
4826aac9cf
Make the current FPU owner (`fpproc') a per-CPU entity. Unresolved issue
...
as yet: lazy FPU context switching may require co-operation from other
CPUs.
1998-09-30 18:38:57 +00:00
pk
8c29324cc7
Kernel configuration with multi-processor support.
1998-09-27 15:10:25 +00:00
pk
0a090af2c7
Add `ldstub()'.
1998-09-27 14:32:14 +00:00
pk
e6ce8bcfc7
sparc spin lock functions.
1998-09-27 14:31:18 +00:00
pk
0a1a6fb7e0
This file is no longer used
1998-09-26 20:51:45 +00:00
pk
166c2a5fa5
fix typo
1998-09-26 20:15:59 +00:00
pk
9f352b7e15
Stop all other CPUs upon entering a debugger.
1998-09-26 20:14:48 +00:00
pk
01e64c640c
Implement mp_pause_cpus() and mp_resume_cpus(): pause and resume all
...
CPUs except the one running this code.
1998-09-26 20:13:56 +00:00
pk
6ad3a051e8
mp_{pause,resume,halt}_cpu() prototypes.
1998-09-26 20:12:06 +00:00
pk
8ddcd514a6
Use CPU start function in obp.c
1998-09-26 19:09:56 +00:00
pk
fe1cf94b9f
Add wrappers for PROM's CPU start/stop functions.
1998-09-26 19:08:09 +00:00
pk
a89a10c394
Add file obp.c
1998-09-26 19:06:47 +00:00
pk
43c1cb852c
Move PROM interface prototypes into openprom.h
...
Use the `openprom_addr' structure for passing around physical addresses.
1998-09-26 18:20:19 +00:00
pk
09a4cf6caa
Move PROM interface routines into their own file.
1998-09-26 18:15:34 +00:00
pk
eb8de83739
eccmemctl' inadvertently got into the
mandatory' list.
1998-09-25 11:40:16 +00:00
pk
27569e4050
Initialize pointer to the boot CPU's interrupt register.
1998-09-24 20:38:43 +00:00
pk
831354d6de
Add `intreg' cpuinfo offset.
1998-09-24 20:37:17 +00:00
pk
58ab38cb69
Use per-CPU interrupt status register.
1998-09-23 11:07:28 +00:00
pk
9eca565a37
Make cgsix_sbus & cgsix_obio dependent on their respective attribute.s
1998-09-23 08:49:46 +00:00
pk
d6746389a4
The nmi_* routines are sun4m-only.
1998-09-23 08:44:51 +00:00
pk
aa1cf01930
Express per-processor interrupt registers in a C structure as well.
1998-09-22 13:42:26 +00:00
pk
bd37118769
Dup header.
1998-09-22 13:41:03 +00:00
pk
eca50c1c33
Flush cache after diddling with trap vectors.
1998-09-22 13:40:08 +00:00
pk
1186ba5102
Introduce a `flush entire cache' method.
1998-09-22 13:39:19 +00:00
pk
5afb0e8bcb
Keep the per-processor interrupt status in the cpuinfo structure.
...
For now, map them to the fixed virtual addresses set up early in autoconf.c
1998-09-22 13:08:44 +00:00
chs
c945760779
sign-extend some operand types which need it.
1998-09-22 05:40:14 +00:00