c3f299a527
Now using dev/ic/ncr53c9x.c
1997-03-20 16:01:36 +00:00
4663c4fa2a
Sync with the sun3 version.
1997-03-18 23:49:07 +00:00
9f13c3afe5
Read the EEPROM once at attach time, then do user I/O on the copy.
...
Make /dev/eeprom support normal "read to EOF" behaviour.
Removed ee_console, ee_get_byte (dead code).
1997-03-18 23:31:59 +00:00
dee24f1082
Moved the _KERNEL declarations to machdep.h
1997-03-18 23:26:38 +00:00
1161fcc583
Add /dev/leds, and allow both that and /dev/eeprom to
...
return EOF when you read to the end of the device.
Garbage collect some dead code after the switch.
1997-03-18 23:21:04 +00:00
c960be72aa
Add /dev/leds (closes PR#2172 from der Mouse)
1997-03-18 22:21:50 +00:00
03c1c9cee0
Fixup dependencies
1997-03-17 20:59:47 +00:00
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
d531b1ed42
s/fpu_type/fputype/g
1997-03-17 19:03:11 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
b6f3695cd1
Use <m68k/m68k/support.s>
1997-03-16 11:04:52 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
40b1a6f68b
No longer need to define SUN_BOOTPARAMS
1997-03-14 21:28:38 +00:00
2f598d011a
Sync with sun3 (Trap 1,2,15 handlers)
1997-03-13 20:46:37 +00:00
0fefd47a64
Use arch/m68k/m68k/sig_machdep.c
1997-03-13 20:30:19 +00:00
ee531cb3c9
s/sun3x_/_/ in sun3x_(round|trunc)_(page|seg) macros
1997-03-13 17:40:33 +00:00
f3952a7326
No longer need to override DEFS
1997-03-13 16:19:01 +00:00
032d13fc7d
s/sun3_/_/ in sun3_(round|trunc)_(page|seg) macros
1997-03-13 15:58:49 +00:00
a9bc70551a
Clarify duties of traps 1, 2, 12, 15 for emulations
...
Include <m68k/m68k/sigreturn.s> code.
Add/fix some comments...
1997-03-11 22:58:57 +00:00
4756c63625
Call isr_soft_request() at most once per zshard interrupt.
...
In the softintr, raise to spltty before calling tty code.
1997-03-11 21:54:35 +00:00
05a47d22ea
Correct handling for Trap #2 in SunOS executables,
...
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
1997-03-11 21:30:51 +00:00
f64034e8f6
Sync up with changes in GENERIC
1997-03-11 21:21:49 +00:00
b4de41ef34
Update the description of the flags for "si" devices.
...
Remove wired-down scsi disk targets (no longer needed).
Add ch, ss, uk (scsi devcies) at mycroft's requst.
1997-03-11 20:59:10 +00:00
3aa49c4b33
Remove unnecessary differences (T_BRKPT, T_WATCHPOINT gone).
1997-03-11 20:31:20 +00:00
ec6bb1d018
s/-T/-Ttext/
1997-03-11 20:13:20 +00:00
4ad7ed0b97
Moved dev_net.[ch] to sys/lib/libsa
1997-03-11 18:29:30 +00:00
d0a45ab470
Use the macros sc_if, sc_addr to avoid lots of references to sc_arpcom.
1997-03-10 21:45:01 +00:00
51cfd7ed4d
Get the numbers of kernel MMU tables right.
1997-03-06 05:16:34 +00:00
9a79f92460
Clean out some junk I forgot to remove last time...
1997-03-06 00:15:56 +00:00
a4e5a18b63
Add pmap_bootstrap_setprom() with sets the PROM level-A tables to
...
allow the PROM monitor to see mappings in kernel space. This also
fixes a problem with exiting to the monitor with the stack pointer
set to some place in kernel space. Also fix NUM_KERN_PTES, and
change get_pte() so it works on any virtual address.
1997-03-06 00:04:18 +00:00
3ca8e4699d
Add pmap_bootstrap_setprom
1997-03-05 23:55:54 +00:00
201bc0aa96
Add ptest_addr
1997-03-05 23:54:08 +00:00
da2622290c
Allow access to the PROM via /dev/kmem (like the sparc port)
1997-03-05 23:02:29 +00:00
63221bf3b2
Fix race conditions that allowed the interrupt latch register to have
...
the wrong value. Now using the <m68k/asm_single.h> stuff from Leo.
1997-03-05 22:22:11 +00:00
eac582d36e
Do some of the clock init a little later, in clock_attach.
...
(plus some other mostly cosmetic cleanup)
1997-03-05 19:00:07 +00:00
88bf00b5bf
No need to block out ZS interrupts in clock_intr() as long as
...
we are careful to use the single_inst_* macros.
1997-03-05 00:01:13 +00:00
9587adc460
Fix race conditions that allowed the interrupt latch register to have
...
the wrong value. Now using the <m68k/asm_single.h> stuff from Leo.
1997-03-04 23:37:48 +00:00
7c5b45aead
Fix a warning.
1997-03-04 22:20:04 +00:00
c03be2ad19
Add declaration for isbad().
1997-03-04 21:59:08 +00:00
67f52ad8a0
Reinstate "isbad" which is used by the xd and xy drivers.
1997-03-04 19:33:23 +00:00
c0b46da054
Use IOMMU_PAGE_SIZE instead of NBPG, since theoretically the IOMMU page size
...
is different than the CPU page size.
1997-03-03 06:51:42 +00:00
290f55615a
Took switch statement out of main loop in pmap_protect() and explained more
...
of the rationale behind it.
1997-03-02 07:59:21 +00:00
8e9324f653
Allow access to the PROM via /dev/kmem (like the sparc port)
1997-02-28 22:35:12 +00:00
403bdb83fa
Add xxc_print functions to pass to config_found() instead of NULL.
...
(Thanks to Chris Demetriou suggesting the improvement.)
1997-02-28 21:23:06 +00:00
507bc60404
Define pmap_page_index as a macro.
1997-02-28 19:57:35 +00:00
03ff0a0c9b
Allow pmap_page_index to be a macro (in pmap.h)
...
Make pmap_free_pages() teturn what actually remains
(Thanks to Wolfgang Solfrank for suggesting the fix.)
Fix some typos while I'm here...
1997-02-28 19:55:37 +00:00
58a45b478c
Remove a diagnostic check in sunmon_reboot broke reboot on the sun3.
1997-02-28 19:47:15 +00:00
1354ca2916
Get rid of some printf noise.
1997-02-28 17:17:22 +00:00
4d534f3d52
Define VM_MAX_KERNEL_ADDRESS using KERN_END instead of a constant.
1997-02-27 18:22:53 +00:00
9b75e011ab
Allow option MCLSHIFT=x to control MCLBYTES etc.
1997-02-27 18:12:38 +00:00
gwr