thorpej
6c50cb64e1
Common module for bit-bang'ing the MII.
1999-11-17 17:47:59 +00:00
wennmach
2d27a472c9
Add some casts to u_char to get vis working again for characters > 0177
...
in VIS_OCTAL mode. Also, change the mask for the most significant tribble
to 03.
Reviewed by christos.
Fixes PR 8802.
1999-11-17 15:52:13 +00:00
kleink
eac5784583
Move signal management code common to all PowerPC platforms (sendsig(),
...
sigreturn(), sigcode) to a single place in the shared powerpc directory.
(The struct sigcontext etc. definitions were already being shared.)
1999-11-17 14:56:10 +00:00
kleink
c76614ee74
One more pmap_enter() catch-up.
1999-11-17 14:48:43 +00:00
soren
b4c9eea282
Add newline in debug printf.
1999-11-17 12:34:52 +00:00
fair
0616ece265
add "sh3"
1999-11-17 09:59:09 +00:00
fvdl
ba7e45647d
Initialize buffer dependencies list for soft updates when initializing
...
a new buffer.
1999-11-17 09:34:03 +00:00
thorpej
ce25407921
Make this a lot more like the PCI front-end.
1999-11-17 08:49:16 +00:00
mrg
e69f5159aa
fix a problem in previous: avoid using shadow variable names.
1999-11-17 08:43:53 +00:00
soren
f361f1b1b8
Also disable EX_CONF_INTPHY on the B model.
1999-11-17 08:42:06 +00:00
thorpej
5bd0644a68
Make the MII code match the `ep' driver's (*again*).
1999-11-17 08:03:30 +00:00
thorpej
e1a760a4a7
The 3c575-TX does *not* have an internal PHY.
1999-11-17 07:59:57 +00:00
thorpej
3f761bc3a7
Enable PCI bus renumbering, and add some CardBus Ethernet cards.
1999-11-17 07:34:48 +00:00
thorpej
11d76dfece
Add PCI bus renumbering code.
1999-11-17 07:34:15 +00:00
thorpej
0d79886ad5
Fix up the PCI bus numbering after fixing up interrupts.
1999-11-17 07:33:41 +00:00
thorpej
f4b4d4508a
Code from UCHIYAMA Yasushi's PCI BIOS patches to renumber the PCI
...
busses.
1999-11-17 07:32:58 +00:00
chs
7fa6c707d3
update a prototype for the new pmap_enter().
1999-11-17 06:16:49 +00:00
jun
b2557d295c
add:
...
#options SOFTDEP # FFS soft updates support.
1999-11-17 03:56:38 +00:00
simonb
fca16d1571
Move the "Attach the interface" section after printing the mac address
...
and buffer sizes. Stops the ipv6 attach info from messing up the
other driver info.
1999-11-17 03:42:24 +00:00
nisimura
8bcd9ac481
Consistent panic messages when erroneous kernel configurations are found.
1999-11-17 03:42:20 +00:00
matt
37cdd0b801
simply the conditional for ld.
1999-11-17 02:52:29 +00:00
jun
559f1ca662
re-generating isapnpdevs.c isapnpdevs.h
1999-11-17 02:03:10 +00:00
thorpej
92fcbce96b
Add my laptop's configuration file as an example.
1999-11-17 01:24:49 +00:00
thorpej
ad161afb12
Add glue for BIOS32 and PCI BIOS.
1999-11-17 01:22:29 +00:00
thorpej
4bfa60e3d3
Initialize BIOS32 and PCI BIOS as appropriate.
1999-11-17 01:22:09 +00:00
thorpej
d6d9fbe240
Interrupt router drivers from UCHIYAMA Yasushi's PCI BIOS patches,
...
cleaned up and reworked a bit be me.
1999-11-17 01:21:20 +00:00
thorpej
2026e5f71b
PCI interrupt routing fixup code, from UCHIYAMA Yasushi's PCI BIOS
...
patches, cleaned up and heavily reworked by me. Basic algorithm is
the same, although the code structure is now quite different.
Main differences:
- Initialization path is totally different.
- We use the `compat router' information, if present, to determine which
PCI ICU driver we should use.
- Fixup configuration headers on devices not on bus 0.
1999-11-17 01:20:38 +00:00
oster
e589155692
Remove some minor stuff that wasn't right, and wasn't even really used.
1999-11-17 01:16:37 +00:00
thorpej
e345f0f17c
Basic interface to the PCI BIOS and PCI Interrupt Routing table, separated
...
out from UCHIYAMA Yasushi's PCI BIOS patches, and fairly heavily reworked
by me.
Main differences:
- Only use the PCI BIOS to get the config mechanism and interrupt routing
info for now. No need to use the BIOS for PCI config access right now,
since the old mechanism works fine, and this keeps the code smaller.
- PCI BIOS initialization code path is much different.
- Always use the $PIR table if it exists, and only fallback to the
PCI BIOS 2.1 GetInterruptRouting call if it's not there.
This module does not include any of the fixup code; that is coming
in separate commits.
1999-11-17 01:16:36 +00:00
thorpej
4a98f5856e
Basic interface to BIOS32. Separated from UCHIYAMA Yasushi's PCI BIOS
...
patches and cleaned up a bit.
1999-11-17 00:55:50 +00:00
mrg
f6bf35c814
fix lp64 lossage.
1999-11-17 00:29:54 +00:00
nisimura
dab18ce266
A file which escaped from 11/15 jombo commit work.
1999-11-17 00:10:00 +00:00
augustss
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
augustss
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
augustss
d37a1f8e3b
Implement OSS_SOUND_MIXER_INFO.
1999-11-17 00:06:38 +00:00
augustss
41a71bdc48
Implement SOUND_MIXER_INFO.
1999-11-16 23:56:41 +00:00
kleink
99564313c8
Import tzdata1999j.
1999-11-16 22:43:06 +00:00
kleink
e092d92063
Merge tzcode1999i.
1999-11-16 22:41:02 +00:00
augustss
ffb29861c2
Add a few more diagnostics.
1999-11-16 22:19:03 +00:00
augustss
70ad5362d4
Fix a pointer test that I got wrong in the big code cleanup.
1999-11-16 22:15:50 +00:00
hubertf
a8bbeb8a4b
Add under which conditions the "read" builtin returns success/failure.
...
Suggested in PR 8813 by Eric Mumpower <nocturne@arepa.com>
1999-11-16 22:03:25 +00:00
mjacob
a7c74fb98f
Re-add stub Qlogic F/W files so that life is easier when/if the new
...
Qlogic F/W copyright is approved.
1999-11-16 18:48:40 +00:00
mjacob
8cf9a14802
Add in a step to actually probe for MCPCIAs. This allows us to run on
...
4100s that only have two of four possible MCPCIAs.
1999-11-16 18:37:24 +00:00
mjacob
2981278f40
Add in a define for a MCPCIA bridge register that would be suitable for
...
probing for with badaddr(9).
1999-11-16 18:36:27 +00:00
mjacob
ce28c5e558
Make sure a MCPCIA exists before trying to initialize it. Also make
...
sure a MCPCIA softc exists before trying to do post-config cleanup
on it.
1999-11-16 18:33:11 +00:00
matthias
87bb3a7b2b
make this work again with -mrtd.
1999-11-16 18:16:53 +00:00
abs
0e549049f7
Correct wargames quote, and while we are here be a little more selective
...
when checking if a game is valid (eg: '../../bin/csh')
1999-11-16 17:27:14 +00:00
tron
653c374a4c
Add "AKA".
1999-11-16 13:23:47 +00:00
tron
e6896dc7c0
Add missing "\" in two line shell command.
1999-11-16 13:15:09 +00:00
soren
75a2e0ef92
Typos.
1999-11-16 12:42:17 +00:00
