8a79f029ad
VRSAVE is SPR 256, not 238.
2002-03-04 13:37:42 +00:00
b5fde890d0
add cnpollc() calls around cngetc for TRAP_PANICWAIT
2002-03-04 04:07:35 +00:00
995081f947
Make this link again in the absence of envsys/sysmon.
2002-03-04 00:55:04 +00:00
b50fb54af2
Calculate and print the speed of G3 and G4 processors.
...
Add code to read the on-chip temperature sensor on the G3 and hook it in
to the envsys/sysmon subsystem. "envstat" now prints the CPU temperature.
2002-03-03 07:31:33 +00:00
1eeb28024d
Add sysmon data structures to struct cpu_info.
2002-03-03 07:09:09 +00:00
d26c78e764
All Moto PPC revisions should be printed as maj.min (0x0200 -> 2.0).
2002-03-03 07:09:01 +00:00
e0ba5cf38d
Add initial MPC7455 support.
2002-03-03 06:56:09 +00:00
997374a8dd
Add MPC7455
2002-03-03 06:47:25 +00:00
5d5aeaa547
Add bit definitions for the MMCR's, and event numbers for the events
...
that are common to the G3 and G4.
2002-03-03 06:38:31 +00:00
7a92615001
Correct the SPR numbers of PMC3 and PMC4.
...
SIA wasn't retconned, but the SPR number was wrong. Re-add it, and add
USIA.
2002-03-03 05:32:37 +00:00
c2b8ec655a
Delete the retconned SIAR SPR.
2002-03-03 05:17:48 +00:00
ee2cbbfe4a
Add MPC7xx/7xxx performance monitor control registers (MMCR0-2, UMMCR0-2).
2002-03-03 05:15:44 +00:00
28b2a20fb9
Add bit definitions for the MPC750 thermal management registers.
2002-03-03 04:31:53 +00:00
4a513728e8
Add end-of-comment missing in previous.
2002-03-02 21:36:27 +00:00
a34187bca3
Also reset segment register 0 on kernel entry: there may not always be
...
a fixed BAT entry covering segment 0, or not completely covering it,
and we do restore it on return to user level already.
2002-03-02 15:19:56 +00:00
dc0a08feaa
Note that Guarded bit is not implemented on the 601.
2002-03-02 15:07:35 +00:00
4b948be2fc
Disable BTIC on rev 2.0 or earlier MPC7450s as Motorola Errata #31 for the
...
MPC7450.
2002-03-02 02:18:38 +00:00
4324f37586
Use "#define<tab>".
2002-02-28 03:17:23 +00:00
39a685458d
Fix pastos & typoe.
2002-02-27 04:13:10 +00:00
178af24f65
Add a comment to where we increment intr_depth to show that intstk+INTSTK
...
== intr_depth. (gag)
2002-02-27 03:27:14 +00:00
e8116a8f5b
- Use DEV_ constants, instead of documenting the numbers!
...
- Delete cdev_decl(mm); where appropriate, and other hand-crufting [hi powerpc!]
2002-02-27 01:20:51 +00:00
f7a55f56d3
PIR is the same on 601.
2002-02-26 00:48:58 +00:00
67678b7c54
Handle the 601's Run Mode/Trace Exception.
2002-02-22 18:50:45 +00:00
543f1e7a2d
Handle the 601's Run Mode/Trace Exception as well.
2002-02-22 13:51:40 +00:00
2d8577fb83
Clean up some rampant code duplication wrt ieee number handling:
...
- Add alignment-safe double and float unions.
- Use the above for the __infinity and __nan constants on all
architectures that use the standard ieee754 representation of
those constants.
- Add a single copy of various ieee754 math functions (frexp, isinf,
isnan, ldexp and modf) that had numerous duplicates among the
arch-specific directories.
- Use the above functions on all architectures where the generic C
versions where used. Architectures that had local assembly
routines are untouched (for those functions only).
2002-02-19 13:08:12 +00:00
b744097a5f
allow writing to write-only mappings. fixes PR 3493.
2002-02-14 07:08:02 +00:00
11402be7a5
Header for the 601's I/O Controller Interface Address Translation
...
segment register format.
2002-02-09 17:44:40 +00:00
9827f27b9f
Update from thorpej:
...
* Define type and size of _mcount stub to make PIC code happy.
* Rename mcount to __mcount to get it out of the user namespace.
2002-02-07 05:13:35 +00:00
3b7a9506f7
Printf the 601's HID0.
2002-02-06 20:00:48 +00:00
69e30815cf
Add a printf bitmask for HID0.
2002-02-06 19:59:30 +00:00
cd6a8bc27c
Add MPC601 MQ and RTCU/RTCL SPRs.
2002-02-05 19:49:17 +00:00
ecf4398451
increment uvmexp.traps on entry to trap()
2002-02-02 22:02:00 +00:00
0ac4681659
add support for kgdb over zs
2002-01-06 00:35:10 +00:00
d77edb248a
Print negative SIMM operands correctly; previously, negative numbers
...
were bogus.
2002-01-05 22:07:26 +00:00
a0dca6bb1d
Remove gratuitous ", " after the last opcode for SIMM and UIMM opcodes.
2002-01-05 20:22:52 +00:00
c7996c4a47
Print addresses symbolicly using the new ddb helper function, db_symstr().
...
This disassembler still needs a fair chunk of work.
2002-01-05 20:21:37 +00:00
86e773e9fd
change apparent typo of MS_SFILES to MD_SFILES
...
This fixes some dependency problems with locore.S
2002-01-05 17:58:48 +00:00
ac054a2787
Support
...
t/t PID
on the powerpc. (remember to use 0tPID if pid is in decimal...)
2002-01-03 22:15:06 +00:00
9451559ef4
pmap_page_protect(VM_PROT_NONE) must remove all mappings in the PV list,
...
even if they are wired. we need to be able to remove all mappings to
pages that are being freed due to (eg.) file truncation.
2002-01-02 00:51:33 +00:00
98cbceb382
handle have_address=TRUE
2001-12-31 18:29:07 +00:00
f03e8813e0
allow ddb access to lr, ctr, cr and xer registers when not on PPC_IBM4XX
2001-12-30 20:53:04 +00:00
98d1a18067
remove unused variable in kgdb_acc
2001-12-30 20:50:53 +00:00
1b65d8fd30
fix single stepping and continuing from breakpoints in ddb
2001-12-27 10:32:23 +00:00
2bea447d60
sync the instruction cache even when only writing 2 or 4 bytes
2001-12-27 10:25:41 +00:00
d91a86f994
revert revision 1.13
...
this turns single stepping back off since it doesn't correctly work
note that without single stepping, several things do not work as
expected, including continuing from interrupts
2001-12-24 16:57:40 +00:00
ce516e4e69
add declaration of ipkdb_trap_glue
2001-12-23 08:25:27 +00:00
3ff5d761b8
restore msr on return from ddb, this allows single stepping
2001-12-23 08:19:44 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
25e9f1f519
Provide basic bus_space_mmap(). Noted by self and in PR port-powerpc/14873.
...
This at least allows the compile to complete. There are still Issues with
vga_pci.c's assumptions about a PC-ish environment.
2001-12-10 20:30:21 +00:00
51535d4bf5
Add support for dumping ELF-cormat core files.
2001-12-09 23:05:56 +00:00
kleink