from being inactivated under some conditions. Removed vnodes are now
inactivated when the VDIROP flag is cleared, and to prevent block
accounting problems this clearing has been postponed until
lfs_segunlock.
This prevents a rare condition in which Ifile "ifile" blocks, that is, the
blocks of the ifile which point VOP_VGET at the inode block containing the
requested inode, from being "unwritten" when cleaning during intense disk
activity.
dirop writing. In particular, lfs_writevnodes now writes all buffers from
a flushed vnode whether cleaning or not, and the same with the Ifile; and
lfs_segwrite does not attempt to write data from other non-cleaning vnodes,
even if a vnode is being flushed.
(Previously buffers could be marked dirty by the cleaner, and possibly by
other means.)
Also check for softdep mount in vfs_shutdown before trying to bawrite
buffers, since other filesystems don't need it and lfs doesn't bawrite.
(This fragment reviewed by fvdl.)
Partially addresses PR#8964.
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
system crashed, inodes could be allocated that were not referenced. (Though
not a serious problem, it evidences itself in phase 4 of fsck_lfs.) Fix
this by marking if_daddr with UNASSIGNED before the inodes are actually
written; at mount time the ifile is checked for UNASSIGNED entries and
any that are found are linked back into the free list. (The latter
functionality should move into the roll-forward agent when it materializes.)
post-mortem of a production machine. Also, take the active dirop
count off of the fs and make it global (since it is measuring a global
resource) and tie the threshold value LFS_MAXDIROP to desiredvnodes.
fail, because the particular block being requested was always in the cache
(although other routines that cannot afford to call lfs_check have in the
meantime stuffed the cache full of dirty blocks). Partially addresses PR 8383.
filesystem. In particular,
- Fix mknod deadlock, described in PR 8172.
- Enable lfs_mountroot.
- Make lfs_writevnodes treat filesystems mounted on lfs device nodes properly,
by flushing that device rather than trying to add blocks to the device inode.
This, in combination with lfs boot blocks, will allow operation of an all-lfs
system.
call with F_FSCTL set and F_SETFL calls generate calls to a new
fileop fo_fcntl. Add genfs_fcntl() and soo_fcntl() which return 0
for F_SETFL and EOPNOTSUPP otherwise. Have all leaf filesystems
use genfs_fcntl().
Reviewed by: thorpej
Tested by: wrstuden
a bug in fragment extension that could run the count negative. Also, don't
overcount for inodes, and don't count segment summaries. Thus, for empty
segments the live bytes count should now be exactly zero.
will DTRT with vnodes marked VDIROP. In particular, the message
"flushing VDIROP" will no longer appear, and the filesystem will remain
stable in the event of a crash.
This was particularly a problem with NFS-exported LFSes, since fsync
was called on every file close.
if the version number is higher than we know about. This allows, e.g.,
changes in the format of the ifile, segment size restrictions and boundaries,
etc., which would not affect existing fields in the superblock, but which
would drastically affect the filesystem, to be smoothly integrated at a
later date.
on (nodes which are not marked IN_MODIFIED/IN_CLEANING, but which have dirty
buffers), by marking them with the appropriate flag if dirtybuffers were added
while the write was in progress.
conditions. Also change the default setting of lfs_clean_vnhead to 0, which
seems to make the locking problems go away (although this is difficult to
test as I can't reliably reproduce them).
then immediately reloaded, their dinodes were located in an inode block
which was not on disk at the advertized location, nor in the cache (although
it would be flushed to disk next segment write). Fix this by using getblk()
instead of lfs_newbuf() for inode blocks.
for the first write. If this is not done, the cleaner may try to clean the
current segment out from under the writer if the filesystem is mounted after
a crash (or any other time that the dirty:clean segment ration is high enough).
* The MNT_UPDATE case had a null pointer dereference. (This is a good example
of why blindly adding bogus initializiers is a FUNDAMENTALLY BAD IDEA!)
* Make sure the whole ufsmount is zeroed, as the export code relies on this.
* If we decided to use the second/alternate superblock, make sure to copy the
in-core version from the right buffer.
Also, reenable NFS exporting.
in turn forces a flush of the vnode, whether or not it is involved in a dirop.
(This can happen during a remove or rmdir, when the directory is shrunk.)
Because of the nature of dirops, however, flushing a vnode involved in a dirop
is disallowed (and was marked with a panic). This patch has lfs_truncate
call a specialized vinvalbuf that only invalidates buffers following the new
end-of-file, and thus does not require a flush. Also the panic is demoted,
in case I missed any other path to lfs_vflush.
namely, toggle whether vnodes loaded only for cleaning (as opposed to
normal filesystem use) are freed to the *head* of the vnode free list,
rather than the tail. This should avoid a possible cache flushing
effect, if the cleaner cleans a segment containing a large number of
live inodes.
dirop is completely written to disk. This means that ordinary calls to
ufs vnops which would ordinarily call VOP_INACTIVE through vrele/vput,
don't. This patch detects that condition after such vnops have been
run, and calls VOP_INACTIVE if it would ordinarily have been called by
the ufs call.
if we are short on vnodes, lfs_vflush from another process can grab a
vnode that lfs_markv has already processed but not yet written; but
lfs_markv holds the seglock. When lfs_vflush gets around to writing it,
the context for copyin is gone. So, now lfs_markv calls copyin itself,
rather than having lfs_writeseg do it.
the LFS since the 4.4lite2 code was merged into NetBSD.
TODO updated to remove everything marked DONE in 4.4, and add in a list
of more current things to do.
Get rid of comments about the cleaner syscall code and missing fragment
support from README.
include:
- DIROP segregation is enabled, and greater care is taken
to make sure that a checkpoint completes. Fsck is not
needed to remount the filesystem.
- Several checks to make sure that the LFS subsystem does not
overuse various resources (memory, in particular).
- The cleaner routines, lfs_markv in particular, are completely
rewritten. A buffer overflow is removed. Greater care is taken
to ensure that inodes come from where lfs_cleanerd say they come
from (so we know nothing has changed since lfs_bmapv was called).
- Fragment allocation is fixed, so that writes beyond end-of-file
do the right thing.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
to "options FFS_EI". The superblock and inodes (without blk addr) are
byteswapped at disk read/write time, other metadatas are byteswapped
when used (as they are acceeded directly in the buffer cache).
This required the addition of a "um_flags" field to struct ufsmount.
ffs_bswap.c contains superblock and inode byteswap routines also used
by userland utilities.
architectures), truncate them intelligently instead.
The truncation is done centralized in vnode_pager.c.
This prevents from wrap-over effects when parts of large (>2^32 byte) files
are mmapped.
Don't allow to mmap above the numerical range of vm_offset_t.
This is considered a temporary solution until the vm system handles the
object sizes/offsets more cleanly.
- added an "union inode_ext" to struct inode, for the per-fs extentions.
For now only ext2fs uses it.
- i_din is now an union:
union {
struct dinode ffs_din; /* 128 bytes of the on-disk dinode. */
struct ext2fs_dinode e2fs_din; /* 128 bytes of the on-disk dinode. */
} i_din
Added a lot of #define i_ffs_* and i_e2fs_* to access the fields.
- Added two macros: FFS_ITIMES and EXT2FS_ITIMES. ITIMES calls the rigth
macro, depending on the time of the inode. ITIMES is used where necessary,
FFS_ITIMES and EXT2FS_ITIMES in other places.
'const char *', and 'void *', respectively. The second arg is taken directly
from user arguments, and is const there, so must be const in the prototypes
and functions. The third arg is also taken directly from user arguments.
It doesn't have to be changed, but since it's cleaner to keep the type
the same as the user arg's type, and I'm already making the 'const char *'
change...
align 32bit integers. Use explicit sized typing at some other places.
XXX This still won't fix lfs for 64bit machines, as we have some
assumptions about sizeof(pointer)=sizeof(u_int32_t) in here, and (if I
looked right) a misaligned u_int64_t. The right fix (to cite cgd) will
be to seperate on-disk-representation from in-core, but I don't have
the time (at the moment) to do this.
gcc thinks that the 'q' modifier describes a "long long", and so -Wformat
whines when printing with 'q' on the alpha, since int64_t-sized types are
done with variations on "long" rather than "long long".
* Make 2nd and 3rd args timespecs, not timevals.
* Consistently pass a Boolean as the 4th arg (except in LFS).
Also, fix ffs_update() and lfs_update() to actually change the nsec fields.
* Change the argument names to vop_link so they actually make sense.
* Implement vop_link and vop_symlink for all file systems, so they do proper
cleanup.
* Require the file system to decide whether or not linking and unlinking of
directories is allowed, and disable it for all current file systems.
perseant