4fe3a900f3
comment: LEAPYEAR is not entirely correct
1996-03-17 00:56:24 +00:00
5b2bf5a548
add rom routines declarations
1996-03-16 23:51:44 +00:00
64356e6df3
fix printf format strings
1996-03-16 23:31:45 +00:00
dafa7f2c60
fix format strings. move rom routine decls in bsd_openprom.h
1996-03-16 23:31:42 +00:00
ed2239daea
Fix format strings in panic()
1996-03-16 23:31:40 +00:00
0c4805af23
Fix typo in fsrtoname() use && as intended instead of &
1996-03-16 23:31:36 +00:00
4b636d71eb
cast argument to probeget()
1996-03-16 23:28:37 +00:00
2cb7b87853
fix formats in printf() and panic()
1996-03-16 23:28:35 +00:00
5c32202b7e
fix format in printf()
1996-03-16 23:28:33 +00:00
fe4bb997c9
fix format in panic()
1996-03-16 23:28:30 +00:00
09ff5d56a7
fix format in printf()
1996-03-16 23:28:28 +00:00
aab8906300
fix format in log()
1996-03-16 23:28:27 +00:00
f2b8b6e73e
include <sys/systm.h>
1996-03-16 23:28:25 +00:00
02bcb06a88
This could have never worked (fb in attach was never initialized); include <sys/systm.h>
1996-03-16 23:28:23 +00:00
2ce5f1478b
Add _BSD_WINT_T_ definition so we can handle wint_t type added in NA1.
1996-03-16 01:31:45 +00:00
6d492269e0
Add -Wall -Wstrict-prototypes -Wmissing-prototypes
...
to the kernel build. The sparc is clean now!
1996-03-15 00:02:28 +00:00
9af46afa21
Fix prototypes for the latest kpc changes.
1996-03-15 00:01:21 +00:00
9673aca601
Fix prototypes that were added with the latest kpc changes.
1996-03-15 00:00:39 +00:00
9c75606e8c
Add prototypes and fix bugs:
...
- softclock was called with extra argument.
- missing %x formats in printf's
- kgdb_copy called with only two arguments.
Fix conf.c so that it used the _conf.h files from other places instead of
rolling its own.
1996-03-14 21:08:50 +00:00
9a07d9dec9
Add missing prototypes and fix the fp struct for svr4.
1996-03-14 19:49:04 +00:00
03b701e393
Bring prototypes into scope and fix compiler warnings.
1996-03-14 19:44:30 +00:00
ab59f984ab
Add and bring prototypes into scope.
1996-03-14 19:41:49 +00:00
485ccae478
Insert child_return() for the benefit of child return path from cpu_fork().
1996-03-14 00:55:59 +00:00
0b1cba4b0b
Implement cpu_set_kpc() and use its machinery to by-pass a child out
...
of the kernel from cpu_fork().
1996-03-14 00:54:34 +00:00
d48d8e1512
Install machinery for cpu_set_kpc().
1996-03-14 00:54:06 +00:00
808df5543f
Remove cpu_set_init_frame().
1996-03-14 00:49:20 +00:00
894fde6bdd
Remove __FORK_BRAINDAMAGE.
1996-03-14 00:48:30 +00:00
dc3c7fb2ba
Actually enter executables where promised...
1996-03-14 00:11:29 +00:00
90fb0cc9da
Don't come down so hard on targets that ignore SDTR msgs.
1996-03-05 09:29:58 +00:00
9bb0e5dba5
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2169)
...
[these bugs apply to the xy as well as the xd driver]
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:13:39 +00:00
9fee13d104
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2169).
...
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:11:32 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
855b6def84
Add ns_cksum.
1996-03-02 23:55:17 +00:00
9f2837ac9b
"oops", forgot to check this in...add entries for the cgfour and cgeight.
1996-03-01 08:11:00 +00:00
f579d1a485
Fix an operator precedence botch. *sigh* This just hasn't been my week.
1996-03-01 07:44:43 +00:00
abd3cf4df2
Don't reset `xs->retries'.
1996-02-29 23:33:48 +00:00
bf59310f69
Fix typo, and bring back VA hole handling.
1996-02-29 22:15:13 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
93dff23036
Back out the "don't use DMA if SCSI_POLL is set" saftey-net. The
...
MI 5380 code did something I didn't really expect, which caused DMA
to disable itself if only DMA was enabled. *grumble*
1996-02-29 03:28:38 +00:00
2de7b2e5cb
update PMAP_PREFER
1996-02-28 22:44:33 +00:00
8bea3309c3
Fix typo
1996-02-28 22:09:27 +00:00
50c8d6cdb0
Oops...missed to places where I could have used CPU type macros.
1996-02-28 20:53:02 +00:00
edf9d66f32
First-cut support for P4 framebuffers. Currently supports P4 variants
...
of bwtwo, cgfour, cgsix, and cgeight. Includes support for attaching
the overlay plane of the cgfour and cgeight as a bwtwo instance (a'la
SunOS).
P4 register descriptions, cgfour driver, and cgeight driver partially
derived from OpenBSD.
This code may still need polishing.
1996-02-27 22:09:14 +00:00
fe5a56ec9d
Be sure to malloc() in page-sized units.
1996-02-27 13:17:01 +00:00
70eee90be3
remove a printf
1996-02-27 09:10:24 +00:00
9216cf3276
Drain rev 1 chips in dma_reset().
1996-02-27 00:36:11 +00:00
2c646f8da5
`bwtworeg' is just about the same as the generic `fbcontrol'.
1996-02-27 00:32:34 +00:00
6b5eb65b21
bt_reg => fbcontrol.
1996-02-27 00:14:17 +00:00
8628f94179
Use `video enable' bit in framebuffer control.
1996-02-27 00:11:14 +00:00
2fe54615fb
Define a couple more framebuffer control bits.
1996-02-27 00:09:23 +00:00
517988b940
Interims:
...
Comment out `STATINT' checking; this is apparently unreliable on some
ESP revisions.
Deal with target initiated synch re-negotiation.
1996-02-26 14:48:30 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
a3ab0e81da
Use CPU-type macros.
1996-02-25 22:03:20 +00:00
3d182fe265
Use CPU-type macros
1996-02-25 21:53:49 +00:00
ba0eb7ea59
Use CPU-type macros.
1996-02-25 21:45:53 +00:00
1a5d5e25c6
Add an "sw_options" patchable global so that folks can still live life
...
on the edge (of sw DMA uncertainty) with pre-built kernels.
1996-02-23 16:29:34 +00:00
ef3500b579
Attempt to work around a hardware bug that screws up DMA on the 4/100.
...
Apparently, some early 4/100 DMA controllers do illegal memory access on
large ( >= NBPG ) transfers at the end of the transfer. This appears
as SI_CSR_DMA_BUS_ERR in the csr. To work around this, we simply
transfer the (up to 3) missing bytes from the bpr. We were doing this
anyway, so the work-around is to ignore the bus error.
BUT! I goofed when I implemented the "left-over byte" code for the sw!
It *should* be correct now. Keep metrics (acceeible via DDB) on the number
of 1, 2, and 3 byte clean-ups, as well as the number of "clean" transfers,
just so we can get a clearer picture.
Thanks to Andrew Gillham <gillham@whirlpool.com> for noticing this!
1996-02-23 07:24:45 +00:00
291267e40c
Implement SDEV_AUTOSAVE.
1996-02-22 23:35:04 +00:00
2f3ad94f8d
An #ifndef _LOCORE to make this file safe to include in locore.s.
...
Introduce a couple of `CPU-type' helper macros to reduce the preprocessor
tangos in many a source file.
1996-02-22 21:59:08 +00:00
e259a02425
Correct some prototypes.
1996-02-22 15:04:07 +00:00
c86505a6a5
If we get a transfer with the SCSI_POLL flag set, don't use DVMA. We
...
only get these during autoconfiguration and during crash dumps. During
autoconfiguration, the transfers are small enough that DVMA won't be used
anyway. However, using DVMA during a crash dump can be dangerous,
depending on the nature of the panic, so we avoid it.
1996-02-22 07:25:05 +00:00
2f132eb5e7
Bring in Gordon's fix from the sun3 port:
...
Correct the DMA transfer count when the target disconnects before
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 07:14:53 +00:00
a246f6c835
Fixup some RCS ids.
1996-02-22 06:50:49 +00:00
66fedbbe19
Correct format in a printf().
1996-02-21 10:21:14 +00:00
adeed1d823
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:36:51 +00:00
b9de283ae6
Fix typo; pointed out by jtk.
1996-02-19 10:30:09 +00:00
9b46365465
Adapt to changed kernel data structures (PR#2100).
1996-02-19 09:46:32 +00:00
a9012450ec
Fix bug in bwtwounblank() ... didn't have code to enable video on sun4/200
...
obio framebuffer. Noticed when my 4/260 dropped into DDB and the screen
didn't unblank. Pull all of the video enable/disable into functions so
this mishap doesn't happen again.
1996-02-19 00:15:46 +00:00
a5ea7547d2
Correct timetochip() prototype.
...
Cleanup microtime() a bit.
1996-02-18 15:38:41 +00:00
1a62c0b31b
delay() takes an unsigned int; get the code to match.
1996-02-17 09:47:48 +00:00
1caa80a432
Bring prototypes into scope.
...
Fix a few bogus `return's.
1996-02-17 00:03:17 +00:00
f1518de67c
delay() prototype.
1996-02-16 22:13:34 +00:00
cdb37b19d3
Account for the fact that `clockreg' might not be page-aligned.
...
Misc prototype goo.
1996-02-16 22:12:13 +00:00
da1402dcb7
Eliminate <setjmp.h>.
1996-02-14 01:03:17 +00:00
fe9d17199a
If `cold' simply halt the machine in boot(). Note, this still leaves a window
...
where vfs_shutdown() and sync() can be called prematurely.
1996-02-13 23:59:02 +00:00
54bd5c6954
Fix ANSI prototype goof (from Openbsd).
...
Add explicit return type to most functions.
V3 PROM console support.
1996-02-13 22:49:48 +00:00
773f74b60d
Change some caddr_t's to void *'s.
1996-02-13 22:43:33 +00:00
58cd67c20d
Make sure we assign a value to variables we use.
...
Don't express size of NVRAM in terms of machine page size.
1996-02-13 22:38:25 +00:00
8a8e1a4d94
caddt_t -> caddr_t
1996-02-13 17:13:22 +00:00
cbb1d18e70
- Fix setcxsegmap prototype.
...
- Cast ?TO? macros to NULL to avoid compiler warnings
1996-02-13 17:04:58 +00:00
967dc9fa87
make pmap_page_index return int instead of u_long
1996-02-12 21:15:37 +00:00
3237aa23d2
Avoid compiler warning.
1996-02-12 21:05:18 +00:00
d5ddbf99ab
Separate DMA and SCSI routines more.
1996-02-12 15:59:51 +00:00
8a6ad45eed
In fdcretry(), if we're not using implied seeks, set the state to DOSEEK
...
rather than SEEKCOMPLETE before retrying the operation. If implied seeks
are being used, the state is set to DOIO (no change). This is why I
couldn't reproduce the disk_unbusy() panic on my SS2; it uses implied
seeks. Patch from John F. Woods <jfw@jfwhome.funhouse.com>
1996-02-10 18:37:36 +00:00
c6edd77b23
A few prototype fixes
1996-02-09 23:14:14 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
2accbfeefb
- moved disk_busy() call from xdstrategy() to xdc_startbuf()
...
[prevents disk_unbusy panic when disk is loaded (if no
free IOPBs, xdstrategy() would queue the buffer for pickup
by xdcintr() but xdcintr() would never call disk_busy().
xdc_startbuf() is a better place since all bufs are routed
through here] problem detected by girish@dworkin.wustl.edu ,
diagnosed and corrected by me.
- move disk_unbusy() call in xdc_remove_iorq() before the call to
XDC_FREE() [don't want to access a data structure that was just put
on a free list]
1996-02-08 04:40:33 +00:00
fa30609066
Protect clearing the Intersil chip's interrupt with splhigh(). If this
...
gets interrupted (by the higher priority zs hardware, for example),
the clock can come to a dead stop!
1996-02-06 22:59:03 +00:00
d0abefaa36
beq -> be; some assemblers don't know about this alias.
1996-02-06 12:11:15 +00:00
52c068d6e6
Be sure to reset the chip when relection fails to prevent corrupting data.
1996-02-06 02:03:46 +00:00
684b37e33e
vm prototype changes.
1996-02-05 01:59:12 +00:00
5fd7df3063
Move splbio to level 5.
1996-02-03 16:10:58 +00:00
67eb39bcda
Make this compile with `traditional' cpp.
1996-02-03 04:36:01 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
2dfbe4f961
Don't define _LOCORE here.
1996-02-02 20:05:08 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
b97cbfb606
Implement DIOCLOCK. It's a no-op in this driver.
1996-01-30 18:31:05 +00:00
427556aeab
Move struct definitions to MD code.
1996-01-24 19:52:57 +00:00
353f4388fb
Use a shutdownhook to make sure the drive motor is turned off
...
at halt/reboot time, as suggested by Perry Metzger.
1996-01-16 19:35:06 +00:00
8a5504241e
Three distinct changes:
...
- Better disklabel handling. While a disklabel isn't used
in the driver, some versions of the OpenPROM insist on
one being present in order to boot from floppy. These
changes provide a default label (in a way similar to how
the SCSI disk driver provides a default) so that a user
can more easily place the label on the disk.
- Fix semi-bug in bootpath handling. It appears as if the
bootpath can appear in a couple of formats: "/fd@0,0", which
is what bootpath_fake() creates on v0 proms and may be
passed by some v2 proms, and "/fd0" which is what the
v2 prom on my SS2 passes. We now handle both formats.
- Use a mountroot hook to eject the floppy and wait for
the user to insert a filesystem floppy if we're the boot/root
device.
1996-01-15 00:14:42 +00:00
3f8e0d27a6
Add a "mountroot hook" mechanism so that devices can take care of
...
special needs before being used in (*mountroot)().
1996-01-15 00:06:49 +00:00
ef895a47d4
- call mapiodev() with sizeof(struct xyc) rather than ra_len (which is
...
zero since xycmatch no longer sets it). [if you call mapiodev()
with a zero size it will reuse the KVA it returns, swiping the device
out from under you!]
- make xyc->iopbase point in the kernels DVMA space rather than at the
normal malloc'd KVA. this isn't compatable with sun4m [doesn't
have a kernel DVMA space] and will need to be changed later (XXX).
- move disk_attach() to before reading the disk label as per Jason.
otherwise we are reading into an unallocated buffer (oops!)
1996-01-13 03:42:40 +00:00
ca80988399
- call mapiodev() with sizeof(struct xdc) rather than ra_len (which is
...
zero since xdcmatch no longer sets it). [if you call mapiodev()
with a zero size it will reuse the KVA it returns, swiping the device
out from under you!]
- make xdc->iopbase point in the kernels DVMA space rather than at the
normal malloc'd KVA. this isn't compatable with sun4m [doesn't
have a kernel DVMA space] and will need to be changed later (XXX).
- move disk_attach() to before reading the disk label as per Jason.
otherwise we are reading into an unallocated buffer (oops!)
1996-01-13 03:35:53 +00:00
695a034ccd
change mapdev to panic if size == 0 to be safe.
1996-01-13 03:11:18 +00:00
dfbaa33f05
we handle all our mappings, so don't have obio.c do any for us
...
(i.e. don't set ra->ra_len in the match function).
1996-01-12 23:08:57 +00:00
3ef3001bec
nuke uneeded variable in match function.
1996-01-12 23:06:23 +00:00
93cc1b33e1
we no longer need to add in the offset to the mapped VA to get the correct
...
device address (bus_tmp, bus_map, and mapiodev now do this for us).
also, we handle all our mappings, so don't have obio.c do any for us
(i.e. don't set ra->ra_len in xycmatch).
1996-01-12 22:45:04 +00:00
d14b5cb80e
we no longer need to add in the offset to the mapped VA to get the correct
...
device address (bus_tmp, bus_map, and mapiodev now do this for us).
also, we handle all our mappings, so don't have obio.c do any for us
(i.e. don't set ra->ra_len in xdcmatch).
1996-01-12 22:43:55 +00:00
b5ddd8431d
dmamatch never added in the offset for the dma registers to the VA,
...
and thus probed the wrong address on the 4/300 (but it worked because
it was probing the esp0 registers!).
now that bus_tmp() adds the offset in for us [as of obio 1.19] i
discoved that a byte access to the dma registers is not allowed.
so, i've change probeget to use a word access.
1996-01-12 22:03:39 +00:00
afb262e8da
improved handling of mapping of devices who's registers do not reside on
...
page boundaries:
- change bus_tmp() to include the offset from the start of page in the
returned KVA [rather than forcing each driver to add it back in
individually]
- changed bus_map() to include the offset from the start of page in the
the returned value if a mapping is found in the PROM's KVA area
- clarified a few comments
1996-01-12 21:44:16 +00:00
c488310462
change mapdev() so that it includes the offset from the start of the
...
page in the virtual address it returns.
1996-01-12 21:22:46 +00:00
43b4486bb3
Balance calls to disk_busy() and disk_unbusy() properly to avoid
...
dk_busy < 0 panics. Count seeks.
1996-01-12 00:19:29 +00:00
f278cec042
Move bus_map() prototype here.
1996-01-11 21:55:57 +00:00
9580abeba7
Should pass suitable arguments bus_map(); as noted by Chuck.
1996-01-11 21:54:03 +00:00
7430f70694
Return `no error' after ejecting; per Jason.
1996-01-11 21:18:40 +00:00
5035080586
Correct page frame calculation after mapdev() interface change.
1996-01-11 11:19:01 +00:00
94bb8db5ad
Add shutdownhooks().
1996-01-10 23:00:33 +00:00
926f925088
Re-arrange slightly the si_options special case for the `sw'.
1996-01-09 02:36:58 +00:00
3cb556defb
Disable DMA by default on the 4/100 `sw' controller. I've had a couple
...
of reports of data corruption, and would rather be slow and safe until
the DMA bug is fixed.
1996-01-09 02:06:50 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
742cee29e5
Fix setcontext call and sendsig
1996-01-07 19:47:27 +00:00
dd9e5c93c7
Use {U,L} suffices per Charles' recommendation.
1996-01-05 18:10:57 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
d35bd4bb23
Fix a typo that would bite if the interrupt level were wildcarded in the
...
kernel config file.
1996-01-04 00:20:19 +00:00
0e8ffc850f
"si" and "sw" actually interrupt at level 3 (which I quickly discovered
...
when porting the driver).
1996-01-01 22:46:08 +00:00
33582e90e0
"si" and "sw" now have the ncr5380sbc attribute.
1996-01-01 22:44:05 +00:00
6d6c652f18
New driver for the Sun SCSI-3 VME and 4/100-series SCSI "Weird" controllers,
...
utilizing David Jones' new MI NCR 5380 code. Ported from the sun3 ncr_si.c
and "sw" DMA code written by me.
This driver contains user-configurable "options", which can be set via the
"flags" directive in the kernel configuration file. By default, only
DMA is enabled. DMA completion interrupts and reselection may be enabled
by setting the appropriate bits with "flags". See si.c for details.
Note that DMA completion interrupts and reselection don't yet work on the
4/100 controller. I don't know why, and it's unlikely that I'll have
the opportunity to find out any time soon. DMA does work, and results
in a considerable performance increase.
DMA, DMA completion interrupts, and reslection all work on my 4/260 (VME)
system with modern SCSI-II disks.
1996-01-01 22:40:56 +00:00
3a89082ff4
Make this work for GCC < 2.6.
1995-12-29 18:53:01 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
cd8fe86bcb
Make the type of __builtin_va_list a long.
1995-12-26 01:16:24 +00:00
0c00214737
Use __builtin_va_alist.
1995-12-26 00:19:09 +00:00
fa887628d8
Stylistic changes.
1995-12-25 23:15:31 +00:00
72e24c3168
Update for GCC 2.7, and fix bugs.
1995-12-25 22:24:54 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
644c68a706
Towards machine independency, per cgd: macros to access hardware registers.
1995-12-18 23:58:31 +00:00
b7feb4a35e
Enable interrupts; some ROM versions apparently turn them off.
1995-12-13 23:35:18 +00:00
524718f597
Adapt to changed mapiodev() interface.
1995-12-11 12:45:16 +00:00
d2ae46d04e
Agree with prototype.
1995-12-11 12:44:39 +00:00
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
f840d96cfe
Adapt to changed mapiodev() interface.
...
Use new DVMA routines.
1995-12-11 12:40:20 +00:00
8f162e4e25
mapdev() now takes a `struct rom_reg' argument to get access to `iospace'.
1995-12-11 12:34:36 +00:00
2b7034a493
The return of dvma_malloc/dvma_free in a different shape.
1995-12-11 12:32:56 +00:00
528ea56588
Change mapdev() and mapiodev() to take a `struct rom_reg', enabling the use
...
of IO spaces to construct device mappings.
1995-12-11 12:31:02 +00:00
51c8280df1
Prototype dvma helper functions `dvma_malloc()/dvma_free()'
1995-12-11 12:25:17 +00:00
5c50eeb245
Prevent possible race condition in ctx_alloc().
...
Remove some bogus casts.
1995-12-11 01:27:28 +00:00
7987c7fce9
Use `def_width' and `def_height' as default values when getting rom properties.
1995-12-10 22:55:32 +00:00
494a9b9eb9
Use the MI LANCE code.
1995-12-10 10:15:06 +00:00
46366f34e7
Include vm.h, rather than guessing which files we need.
1995-12-10 06:50:58 +00:00
292120bf63
Define __FORK_BRAINDAMAGE.
1995-12-09 04:41:41 +00:00
5c482e804d
Don't forget to flush the cache in vunmapbuf().
1995-12-07 22:18:54 +00:00
480398f38e
dvma_malloc => malloc/dvma_mapin. (not the most elegant solution, but it'll
...
have to do for now).
1995-12-06 22:40:22 +00:00
f6a3272e25
DVMA space is described by the variables `dvma_start' and `dvma_end'.
...
Prototype dvma_map*() routines.
1995-12-06 22:35:54 +00:00
7299c7a6c0
Have v[un]mapbuf() allocate from plain kernel map instead of dvma space.
...
Remove dvma_malloc/dvma_free; drivers should allocate kernel memory and
use dvma_mapin/dvma_mapout to double map it in DVMA space.
Make the resource map `dvmamap' responsible for all DVMA allocation.
The VM map `physmap' only serves the role of placeholder in the VM system.
1995-12-06 22:33:49 +00:00
210b4d80ec
Make pmap_prefer() also return a preferred virtual address when there's no
...
associated physical page.
1995-12-05 23:01:39 +00:00
8a1606d530
Don't return `XS_DRIVER_STUFFUP' too easily; this can hose buffer cache
...
writes. Say XS_TIMEOUT in stead so the scsi code will retry.
1995-12-01 01:00:55 +00:00
a2a4da4874
Merge changes from sun3 port; per Gordon.
1995-11-29 23:43:42 +00:00
ee08e9085b
Extend the size of the "soft" FIFOs which reportedly reduces the number
...
of FIFO overflows on high baud rates.
However, doing so on all 4 ports would cost a whopping 64KB (at 4096 entries
per FIFO) of kernel memory. So, the FIFOs are now allocated at attach time
allowing the size for the keyboard and mouse ports to be reduced (to 128)
which should be adequate for the 1200 baud they use.
1995-11-29 23:41:31 +00:00
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
6e53c6a5fd
In probe[gs]et() there's no need to check against KERNBASE, as pointed
...
out by David Jones and Chris Torek.
1995-11-29 01:52:41 +00:00
e9a919b88f
Code from Jason to better configure /dev/fb.
1995-11-29 01:45:36 +00:00
ce474272f1
Prevent synch negotiation on ESP100 chips
1995-11-28 22:49:31 +00:00
9bf3251e46
Lots of major and minor bug fixes and changes.
...
- properly do MSG_IN handshaking, so we can actually receive multi-byte msgs.
- do synch negotiation (now that the above works).
- handle disconnects.
There are a few trial-and-error bits at points where the docs I have are
particularly ambiguous about the state of chip and/or SCSI bus.
Things to do:
- more cleanup
- deal with MSG_OUT phase better
- keep some "config reg 3" bits per target (ie. FASTCLK and FASTSCSI).
1995-11-28 20:49:12 +00:00
def161af38
Careful with signed chars (caddr_t *!).
...
Merge in 1.1 changes.
1995-11-28 20:26:59 +00:00
0c031adc76
Not all v2 proms understand the `mac-address' word (from Theo).
1995-11-14 15:04:01 +00:00
c7d1d39b3e
dk_device => device in controller structure (noted by Jason Thorpe).
1995-11-11 21:12:50 +00:00
c2cd05605d
UFS => FFS conversion.
1995-11-08 09:09:20 +00:00
54ec9fb697
Correct test for sun4 machines (thanks Chuck).
...
Since uname currently does not allow to discriminate different sparc
models, we use `sysctl.hw.cpumodel' to do this somewhat heuristicly:
if the returned strings starts with "SUN4-" a sun4 architecture is
assumed. This information is used to determine whether or not to strip
the a.out header off the 1st-stage bootblocks.
1995-11-07 11:45:24 +00:00
996526aa02
Make error recovery actually work, i.e. don't hang on SCSI bus resets
...
and re-synchronize before re-scheduling pending operations.
Things seem to be a fair bit stabler now.
1995-11-03 16:47:43 +00:00
bbdb422873
Stop DMA before resetting
1995-11-03 16:34:12 +00:00
c0a156c9fd
Map pixels in VME32 space
1995-10-28 23:15:16 +00:00
e4fcc8ab5a
Move DMA chip draining to dmaintr() and drain when a (possibly partial)
...
transfer ends in stead of doing it before starting a new transfer.
Use a different CSR bit to wait for "chip not busy" (may be necessary to
make this conditional on chip revision).
1995-10-24 16:26:54 +00:00
a3f2bf19e4
Various:
...
- make esp_poll() approximate the given timeout value.
- introduce esp_abort(), and use it for timed out commands; make targets and driver less confused.
- make {free,ready,nexus}-list management somewhat more coherent.
- make sure we only proceed down the state machine in espintr()
if there really is an interrupt pending.
1995-10-24 16:03:57 +00:00
dc3c0d7db7
Define VIDEO enable bit (per Jason Thorpe; PR#1672).
1995-10-23 23:36:28 +00:00
7a9ddaff33
On-board bwtwo diddles a system enable register bit for video, per Jason
...
Thorpe (PR#1672).
1995-10-23 23:35:03 +00:00
5e55f88874
Remove `-fno-builtin'.
1995-10-22 17:36:33 +00:00
bbfd54d128
Merge from netbsd-1-1 branch: kgdb_debug_panic decl; PR1633
1995-10-18 21:54:34 +00:00
ce2afd8d64
Sync filesystem before running installboot.
1995-10-11 13:32:57 +00:00
64a90cd0b0
Check input channel in gettick(); for `L1-A' processing.
1995-10-10 20:11:33 +00:00
ebe37d8041
We don't need `rem.o'.
1995-10-10 20:07:54 +00:00
4dcb5917b8
Brr.. libkern.o is way too big for our bootxx..
1995-10-09 23:25:54 +00:00
be2f4294bf
Add `fd' to list of possible boot devices.
1995-10-09 22:34:03 +00:00
c4dc969b09
Point `bootdv' at the disk device instead of the controller (from Jason Thorpe).
1995-10-09 22:33:07 +00:00
53eb8f8175
RASTERCONS now works on sun4's too.
1995-10-09 15:39:34 +00:00
1ad1d128e3
Fill in `ascent' values correctly.
1995-10-08 19:31:44 +00:00
ecf1cf893d
Add forgotten `eeprom' configuration.
1995-10-08 11:45:39 +00:00
21a594651a
eeprom_match: account for differing physical addresses (per Jason Thorpe).
1995-10-08 11:44:59 +00:00
87a0c55d23
Patch from Jason to factor out a common framebuffer size determination
...
routine from the individual drivers.
1995-10-08 01:39:13 +00:00
c078d7a9f4
Remove __builtin_saveregs().
1995-10-07 22:27:31 +00:00
6287d3d7b2
Remove bzero().
1995-10-07 22:24:50 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
48849279bf
Script to assist installing second-stage boot programs.
1995-10-05 21:03:12 +00:00
aea329df61
rcons: rc_maxcol and rc_maxrow were swapped.
1995-10-05 13:16:57 +00:00
c8f10b184c
Do not set `ra_len' in bwtwomatch(); we only need the pixels for CONSOLE,
...
but if so, we need the lot.
1995-10-05 00:33:23 +00:00
de0c6a97bd
RCONSOLE => RASTERCONSOLE.
1995-10-05 00:26:07 +00:00
c1e313b122
include `files.rcons'.
1995-10-05 00:21:35 +00:00
b79dc038d5
Machine dependent RASTERCONSOLE font definition to be passed to rcons_init().
1995-10-05 00:02:54 +00:00
859b799130
RCONSOLE => RASTERCONSOLE
1995-10-04 23:44:33 +00:00
d19cacbb03
RCONSOLE => RASTERCONSOLE.
1995-10-04 23:35:13 +00:00
dad96c6619
Add a few constants used for mapping bit and pieces in the kernel driver.
1995-10-04 00:21:27 +00:00
32c023995c
Bring reset logic into interrupt state machine.
1995-10-03 17:32:12 +00:00
fcc53878ca
Make fbrcons_init() resistant against SUN4s.
1995-10-02 21:48:21 +00:00
cfbe993b9b
Update to use <machine/cgtworeg.h>
1995-10-02 21:44:51 +00:00
38d1101ad3
Silly me.. there's already a <machine/cgtworeg.h>
1995-10-02 21:44:22 +00:00
fb58a99a8f
Fix some bogus calls to {read/write}disklabel().
1995-10-02 21:04:45 +00:00
82434458cc
Get some of the bugs out. Thanks to David Gilbert for testing.
1995-10-02 09:07:03 +00:00
13dcbfbb29
Make this work with OBJ dirs.
1995-09-30 21:43:35 +00:00
160b38697c
Refer to installboot(8)
1995-09-30 21:33:30 +00:00
a029979ad3
Manual page for installboot(8).
1995-09-30 21:32:14 +00:00
691b9f2bfa
Avoid reading the filesystem superblock in bootxx; all info now prepared
...
by installboot (per Gordon Ross).
1995-09-27 09:03:13 +00:00
b3ecc4c310
make sure devopen() sets pd->devtype properly when BOOTXX is defined
...
(should be DT_BLOCK). otherwise the bootxx boot block will fail if
you are on a system with a v2 openprom [because it will not do the
v2_seek in obp_strategy()]. fixes the problem recently noted on
the port-sparc list by matthew green <mrg@eterna.com.au>. i tested
fix on a ss2 with a v2 prom.
1995-09-26 20:07:53 +00:00
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
25563b1f82
add config info for "xy" xylogics 450/451 driver
1995-09-25 20:27:30 +00:00
8d19642cd6
add "xy" xylogics 450/451 config stuff
1995-09-25 20:20:27 +00:00
1779adf6be
minor cleanups:
...
- don't let pcyl go unassigned if we have a non-sunos disklabel.
if nothing else, guess pcyl = ncyl + acyl.
- don't use bogus disklabel data if disk label is invalid
(xdgetdisklabel() now returns if label was ok or not).
- move xddriver decl. before start of actual code (cleanup).
1995-09-25 20:12:44 +00:00
2aff99a206
bug fix: xddummystrat() was clearing all but B_BUSY when it should
...
have been clearing just B_BUSY (s/B_BUSY/~B_BUSY/). this
fixes hard hang when reading disklabel when booting system.
minor clean up: added a few prototypes and only fool with bootpath
if booting the system (in xdattach).
1995-09-25 16:02:09 +00:00
825bd034de
Move pseudo swap block device to major 4 to make way for `xy'.
1995-09-24 20:45:27 +00:00
4408ec71bf
init bad144 table before we actually try and read anything from the
...
disk, rather than init'ing after reading block 0 [in case we get an
error reading block zero].
1995-09-24 00:27:59 +00:00
b903d705da
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:26:58 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
c030fa6ef2
Install in /usr/mdec
1995-09-18 23:33:42 +00:00
aa41c30406
Don't strip bootxx on installation.
1995-09-18 23:32:41 +00:00
4025edc861
Make this compile again by calling readdisklabel() with a dummy strategy routine.
...
XXX - need some reorganization to this from xdopen().
1995-09-18 23:26:39 +00:00
371dd67d56
sync filesystems just prior to writing the bootblocks to the raw device.
1995-09-18 22:36:19 +00:00
974115eb54
Adapt to libsa changes & some other minor nits.
1995-09-18 21:31:44 +00:00
05f929580f
read superblock into &sblock rather than LOADADDR. we can't read
...
into LOADADDR because it can't be mapped into DVMA space. this fixes
a dvma panic on a sun4 boot from an xd disk.
1995-09-18 20:24:53 +00:00
24ba08adca
Fixed RELOC's to be hex numbers (as expected) rather than decimal.
...
(e.g. s/340000/0x340000/). Fixes DVMA panic on my sun-4/280 when
booted diskless.
1995-09-18 19:52:15 +00:00
f447526366
vmes => vmes0
1995-09-17 21:11:13 +00:00
11f1ea06af
These files have moved to sys/dev/rcons.
1995-09-17 21:08:25 +00:00
2c523b5941
Remove rcons lines.
...
Add cgtwo.
1995-09-17 21:03:36 +00:00
30150218f5
Add cgtwo0.
1995-09-17 21:02:56 +00:00
c5bc107461
cgtwo framebuffer, cloned from cgthree.c and sun3's cg2.c.
...
Note: untested, shall be considered a framework to get things started..
1995-09-17 20:53:43 +00:00
c92d076f5b
Change interface to th `fb' pseudo device to not need the major device
...
number (a la sun3).
Put in new glue for rcons.
1995-09-17 20:43:39 +00:00
b89096d14f
Remove all rcons related stuff from `fbdevice'; this is now defined in
...
dev/rcons/rcons.h.
1995-09-17 20:41:30 +00:00
a32163f292
Correct some prototypes.
1995-09-17 00:50:54 +00:00
f97c30e5fe
Network booting; "oldmon" support; combine all functionality in single images.
...
Many thanks to Gordon Ross and Chuck Cranor for figuring out and testing
the old monitor (sun4) stuff.
1995-09-16 23:20:22 +00:00
db43cabe32
Re-instate configuration print routines, following Chris' suggestion.
...
Only prints something if there's no scsi bus to attach.
1995-09-14 20:38:53 +00:00
851669ceab
cleaned up bootpath code:
...
- v2 openprom disk boot generates "/sbus/esp/sd@3,0" which we translated
into "/sbus@0,0/esp@0,0/sd@3,0"... this caused esp.c to reject
the bootpath because it was looking for sbus slot/offset 0,0.
changed the code to generate "/sbus0/esp0/sd@3,0" to fix this
panic.
- when generating fake boot paths, generate them with unit numbers
rather than slot/offsets (thus, /obio@0,0 becomes /obio0, as
does vmel and vmes).
- fixed up comments to reflect these changes
tested new code on: 4/280 (diskless), 4/360 (diskless), 4/360 ("xd" disk),
4/370 (scsi disk), ss1 w/v1 openprom (diskless),
ss1 w/v1 openprom (scsi disk), ss2 w/v2 openprom (diskless),
ss2 w/v2 openprom (scsi disk).
1995-09-12 22:03:02 +00:00
9d7c17bfcb
We have no need for `esp_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there. Returning -1 is an error
anyway as noted by Chuck Cranor.
1995-09-11 19:41:21 +00:00
0a5ab32e3d
We have no need for `si_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there.
1995-09-11 19:35:06 +00:00
5bf0d8e4fa
`si' and `sw' are scsibusses.
1995-09-11 19:20:12 +00:00
bac2393fb0
Probe config registers correctly.
1995-09-06 12:35:38 +00:00
896097d846
Fix `le' faked bootpath (PR#1438, Rolf Grossmann).
1995-09-05 21:46:04 +00:00
60a7c4c394
Add `sw' scsi adapter on obio (per Jason Thorpe, PR#1422).
1995-09-05 21:43:09 +00:00
b04e172458
Rename a `xxx' function.
1995-09-04 09:53:53 +00:00
003751356c
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422). Also includes
...
bootpath glue (PR#1414) (this needs finishing off in disksubr.c).
1995-09-03 22:21:27 +00:00
8bdbf4be70
Update from Jason: eeprom device needs 8-bit access.
1995-09-03 21:55:36 +00:00
af6e3d03cf
Add data structures used to interface to the monitor-resident drivers.
1995-09-03 21:36:06 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
9b3308eeec
Enable writing of disklabels (Many thanks to Jason Thorpe, Gordon Ross
...
and Matthew Green).
1995-09-01 17:19:50 +00:00
b1ae3d7339
Garbage collect.
1995-08-29 23:09:29 +00:00
7a84d590e0
Add bwtwo@obio specs (from Jason Thorpe).
1995-08-29 22:50:36 +00:00
bc5b188714
Define bwtwo at obio & vme (from Jason Thorpe).
1995-08-29 22:28:07 +00:00
a4e214aef0
If we're the console, say so in attach message.
1995-08-29 22:26:37 +00:00
a159e45699
Support for sun4 (from Jason Thorpe).
1995-08-29 22:20:01 +00:00
15c28bc39a
Sun4s must set baud rate on the mouse port (from Jason Thorpe).
1995-08-29 22:15:35 +00:00
f9777fe9ef
Export `eeprom_va' (from Jason Thorpe).
1995-08-29 22:13:19 +00:00
6f1f25d6ed
Export `eeprom_va' so drivers can peek at the configuration (from Jason Thorpe).
1995-08-29 22:11:58 +00:00
4bdcdaa4e3
define reserved bits in cfg2 & cfg3 registers correctly.
1995-08-29 20:05:22 +00:00
7e13adf019
Check for absent boot device where it matters.
1995-08-29 19:59:49 +00:00
bd12f97e97
Avoid NULL dereference
1995-08-29 19:53:59 +00:00
70c3710dfd
minor tweaks from Matthew Green (PR#1410)
1995-08-27 18:58:48 +00:00
a3bb091c9e
Do bootpath matching.
1995-08-18 22:03:59 +00:00
f5252faa3b
Include exec header in length computation.
1995-08-18 21:44:01 +00:00
8427fe6126
declarations
1995-08-18 10:47:46 +00:00
7b7773a0c5
Use bootpath_store() to set next boot component; used in dk_establish()
...
to match `sd' devices against the PROM's boot path.
Detect DMA "overshoots" when handling odd-sized transfer sizes (e.g., xfers
from/to raw partitions), by using the "Transfer Pad" command when the
transfer count reaches zero.
1995-08-18 10:43:46 +00:00
ffbae23b6e
Set `bootdv' if booted from the floppy drive.
1995-08-18 10:30:16 +00:00
f828a4b04c
Add a debug flag.
...
Make `sc_dleft' a `ssize_t' since it's involved in a signed
comparison in esp.c.
1995-08-18 10:09:57 +00:00
0596f75779
Use actual bus names (matches Chuck's bootpath code).
1995-08-18 08:20:26 +00:00
6d3873af7e
Bootpath construction code and associated SCSI target mapping to aid
...
the search for the boot-device in `swap generic' kernels.
From Chuck, munched by me.
1995-08-18 08:14:28 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
42802ac2fa
Drop si_minphys().
1995-08-16 23:01:16 +00:00
de80daa3cd
Make MCOUNT() PIC-safe.
1995-08-14 15:44:36 +00:00
0a601c87ba
Rename two functions.
1995-08-14 02:13:42 +00:00
1e69f23205
Export bsd_to_svr4_sig[], and use it.
1995-08-14 02:07:57 +00:00
9440382c88
svr4_stack_t --> svr4_sigaltstack
1995-08-14 01:13:29 +00:00
7eba547264
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:29:56 +00:00
ced95e1824
update from Chuck
1995-08-01 21:06:55 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00
cdbe7b1bc5
Have esp_minphys limit transfers to MAXPHYS bytes.
1995-07-13 12:45:22 +00:00
05daa72b3c
Move SUN4 console echo hack cnget() (from Chuck Cranor).
1995-07-13 12:02:19 +00:00
f72d54fa88
Zap duplicate RCS id.
1995-07-12 05:47:47 +00:00
8274dc04d1
si scsi driver configs.
1995-07-08 21:33:48 +00:00
89cb640a97
si scsi driver, adapted from sun3 version by Jason Thorpe.
...
Note: re-arranged to use dev/ic/ncr5380* MI files.
1995-07-08 21:32:47 +00:00
576bc844e5
Support KIOC_GETLAYOUT, so other than US keyboards can be dealt with better.
1995-07-06 05:35:34 +00:00
12bdf1b787
KNFify a bit.
1995-07-05 19:55:02 +00:00
41d3ba8d49
Commit to MACHINE_NONCONTIG.
1995-07-05 18:52:32 +00:00
b8065a4244
remove a db_printf() that has been there for too long.
1995-07-05 18:51:41 +00:00
10a0b4b79e
Prototype pmap_dumpsize() and pmap_dumpmmu().
1995-07-05 18:45:46 +00:00
a796c37169
Re-arrange dumpconf() and dumpsys().
1995-07-05 18:40:50 +00:00
b34c403839
#define MACHINE_NONCONTIG here, so all vm_*.c files see it timely.
1995-07-05 18:04:48 +00:00
50755a7cc5
typos.
1995-07-05 17:53:41 +00:00
8a8842dc58
remove __BDEVSW_DUMP_OLD_TYPE
...
#include <sys/cdefs.h>.
1995-07-05 17:46:11 +00:00
337522fb97
Move dumpmmu() over here.
1995-07-05 16:35:42 +00:00
c39b37a262
xd declarations.
1995-07-05 15:53:22 +00:00
9013a7a6e2
Add xxread/xxwrite.
1995-07-05 13:34:10 +00:00
deb17b0f15
make this compile better....
1995-07-05 13:06:33 +00:00
38f1964478
Fix bug in the KGDB trap definition. Add svr4 software traps.
1995-07-04 22:58:51 +00:00
1fc6525f9b
trap.c: Add svr4 software traps. Fix bug in errno mapping.
...
svr4_machdep.c: Add siginfo translation (from mrg), add some software traps.
1995-07-04 22:57:33 +00:00
374a7cc9cb
Add code to soft01intr to call pppintr.
1995-07-04 12:34:37 +00:00
63eeefb6cd
make this compile better.
1995-07-04 10:29:22 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
e7dcefc56c
Add the svr4 network cloning devices. Now telnet(1) works too. There are
...
still problems with X-windows programs.
1995-07-02 06:13:27 +00:00
45d46cb0c9
svr4_machdep.c: Fix {get,set}context and sendsig.
...
locore.s: add signal trampoline code for svr4. There is a lot of code
duplication there. Maybe we should share the code?
SVR4 status now:
/bin/sh: works
/bin/ls: works
/bin/sleep: works
/bin/csh: gives unknown software trap 0xa7
/bin/ldd: works
1995-07-01 23:55:31 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
c83f9c5568
remove unused cpu_exec() definitions. moved "broken swap" markers, for
...
ports that still need it, to types.h.
1995-06-28 02:55:18 +00:00
d4a54b73d2
kill user-land DELAY macro, as suggested by gwr.
1995-06-28 02:43:36 +00:00
09ea33db05
Do away with ROM printf.
1995-06-26 23:45:06 +00:00
a50ba2b546
Adapt to new lib{sa,kern} regime.
1995-06-26 23:26:57 +00:00
c7df493055
SMD disk driver, from Chuck Cranor.
1995-06-26 23:06:57 +00:00
70b6d95d44
xd definitions, from Chuck Cranor.
1995-06-26 23:01:06 +00:00
35ad7a1ff3
xd driver entries, from Chuck Cranor.
1995-06-26 23:00:32 +00:00
4f4e4826a6
xd definitions, from Chuck Cranor.
1995-06-26 23:00:31 +00:00
d918ea9e14
xd driver entries, from Chuck Cranor.
1995-06-26 22:59:54 +00:00
3c17e9e63f
isbad(), for Chuck's new xd driver.
1995-06-26 22:57:29 +00:00
34c8ad8c30
Define dvma_map{in,out}() to map a buffer into DVMA space. These are
...
safe for use at interrupt time.
Implement vmapbuf() and vunmapbuf() in terms of these new functions.
1995-06-26 22:46:04 +00:00
68e9c36909
Allocate/initialise DVMA maps and base address.
...
The fact that `phys_map' is split in half for different kinds of DVMA
allocations is not ideal..
1995-06-26 22:41:23 +00:00
affbc4d346
Define variables and macros for DVMA allocation using rmaps.
1995-06-26 22:36:32 +00:00
04977f87e0
sl_xxx2 -> sl_pcylinder, for Chucks new xd driver.
1995-06-26 22:09:47 +00:00
47ce042b76
Small optimisation & 1 fewer depedency on zs_ctty.
1995-06-26 21:45:31 +00:00
45eb69b276
Use ZS_DELAY() in a few more places (from Gordon Ross, cf. sun3/dev/zs.c).
1995-06-26 21:32:51 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
2321aeb62a
Reserve arguments 2-4 for SunOS loaders; pass DDB stuff in args 5 and 6.
1995-06-25 23:26:21 +00:00
008504e597
Define IO-cache bit for sun 4/400 machines.
1995-06-25 23:15:58 +00:00
95733d9732
add a couple more sun4m bits.
1995-06-25 21:34:28 +00:00
a5c53e5068
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
1995-06-24 20:47:36 +00:00
dbc54ab48e
For a mmu3/sun4 too, it will suffice to just map the first 16MB.
1995-06-24 20:42:59 +00:00
20d86b44f2
Assume kernel is < 16MB in size,
...
Massage the a few control bits before remapping (from David S. Miller).
1995-06-23 15:44:34 +00:00
ad8e3ed225
Sync with net/if.h
1995-06-23 13:19:44 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
1d65cdd4ab
#include <sys/cdefs.h>.
...
Wrap __flt_rounds() declaration with __BEGIN_DECLS/__END_DECLS.
1995-06-20 20:32:22 +00:00
8f62c773e8
don't assume the f_fsnamelen is nul-truncated or longer than MFSNAMELEN
1995-06-18 14:45:14 +00:00
c049178b03
Deal with unrecovered boot devices.
1995-06-10 21:48:29 +00:00
bf834e228d
Add UNION option.
1995-06-05 12:46:31 +00:00
c86cba88fe
Update SCSI decls.
1995-06-02 17:53:51 +00:00
c0c45bba22
Try to recover from multi-byte messages sent by a target for which we
...
get an "Illegal command" (why is this?) when we try to pull it in.
On detection of this condition, we reset the SCSI bus and simply stop asking
this target for an identify messages, for now.
1995-06-02 15:46:47 +00:00
4770e5e7c5
Try to recover from multi-byte messages sent by a target for which we
...
get an "Illegal command" (why is this?) when we try to pull it in.
On detection of this condition, we reset the SCSI bus and simply stop asking
this target for an identify messages, for now.
1995-06-02 13:43:30 +00:00
8066369f08
Deal with v.3 proms (sigh).
1995-06-01 14:36:17 +00:00
ff6265b288
Remove useless msgbufmapped definition.
...
Two cases of incorrect addressing while not mapped at KERNBASE.
Some more sun4m stuff.
1995-05-30 20:29:42 +00:00
95fcffe527
eeprom device for Sun4 from Jason Thorpe.
1995-05-29 23:56:27 +00:00
555da07c0f
eeprom device (from Jason Thorpe).
1995-05-29 23:53:50 +00:00
06ffffda03
Propagate bootpaths
1995-05-27 08:12:51 +00:00
92414dd1c7
Use a different method to discriminate a 82077 from a 82072 (from Chris Torek);
...
using the NE7CMD_VERSION command is too unreliable.
1995-05-20 20:03:37 +00:00
c3d5b45b6e
Name fd register structures more appropriately.
1995-05-20 19:59:52 +00:00
b4cf60ac8a
cpu_swapout() not needed after all.
1995-05-19 06:57:41 +00:00
mrg