Commit Graph

117 Commits

Author SHA1 Message Date
mjacob
5babd2b8c9 get back to looking at config flags 1999-12-20 00:49:58 +00:00
mjacob
e6da5abb16 Add back in inclusion of microcode and rationalize it. request/response
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
pk
d5a471ccc9 Check presence of Sbus interrupt properties before using them.
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
thorpej
4bdf6bd731 Call mii_down() as appropriate. 1999-11-12 18:14:17 +00:00
pk
23c39b410d Fix some diagnostic output with a patch from Jonathan O'Brien. 1999-11-05 19:00:44 +00:00
mrg
bd0928e723 find "SUNW,hme" as well as "hme". this matches the onboard
ultra2 hme.  haven't actually tested this beyond it probing
because my scsibus is hanging.  anyway, it reports:

hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
thorpej
ca9b9a3b2e Adapt to mii_phy_probe() change. 1999-11-04 00:24:00 +00:00
mjacob
44c603dd7b Remove reference to loadable f/w. 1999-10-28 16:11:19 +00:00
mjacob
6bbb170768 We alloc xflist and dma maps in mailbox setup. We swizzle endian stuff
at the end of dma setup.
1999-10-14 02:16:04 +00:00
thorpej
63b8530b4e Update for SCSPI changes. 1999-09-30 23:04:39 +00:00
thorpej
7b3258b6a7 Make the kthread API a bit more friendly to loadable kernel modules. 1999-07-06 21:44:09 +00:00
pk
a7e4d3ac4d Add the Sbus front-end for the HME driver. 1999-06-27 12:47:52 +00:00
pk
4f2e48c4d2 Don't turn on the engine too early.
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
pk
9335333dee Issue a reset command when initializing. 1999-06-24 19:56:51 +00:00
mrg
67cbdf5623 split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different. 1999-06-05 14:29:10 +00:00
pk
61e5d73035 Fix bus_size_t/size_t/int confusion. 1999-05-27 14:22:28 +00:00
thorpej
f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
mrg
f5af676456 white space. 1999-05-16 14:47:52 +00:00
pk
569836a986 It is no longer necessary to protect bus_dma_[un]load() at splbio, since
sparc bus_dma*() functions now protect their own internals..
1999-04-25 10:40:53 +00:00
pk
52db3a158e Correct QESTAT `%b' format string. 1999-04-20 20:24:39 +00:00
pk
401d03761f Initialize automatics in stp4020print(); noticed by Jonathan O'Brien. 1999-03-29 21:30:48 +00:00
cjs
5ecfcfbb96 Make `sun4m DMA not supported yet' message print only for this device,
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
mjacob
d8aa229a12 roll internal release tag 1999-03-26 22:45:17 +00:00
mjacob
3cafeadabd Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
pk
54ae4d24b8 Call bus_dma_[un]load() at splbio. 1999-03-23 00:38:15 +00:00
pk
d86e93c62a Fix promiscuous modes - patches from Jason Wright. 1999-03-23 00:27:09 +00:00
eeh
b71ea6aad4 Use correctly bus_space_*() macros to access device registers. 1999-03-19 02:32:48 +00:00
mjacob
c312dfb410 prototype 1080/1240 support caused register offset rewhack 1999-03-17 06:17:16 +00:00
mrg
fbda6bed6d make this compile on SUN4U. XXX icky, reader beware. 1999-03-09 00:42:20 +00:00
pk
87ae97e3f0 Fix what is probably a past-o. 1999-02-28 17:01:49 +00:00
pk
5c062abb64 Fix the bus print function. 1999-02-27 22:21:13 +00:00
pk
331694119a Our device name differs from the PROMs node name. 1999-02-27 13:17:08 +00:00
pk
c6c74098d0 Don't try to use the MII routines for the internal PHY. 1999-02-19 14:57:00 +00:00
mycroft
71105fbda7 Update comments. 1999-02-17 21:44:55 +00:00
mycroft
e5f5e628d2 Pass the direction to the allocm and round_buffersize methods.
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
mjacob
1a911bb798 roll internal release level 1999-02-09 00:54:07 +00:00
mrg
4553ce553c use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h> 1999-02-03 06:03:37 +00:00
mjacob
5c5ac2958f roll internal release tag and finally use bus_space I/O 1999-01-30 07:10:38 +00:00
pk
2fa7bdbccd Fix AF_NS code. 1999-01-18 13:29:01 +00:00
pk
fb846bde24 Share ring buffer code and data structure for be' and qe' in
the QEC module. Adapt the QEC interrupt establish code to suit the
needs of the `qe' device.
1999-01-17 20:47:50 +00:00
pk
ad3176f350 Add `qe' network interface device. 1999-01-17 20:44:58 +00:00
pk
5e8fcd9428 Import Jason Wright's Sbus Quad ethernet (`qe') driver as found in OpenBSD.
Heavily pounded on by me to make it fit our driver model.
Also added: auto media selection; shared ring buffer code with `be'.
1999-01-17 20:44:18 +00:00
pk
6d1f55bc7a Initial revision 1999-01-16 13:19:11 +00:00
pk
c830c88dd2 Convert to bus_space(9).
Add buffer allocations needed by the be driver.
1999-01-16 12:46:08 +00:00
pk
e0e761e420 Import Jason Wright's Bigmac driver, written for OpenBSD.
Heavily pounded on by me to make it fit our driver model.
1999-01-16 12:43:09 +00:00
kleink
a9b05361c1 Avoid arithmetic on void *. 1999-01-12 02:28:55 +00:00
mjacob
e618c0c7d7 turn on SBUS bursts 1999-01-10 06:22:12 +00:00
mjacob
d6cab14b00 clean up headers 1998-12-28 19:12:26 +00:00
pk
bb12def997 Use `pcmciabus' to attach the Sbus to PCMCIA bridge. 1998-11-26 15:33:29 +00:00
pk
2814b02ec8 Define STP4020 chipset driver by its nickname `nell'.
XXX - also define a `pcic' attribute here, so we can attach a pcmcia bus
1998-11-22 22:17:27 +00:00