thorpej
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
thorpej
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
thorpej
83f9ab3c87
Implement asynchronous autonegotiation when driven by the MII tick
...
(one-second clock). Prevents .5s delays every 5 seconds when the interface
is up but there is no link. Fixes PR 7361.
1999-04-23 04:24:32 +00:00
thorpej
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
thorpej
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
thorpej
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
thorpej
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
thorpej
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
thorpej
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
thorpej
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
thorpej
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
thorpej
981f0cd0d0
If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
...
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
thorpej
a24f6f77bf
Ugh, don't print out "autonegotiation failed to complete" if it did.
...
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
thorpej
e8e237ffc6
Device driver for the Quality Semiconductor QS6612 PHY, found in
...
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
