Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
58,504 Commits 606 Branches 0 Tags 3.1 GiB
655a7bf795
Commit Graph

121 Commits

Author SHA1 Message Date
kleink
56060556e3 Report all AUDIO_PROP_* properties when attaching an audio device. 1999-12-15 12:09:34 +00:00
augustss
2e175b3f88 Avoid 0 blocksize. 1999-11-23 08:38:30 +00:00
augustss
3ea93b7669 Make sure to call vdevgone() on all devices when deteching. 1999-11-09 16:50:47 +00:00
augustss
fb4a4525a8 Be cautious about the blocksize returned by the hardware driver to 
avoid division by 0.
 1999-11-01 18:06:36 +00:00
kleink
9dfb5a91ec Minor output formatting buglet. 1999-09-23 11:53:13 +00:00
augustss
a85a08c2fb Add support for detaching audio devices. 1999-09-09 10:24:39 +00:00
thorpej
12006f3c05 Don't clobber the error returned by uiomove() when starting the audio 
output (in case we got a partial block).  Fixes PR #7722, from
Antti Kantee <pooka@iki.fi>.
 1999-06-07 19:24:38 +00:00
nathanw
9e14ee3c6e Fix two small bugs: 
(1) Fix sense of a strcmp() test so that the monitor subdevice of the
    mixer is properly identified.
(2) Use hw_if->set_port() instead of hw_if->get_port() when changinh
    the monitor level in audiosetinfo().

Fixes PR kern/7661.
 1999-05-30 00:21:08 +00:00
nathanw
ea0550413c Make these compile on the alpha when AUDIO_DEBUG is defined. 1999-02-26 01:18:09 +00:00
mycroft
35399992bb Indicate whether the decive is full or half duplex at attach time. 1999-02-19 17:09:16 +00:00
mycroft
e5f5e628d2 Pass the direction to the allocm and round_buffersize methods. 
Some drivers need this to properly allocate DMAable memory.
 1999-02-17 02:37:38 +00:00
augustss
33f1482ece Make sure recording is started before we return EWOULDBLOCK in a read(). 1998-12-27 23:25:32 +00:00
augustss
496387c419 Fold lines to 80 chars. 1998-12-27 22:52:23 +00:00
drochner
6292c7eda0 Make midi_attach_mi() and audioprint() available also if MIDIBUS 
(but not necessarily MIDI) is defined.
Fixes PR port-i386/6615 (Krister Walfridsson <cato@ulysses.df.lth.se>).
(XXX this should probably go into a separate file to get rid of
the #ifdef mess)
 1998-12-20 14:26:44 +00:00
mycroft
53698488ff Do not permit a class to be recorded as a master or monitor port. 1998-11-25 13:44:13 +00:00
mrg
db3051d720 fix problems in many d_mmap routines: 
- returned EOPNOTSUPP rather than -1.
	- no check for negative offset.
many of these fix potential security problems in these drivers.


XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
	paddr_t (*d_mmap) __P((dev_t, off_t, int));

by someone!
 1998-11-19 15:38:20 +00:00
christos
b12bfa760e Make this compile again with no audio but with midi devices. 1998-09-27 16:43:56 +00:00
mycroft
b742b9ad67 Move some debugging output to more useful levels. 1998-09-01 07:27:06 +00:00
pk
535cdbe9f2 Slight optimization in audio_[pr]int(). 1998-08-28 12:07:41 +00:00
augustss
c50af72c34 Handle the case of MIDI devices with no audio devices. 1998-08-28 07:44:12 +00:00
thorpej
1083dcb6ca Back out previous. 1998-08-18 18:16:30 +00:00
thorpej
73d1752963 Deal with somewhat bogus uninitialized warning in new egcs. Behavior 
is such that would inidicate that __attribute__((__noreturn__)) is not
being honored.
 1998-08-18 06:16:45 +00:00
augustss
cd09067eb4 * Redo the way the way the MIDI driver attaches to audio devices. 
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
  The opl driver is not finished yet; it sounds pretty awful.

For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
 1998-08-17 21:16:09 +00:00
mycroft
20ec08b84e Oops. 1998-08-10 01:17:33 +00:00
mycroft
10148394d2 Call set_params if usemode changes. 1998-08-10 01:13:20 +00:00
mycroft
17431823fb Add trigger_output and trigger_input entry points, which replace 
init_{in,out}put and start_{in,out}put, and are only called once.
 1998-08-09 20:28:07 +00:00
mycroft
a2fc689833 Make sure output is thoroughly halted on close, and remember that we stopped 
it.
 1998-08-09 07:25:58 +00:00
mycroft
9bedf069cd Mask off extra usemode bits. 1998-08-09 05:44:51 +00:00
mycroft
b3853549b3 Always copy back both the record and play parameters, in case the driver had 
to change one behind our back.
 1998-08-09 04:54:44 +00:00
augustss
48bae9ee88 Add MIDI support. The MIDI devices can be accessed as ``raw'' through 
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
 1998-08-07 00:00:55 +00:00
augustss
28e2d6024a Clarify a comment. 1998-08-05 16:38:09 +00:00
augustss
5b057ab09f Allow option AUDIO_INTR_TIME even if the platform does not support 
FP in the kernel.
 1998-08-04 11:26:14 +00:00
mycroft
f37f08c48e This doesn't need opt_compat_netbsd.h any more. 1998-07-09 09:27:33 +00:00
mycroft
401accfd7a Don't #ifdef the encoding compatibility crud. It's needed for source 
compatibility with other systems and much third party software.
 1998-07-09 02:45:45 +00:00
jonathan
d275e56dee * defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID. 
TODO: revisit interaction between native compat and emul compat usage.
 1998-07-05 08:49:30 +00:00
augustss
54281b8662 Avoid spaces in tsleep() string. 1998-05-18 18:27:43 +00:00
augustss
88edb37522 Be more verbose if attaching the audio device fails. 1998-05-15 15:45:58 +00:00
augustss
df71a424d6 Change debug printing a littel again. 1998-04-28 23:19:20 +00:00
augustss
127acabd9c Add a few more debug messages and clean up debug printing a little. 1998-04-28 09:07:12 +00:00
augustss
44c6ce78d2 Avoid the name free so the MALLOCLOG option works again. 
Fix some typos.
 1998-03-03 09:16:15 +00:00
thorpej
43ba4e27bd Adjust for config changes. 1998-01-12 08:44:08 +00:00
augustss
a908b2b30e Fix three problems spotted by mycroft: 
- Closing the audio device should stop recording.
- Manipulating the pause function could accidentally start playing or recording.
- AUDIO_FLUSH could accidentally start playing or recording.
 1997-12-03 01:01:19 +00:00
augustss
b366d54e2e Fix slight glitch in last commit when AUDIO_DEBUG is on. 1997-10-29 02:11:45 +00:00
augustss
9f84e63746 Do audio attachment the right way. From Chris Demetriou. 
(Maybe I'll get the hang of the configuration stuff one of these days. :-)
 1997-10-29 02:00:20 +00:00
augustss
e7029fc0da Make the audio API (almost) SunOS compatible. 
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
 1997-10-19 07:41:33 +00:00
is
25ea46120a TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. 
No optionboards yet for Melody, only audio driver.
MPEG data types for audio.c
 1997-10-16 23:57:56 +00:00
augustss
31ab81c6e4 Aignore interrupts if the device isn't open. 1997-10-16 16:41:18 +00:00
augustss
0d79fbe5c5 Don't test for unused methods. 1997-10-14 18:43:42 +00:00
mycroft
3cdff9d435 GETPROPS does not indicate whether the device is currently in full-duplex 
mode.  Reinstate GETFD to return this information.
 1997-10-11 11:16:28 +00:00
augustss
4f2068ec29 Sanity check hi/lo water mark settings better. 1997-10-07 22:40:43 +00:00