d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
3c8e65b670
Oops. macppc doesn't use PCLK as a baud rate source.
1999-03-23 18:07:19 +00:00
d446fb449c
exterminate ovbcopy. patches provided by Erik Bertelsen, pr-7145
1999-03-12 22:42:30 +00:00
c8117990ae
Use 6x11 font if screen size is smaller than 1024x768.
...
(Open Firmware ROM has 6x11 font.)
1999-02-19 14:02:33 +00:00
da71ba4292
First step of MESH SCSI support.
...
XXX no disconnect/reselect.
XXX sync transfer is very unstable.
1999-02-19 13:06:03 +00:00
60307f0ef1
Sync with mac68k.
1999-02-17 14:56:56 +00:00
2a304686e6
Minor cleanup.
...
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
1999-02-11 15:28:03 +00:00
d1276ebc65
Make this compile. (and sync with dev/ic completely)
1999-02-06 20:04:31 +00:00
be1af660c0
Don't set DCD_IE in the frontends. KGDB doesn't even use DCD, and the tty
...
frontends get it from zsparam() anyway.
1999-02-03 20:25:05 +00:00
54f0a0ae81
Clone changes from the version in dev/ic. (These should be merged!)
...
Note: NOT tested on this port yet.
1999-02-03 20:19:08 +00:00
68c9ce2c96
Don't use BAT register. (not needed now.)
1999-02-02 16:48:17 +00:00
438b781c46
Match "ata0".
1999-01-22 10:44:38 +00:00
321f772d99
Invert Y axis (like ums, pms, ...).
1999-01-18 12:36:36 +00:00
12d2afa11a
Use KS_KEYCODE macro.
1999-01-13 08:13:41 +00:00
90a73bba2c
Always use polling when poweroff/restart.
1999-01-12 10:38:00 +00:00
35eeb3f1cd
remove dummy "load_font" entries
1999-01-11 21:54:22 +00:00
8190b5f43f
Add sanity checks in akbd_cnattach().
1999-01-10 10:39:13 +00:00
13529d1878
bmac ethernet driver. (tested on iMac. only 10Base-T works.)
1999-01-01 01:27:52 +00:00
8a5e34f28a
Fix a bug of last change.
1998-12-29 05:17:27 +00:00
e7e9a2e0e1
Use "interrupt" property if "AAPL,interrupt" is not found.
1998-12-28 00:38:18 +00:00
86a0b96c10
Search "interrupts" property if "AAPL,interrupts" is not found.
1998-12-22 19:46:28 +00:00
89e0cc0a86
Display frame buffer type when attached.
1998-12-22 19:38:35 +00:00
ef27ffc3de
Add ata/atapi disk support.
1998-12-10 20:10:03 +00:00
ea6bba6b90
Fix a typo.
1998-12-07 17:17:14 +00:00
f917584d54
Add more delay in adb_reinit().
1998-11-24 08:26:50 +00:00
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
099f099133
Don't send mouse events to wsmouse layer if wsmouse isn't configured.
1998-11-18 09:11:34 +00:00
7c939afccf
RTC support for pmu (read only).
1998-11-15 19:41:33 +00:00
1bf603b543
Sync to mac68k.
1998-11-05 11:46:07 +00:00
8634976fb2
Move conversion of PRAM-time to UNIX-time to clock.c (like mac68k).
1998-11-04 15:06:13 +00:00
0b3665db48
Add "Paddington" ID.
1998-11-03 12:15:57 +00:00
330d14c254
Oops, forgot to add them.
1998-10-20 14:59:16 +00:00
6f402eb495
Add via-pmu support (only PowerBook 2400c/180 is tested).
1998-10-20 14:56:30 +00:00
07e2c44982
Make compilable without aed.
1998-10-18 09:52:16 +00:00
541bc2d3d7
Add wsmouse support.
1998-10-18 09:31:40 +00:00
3b892dd579
/chaos/control support. (tested 640x480 mode only)
1998-10-15 14:48:47 +00:00
635d4ae57a
Fix typo.
1998-10-14 13:21:10 +00:00
c539169765
wskbd support.
1998-10-14 12:56:19 +00:00
b6e7cc68c6
akbd: wskbd support.
...
ofb: OpenFirmware generic framebuffer.
1998-10-14 12:15:10 +00:00
7d9356dcca
Fix cut-and-paste miss...
1998-10-13 13:15:29 +00:00
7756c05cc4
Split ADB driver to aed (ADB event device), akbd (ADB keyboard),
...
and ams (ADB mouse). adb is a bus now. (from Colin Wood)
1998-10-13 11:21:20 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
eefa9491d1
Turn on support for 115,200 and 230,400 baud. Should work, but might
...
generate lots of interupts (one per char or so) if we don't have
DMA set up.
1998-09-09 20:58:06 +00:00
29bae173fa
Relinquish my copyright claims on this file.
1998-09-05 15:29:35 +00:00
99c8212d10
Change void mcintr() to int mcintr().
1998-09-03 14:06:06 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
1c3e72cd0e
Back out previous change.
1998-08-26 11:44:06 +00:00
d4d7416198
vm_offset_t --> [pv]addr_t.
1998-08-21 16:13:28 +00:00
573f3aee5c
Enable 115200 and (untested)230400 bps.
1998-08-16 11:24:36 +00:00
mrg