7777f61cbe
Rearrange for script changes (scheduler core in main script, command part
...
of the scheduler in command table).
Add tagged command queuing support.
2000-10-23 14:56:16 +00:00
644aa13a51
Fixed the value of TULIPF_DBO; which was accidentaly shared with the same
...
value of TULIPF_BLE. Pointed out by Enami-san.
2000-10-23 04:05:21 +00:00
2ebf1a0cd0
Ops, sync the script DMA map when the script RAM *don't* exists.
2000-10-21 13:56:17 +00:00
e999ecae48
Support ETHERCAP_VLAN_MTU. Tested on a sparc 2 with:
...
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 00:00:3b:86:19:92
le0: 8 receive buffers, 2 transmit buffers
2000-10-20 09:40:26 +00:00
0c6aa8d3ed
ensure DMA mappings are not mapped streamable. fixes ethernet problems on
...
ultrasparc sbus class machines. from eeh.
2000-10-20 06:08:02 +00:00
67fe5fbbb4
Update for lsu; untested.
2000-10-19 14:28:46 +00:00
d239df5374
Adapt for script change: don't assume Ent_lun_switch_entry == 0
2000-10-19 07:22:06 +00:00
f629a0ae67
Ops, add proper bus_dmamap_sync() calls for reselect switch operations.
2000-10-18 20:06:54 +00:00
9d3f5d7fbd
Adapt for new lun switch script.
...
Implement SCBUSACCEL ioctl.
Snapshot of work in progress on tagged queuing: we can send/receive
queue tag messages. Infrastructure to manage multiple commands per
devices not here yet.
2000-10-18 17:06:52 +00:00
9836ff3913
Looks like frame size isn't checked; just say we can do VLAN MTU.
...
Tested with a SMC9432TX.
2000-10-18 16:49:13 +00:00
f87b1573c3
Support ETHERCAP_VLAN_MTU by ignoring the EX_UPD_ERROR and EX_UPD_OVERSIZED
...
status bits. Tested with a 3c905-TX.
2000-10-17 16:16:52 +00:00
5cc13a273b
Support ETHERCAP_VLAN_MTU. It seems the chip doesn't check the frame size.
...
Tested with a NetVin 5000 and a WD8013EBT.
2000-10-17 16:14:42 +00:00
c64069308b
Make changes relevant to changes in WWN defaults.
...
Also fix egregious bug where we would never decrement
the islocked recursion counter. I guess this means
that we don't recurse on this platform! All of this should
go away when we have real lock primitives to use in drivers.
2000-10-16 05:18:15 +00:00
c7c2783178
Change some of the WWN macros- eliminate PORT_FROM_NODE_WWN and make
...
sure we have a DEFAULT_{PORT,NODE}WWN and ISP_{NODE,PORT}WWN macro
as a requirement for all platforms.
2000-10-16 05:16:56 +00:00
ffdbddbd79
Add in commented-out hiwater measurement.
...
Remove egregious older bug which had us refusing to log into
fabric devices unless they were NL ports. Whuff.
2000-10-16 05:15:55 +00:00
298ec0ecd9
Clarify/cleanup how node and port names are derived from nvram. Remove
...
clause 2 of licence. Remember to print initiator ID (LOGINFO level).
2000-10-16 05:15:05 +00:00
4318834442
Don't trim off the FCS, pass it up.
2000-10-15 19:56:31 +00:00
83666f01fa
Shuffle printfs around so they look right when we've got a drive attached.
2000-10-14 23:45:57 +00:00
b885772956
The input packet has the FCS attached to set M_HASFCS before passing up.
...
Revove eh = ... since it's no longer used.
2000-10-14 20:06:02 +00:00
2198741306
Use ether_ioctl().
2000-10-11 16:57:45 +00:00
fcde56c9ba
Add flags to indicate that tlp_init() should set some more BUSMODE bits.
...
TULIPF_BLE /* data is big endian */
TULIPF_DBO /* descriptor is big endian */
These setting is required for Big-endian bus front-end (such as APbus for
newsmips) to work with tulip. Also,
sc_maxburst
member is added to the tulip_softc to limit the maximum burst length.
This member defaults to zero which means no restriction for burst length.
2000-10-11 14:59:52 +00:00
b69ea2a63d
make it work right on non-32bit arch. from kjc@csl.sony.co.jp
2000-10-10 10:15:00 +00:00
db6fba6bdf
Move inclusion of rnd.h and sys/rnd.h from tulip.c to tulipvar.h.
2000-10-09 14:31:01 +00:00
ca88e2b6bd
Make tulip a random source.
2000-10-09 12:54:28 +00:00
34f3869cdc
Change int->bus_addr_t in com_kgdb_attach() prototype.
...
Compiles again with KGDB enabled.
2000-10-06 21:12:01 +00:00
f6bf6762ab
Ops, disable debugging messages.
2000-10-06 20:07:10 +00:00
171adcf634
Fix recurent typo: shed->sched
2000-10-06 16:39:04 +00:00
e353a6d9b2
Adapt for reselect handling from the script. While here, fix typo
...
(SIOP_SCXFER -> SIOP_SXFER).
2000-10-06 16:35:13 +00:00
2e6cb6a878
When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no
...
need to disable RWT and JAB.
2000-10-05 07:22:43 +00:00
d11ef545cd
Enable sanity checks in mk48txx_gettime().
...
(Many news68k have dead NVRAM.)
2000-10-04 17:00:45 +00:00
5fcde4924f
Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber
...
errors if VLANs are configured on the interface.
2000-10-03 23:35:55 +00:00
cbfe7605c9
Support ETHERCAP_VLAN_MTU by doing extra error checking upon packet
...
reception and saving other "bad frames" (i.e. ones that are larger
than the standard Ethernet frame length) if we have VLANs configured
on the interface.
2000-10-03 23:35:02 +00:00
5d4fa9b0ce
Revert rev 1.31 of bha.c (and associtated changes in the headers and
...
config glue files).
Fixes PR kern/9841. Tested by Tracy J. Di Marco White with a bt948
and 6 disks.
2000-10-03 14:07:36 +00:00
91959d389e
Typo in comment.
2000-10-03 13:54:02 +00:00
33e8ebeef3
1970 -> POSIX_BASE_YEAR
2000-10-03 13:52:39 +00:00
7edd5d54bc
Add support for the ADMtek AN983 and AN985.
2000-10-03 04:32:00 +00:00
1af3d80bce
fix compilation without INET.
2000-10-02 03:53:07 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
710c43c745
6 -> ETHER_ADDR_LEN
2000-09-28 10:56:57 +00:00
ab9b015dce
6 -> ETHER_ADDR_LEN
2000-09-28 10:10:14 +00:00
91178eae70
Add missing '&& defined(COM_MPLOCK)'
2000-09-26 14:12:42 +00:00
d52ba1b85f
Fix merge lossage in disabled code.
2000-09-25 01:07:25 +00:00
5eb24d5dd0
am7990[0]_intr(): only print the "entering with isr=XX" debug message
...
if compiled with LEDEBUG > 1
2000-09-24 18:37:22 +00:00
5fea96167f
use new generic bootverbose instead of local definition
2000-09-24 12:37:03 +00:00
6a71867356
Add `COM_MPLOCK' option to use a device-instance-specific spinlocks
...
when running at splserial(). This is a temporary measure (until
there's a MP-safe interrupt handling structure); until then, it should
be used when MULTIPROCESSOR and IPL_SERIAL > IPL_SCHED.
2000-09-23 17:17:11 +00:00
a48f581877
Substantial overhaul, factoring out of common code, removal of redundancy
...
and general cleanup. Still not a beautiful driver, but one I'd be willing to
introduce to my parents now.
2000-09-23 15:13:02 +00:00
65c1db338c
paddr_t -> bus_addr_t in prototypes too.
2000-09-23 12:08:16 +00:00
d651adf44a
paddr_t -> bus_addr_t.
2000-09-22 14:46:38 +00:00
cf3c3f9410
Rename to match Ben's naming scheme.
2000-09-22 05:48:50 +00:00
56cf963264
Support for SPARC machines with `su' devices.
2000-09-21 23:27:32 +00:00
bouyer