a24fb44ddf
Pull header files from `syssrc' since we use libsa/loadfile().
1999-11-29 14:49:12 +00:00
726970dc8c
add cnw* into pcmcia section.
1999-11-29 12:56:25 +00:00
42abf0bf78
regen.
1999-11-29 12:55:20 +00:00
1b6504a175
improve cnw driver, looking at bsdi/freebsd-pao cnw driver by wide+prb@bsdi.
...
- implement ioctls compatible with bsdi/freebsd-pao. stat type is
changed from u_int to u_quad_t to avoid overflows. now it is possible
to switch domain/encryption key from the userland, using cnwctl(8).
- implement multicast/promiscuous mode. tested with IPv6.
1999-11-29 12:53:59 +00:00
a075f72b0e
cnw driver ioctls, from FreeBSD/PAO2 repository
1999-11-29 12:40:59 +00:00
878e985d08
Some TX39 I/O region lies over 512MByte. KSEG2IOBUFSIZE reserves PTE to map there.
1999-11-29 11:14:49 +00:00
8b01b15437
TX3912/22 specific register defines.
1999-11-29 11:13:11 +00:00
347ea4cd91
TX3912/22 support. ENABLE_MIPS_TX3900 enables it.
1999-11-29 11:12:12 +00:00
558c978dea
Const poisoning.
1999-11-29 07:50:54 +00:00
9c0f37b416
regen.
1999-11-29 02:28:55 +00:00
dd7b5aed5b
Support for TDK LAC-CF010
...
by Ichiro Fukuhara (ichiro@ichiro.org ) on kern/8900
ichiro test TDK CF Card on Opensource matsuri,tokyo and send patch to us.
thanx.
1999-11-29 02:28:19 +00:00
ce5757bb6b
fix Fujitsu INTERTOP CX300 keymap.
1999-11-29 02:20:20 +00:00
82cd5e5ce2
add Fujitsu INTERTOP CX300.
1999-11-29 02:20:11 +00:00
18f862c072
More USB_DEBUG and DIAGNOSTIC output.
1999-11-28 22:49:53 +00:00
4905974fd1
Very initial support for booting PPC kernels on P5 boards.
1999-11-28 22:10:47 +00:00
14ed33e42e
Fix typo (&& -> &).
1999-11-28 20:30:57 +00:00
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
7bd006b847
Improve a few debug messages.
1999-11-28 20:04:22 +00:00
94552ad5d6
- Use alpha_atomic_{add,sub}_q() to update the pmap statistics. We now no
...
longer need to lock the kernel pmap in pmap_kenter_pa() and pmap_kremove().
- Since locking the kernel pmap in interrupt context is no longer required,
don't go to splimp() when locking the kernel pmap.
- Implement a new pmap_remove() function, not yet enabled by default. It
is structured like pmap_protect, and should be *much* faster. This was
actually written quite some time ago, but never committed because it
didn't work properly. Given the recent bugfix to pmap_protect(), "duh,
of course it didn't work properly before...". It seems to work fine now
(have done several builds and run the UVM regression tests using the new
code), but it is currently run-time optional so that some performance
measurements can be easily run against the old and new code.
1999-11-28 19:53:11 +00:00
1710fad449
Implement atomic addition and subtraction on quadwords.
1999-11-28 19:47:13 +00:00
9fcf201409
Make this compile again on sparc.
1999-11-28 18:06:46 +00:00
54f42f17fc
Don't bother spinning in the console 'putc' routine for the transmitter
...
to become idle; it actually doesn't matter as the chip takes care of
this for us. It would also spin endlessly in certain circumstances
during shutdown.
While I'm here, (finally) add code to allow sending BREAK characters.
1999-11-28 12:23:18 +00:00
f972baf686
Add definition for VR's special instructions.
1999-11-28 12:11:45 +00:00
3029c58799
Use a bitwise-and to test CC_IPURGE, not a logical-and. This could have led
...
to flushing the entire cache unnecessarily.
1999-11-28 11:10:47 +00:00
943c083676
PowerOff code. (not yet completely)
...
'halt -p' availavle.
not yet all power off...
cannot exit poweroff mode. (reset required..)
1999-11-28 10:59:05 +00:00
86a8f1d201
Sync cachectl1() implementation with other m68k ports.
1999-11-28 10:36:56 +00:00
99d3468790
Don't use the plural form of the word "target" if there is only one!
1999-11-28 10:10:51 +00:00
dc2663bf69
If there is only one ADB device, it will do us no good to avoid it
...
when guessing which device to poll next. Resolves PR 7407, but the
bug is a lot older than that.
1999-11-28 10:07:34 +00:00
465c7f924f
Don't use magic numbers! Use XINE_REG_IMSK and KMIN_REG_IMSK.
1999-11-28 08:29:00 +00:00
71cc75d706
Don't check for a write to write protected label if we are writing to
...
the raw partition.
1999-11-28 06:28:37 +00:00
fcab0ccebb
Tidy up the formatting of a comment.
1999-11-28 06:06:21 +00:00
d805fbc3b6
Check bounds against RAW_PART instead of partition 0.
1999-11-28 04:55:39 +00:00
62009df24f
Add new device vrdsu, with which we can hard reset the VR41xx CPU.
...
Why don't you try shutdown comand with option '-r ?
1999-11-28 04:29:37 +00:00
1fcc860815
Enable new pmax bootblocks.
1999-11-28 03:17:11 +00:00
bc7deba55e
Bump bootblock version number to 1.2.
1999-11-28 00:40:16 +00:00
70cbfb6fcd
Add CPPFLAGS and set LDSTATIC to -static.
1999-11-28 00:39:30 +00:00
52dcf041ef
Remove the ISP scsi driver. With the removal of the Qlogic microcode
...
it is no longer possible to setup these devices thus the driver will not
work.
1999-11-28 00:34:17 +00:00
50b389d4a6
Bootblock installer - based heavily on the alpha installboot but with
...
some significant differences:
* Because the pmax bootblocks don't have a fixed load address, we
need to keep the first stage blocks in /usr/mdec with some sort
of executable format that includes load and transfer address.
Since ELF is native, /usr/mdec/bootxx_* are in ELF format and
installboot (in loadbootstrap.c) needs knowledge of the ELF format.
* Support for installing the first stage at an arbitiary position.
-a adds the first stage to end of the "disk" (only on works on
regular files) and -i <block> puts the first stage at ISO
filesystem block number <block> for use in multi-arch boot
CDs (see installboot(8) for more details and an example).
* No checksum support. This should really be done in some sort of
MI way rather than duplicating code between ports' installboot.c
1999-11-28 00:32:29 +00:00
b96c403e14
New alpha-style first stage bootblock Makefiles.
1999-11-27 23:59:15 +00:00
b013ce2a48
Updated for new Makefile.booters and stand/ layout.
1999-11-27 23:57:42 +00:00
6fb34407ab
Update for new alpha-style bootblocks - a good deal of this is based on
...
the alpha stand/Makefile.bootprogs and stand/Makefile.bootxx.
1999-11-27 23:55:23 +00:00
c7f61c6f0e
Apparently sys/sysctl.h includes vm/vm_map.h which makes use of vaddr_t,
1999-11-27 20:05:45 +00:00
2a59794a70
Fix typo introduced in rev. 1.55.
...
It caused IP6 packets to be sent as AF_UNSPEC instead of AF_INET6.
1999-11-27 18:45:08 +00:00
bf013a4539
Remove ether+ driver. Requested by msaitoh.
1999-11-27 15:57:17 +00:00
2c11d38827
add some missing #ifdef SUN4M to the MP-handling code.
1999-11-27 14:54:53 +00:00
b006c3cae6
Fix frame buffer type for NEC MC-R520 and -R520A.
...
Add a menu item for IBM WorkPad z50.
1999-11-27 13:17:44 +00:00
9a6c8313f7
minor cosmetic merges; long way to go here.
1999-11-27 12:14:26 +00:00
264af07cff
merge sparc64 types.h; these files are now identical.
1999-11-27 11:33:39 +00:00
d7e14b468a
more sparc64 merging; these files are (basically) identical.
1999-11-27 11:20:41 +00:00
faa527dcc9
merge sparc64 limits.h; these files are now identical. this includes
...
a `fix' for when s?size_t was changed from int to long but the
definitions of S?SIZE_MAX were left as U?INT_MAX. these are now
U?LONG_MAX.
1999-11-27 11:14:40 +00:00
9d1afb7522
merge cosmetic differences from sparc port.
1999-11-27 11:06:36 +00:00
492e85822e
MNN has been standard for a Long Time.
1999-11-27 10:22:19 +00:00
aa206906a3
make this idempotent (from sparc/include/limits.h)
1999-11-27 10:13:15 +00:00
484cb25f55
s/long/int/ to make this identical the sparc64 version.
1999-11-27 10:10:02 +00:00
3c756ae10c
these files were removed years ago (exec.h was not even installed).
1999-11-27 10:04:30 +00:00
df56622ada
regen
1999-11-27 09:02:22 +00:00
3de779c46a
Add support for CS4235 codec as found on Intel KU440EX motherboard.
1999-11-27 09:02:13 +00:00
42b18ab82a
Clean up headers.
1999-11-27 07:07:04 +00:00
64b57a767e
Add prom_write() declaration.
1999-11-27 07:02:24 +00:00
77f2cc3a2f
Use alpha-style banner display and bootprog_* variables.
...
Look for default kernels in order of: netbsd.pmax netbsd netbsd.gz
netbsd.bak netbsd.old onetbsd gennetbsd.
1999-11-27 07:00:35 +00:00
4772d7bcd7
Check that a first-stage bootblock fits in a specified size - virtually
...
a copy of the alpha checksize.sh.
1999-11-27 06:55:04 +00:00
326cce3c7a
Add a PROM call stub for getchar.
1999-11-27 06:52:05 +00:00
92bd89485a
Remove code in sector 0 support - we don't need the space and it allows
...
for the coexistance for other port's bootblocks in sector 0.
1999-11-27 06:49:34 +00:00
1463e10159
Don't require a disklabel at the start of a disk - needed for
...
ISO 9660 f/s support.
1999-11-27 06:48:08 +00:00
31d531e54b
Header file include cleanup.
1999-11-27 06:47:24 +00:00
4001a35043
Small cleanup based on Alpha newvers.sh.
1999-11-27 06:46:56 +00:00
0246cad68c
GC register keyword.
...
Add LIBSA_SINGLE_DEVICE support.
1999-11-27 06:46:36 +00:00
8160906e08
Add lfs, cd9660, nfs and ustarfs filesystem support.
...
Remove callv variable declaration.
1999-11-27 06:45:52 +00:00
55ae392784
Add some PROM function prototypes
...
Add bootprog* variable declarations (ala alpha/stand/common.h).
1999-11-27 06:45:07 +00:00
4bb143c0ea
Move callv variable declaration here from conf.c.
1999-11-27 06:44:00 +00:00
c3c29ad5c5
Load second stage bootblocks from "boot.pmax", falling back to "boot"
...
for backwards compatibility and "boot.pma" after that for people who
make ISO filesystems with 8.3 format file names.
1999-11-27 06:34:06 +00:00
26b61c0dff
callvec.c has moved from stand/lib to stand/common.
...
XXX: The kernel proper shouldn't rely on files in stand! Will fix soon.
1999-11-27 05:35:00 +00:00
10c7b5ab91
Remove the remaining files in lib directory. The other files in
...
this directory were moved to ../common via a CVS repository copy.
1999-11-27 03:55:46 +00:00
40bbc6129e
Remove the remaining files in scsiboot directory. The other files in
...
this directory were moved to ../common via a CVS repository copy.
1999-11-27 03:54:43 +00:00
426c66b28c
Moved to common/callvec.c,v
1999-11-27 03:14:47 +00:00
42fdd5dfb7
Moved from lib/callvec.c,v
1999-11-27 03:14:46 +00:00
e2751ce295
Moved to common/printf.S,v
1999-11-27 03:12:24 +00:00
360739d57f
Moved from scsiboot/printf.S,v
1999-11-27 03:12:23 +00:00
88b44c10cb
Moved to common/clear_cache.S,v
1999-11-27 03:11:56 +00:00
ea515c3a7f
Moved from scsiboot/clear_cache.S,v
1999-11-27 03:11:55 +00:00
16ddb8bd85
Moved to common/bootxx.c,v
1999-11-27 03:11:41 +00:00
9bbac58265
Moved from scsiboot/bootxx.c,v
1999-11-27 03:11:40 +00:00
acefb84bcb
Moved to common/startprog.S,v
1999-11-27 03:10:17 +00:00
81ff761e62
Moved from lib/startprog.S,v
1999-11-27 03:10:16 +00:00
a61aff17a2
Moved to common/start.S,v
1999-11-27 03:10:07 +00:00
ffab24d77d
Moved from lib/start.S,v
1999-11-27 03:10:06 +00:00
d4e109f26d
Moved to common/rz.h,v
1999-11-27 03:09:52 +00:00
2dcb3cc6f2
Moved from lib/rz.h,v
1999-11-27 03:09:51 +00:00
de5d47be57
Moved to common/rz.c,v
1999-11-27 03:09:42 +00:00
dd6570cdf6
Moved from lib/rz.c,v
1999-11-27 03:09:41 +00:00
875e06c29a
Moved to common/putchar.c,v
1999-11-27 03:09:27 +00:00
59e9772e78
Moved from lib/putchar.c,v
1999-11-27 03:09:26 +00:00
7915729248
Moved to common/newvers.sh,v
1999-11-27 03:09:06 +00:00
cf4333e101
Moved from lib/newvers.sh,v
1999-11-27 03:09:05 +00:00
b24ec11fca
Moved to common/devopen.c,v
1999-11-27 03:08:47 +00:00
16c74987cc
Moved from lib/devopen.c,v
1999-11-27 03:08:46 +00:00
1a4a126f90
Moved to common/conf.c,v
1999-11-27 03:08:31 +00:00
b02cf094dc
Moved from lib/conf.c,v
1999-11-27 03:08:30 +00:00
8ac75f530b
Moved to common/common.h,v
1999-11-27 03:08:02 +00:00
034554d0a8
Moved from lib/common.h,v
1999-11-27 03:08:01 +00:00
41f1bf53e1
Moved to common/bootread.S,v
1999-11-27 03:07:40 +00:00
4a75552397
Moved from lib/bootread.S,v
1999-11-27 03:07:39 +00:00
d5c8b5ad99
Moved to common/bootinit.S,v
1999-11-27 03:07:22 +00:00
1f59f63d6d
Moved from lib/bootinit.S,v
1999-11-27 03:07:21 +00:00
4d2b51c4be
Moved to common/bootinfo.h,v
1999-11-27 03:06:56 +00:00
3f99fedebd
Moved from lib/bootinfo.h,v
1999-11-27 03:06:55 +00:00
4a53cd4daa
Moved to common/bootinfo.c,v
1999-11-27 03:06:31 +00:00
1e9b1f56a7
Moved from lib/bootinfo.c,v
1999-11-27 03:06:30 +00:00
089a87b280
Moved from boot/boot.c,v
1999-11-27 02:52:07 +00:00
9f8721cd67
Moved to common/boot.c,v
1999-11-27 02:52:06 +00:00
fbbde1126e
Remove NUMBOOT define - disklabel doesn't install bootblocks anymore.
1999-11-27 01:58:37 +00:00
db783e76e8
Use explicitly sized types for entities that exist on disk.
...
Use alpha-like defines for boot block offset on disk and boot block size.
1999-11-27 01:51:20 +00:00
b83882f7c7
Use new pmax stand structure for multi-filesystem bootblocks. All
...
entries are commented out for now until everything else is updated.
1999-11-27 01:45:46 +00:00
69e1252d6a
Oops, px* won't work right now - go back to px0.
1999-11-27 01:31:47 +00:00
0b1eae6c7a
* all device attachments, after discussion with Jason Thorpe and Toru
...
Nishimura.
1999-11-27 01:19:31 +00:00
6f6045c97d
Regen.
1999-11-27 01:03:33 +00:00
8c5ab0744f
IBM cards update.
1999-11-27 01:03:18 +00:00
1d9d2c47c5
In pmap_emulate_reference(), always or in the bits. I know the code is trying
...
to be clever, but...
Also, a slight optimization for the write case.
1999-11-27 00:25:15 +00:00
f26df92bed
Fix bugs in pmap_protect() that were responsible for the `ld.elf_so lossage'.
...
* We could overrun the eva by as much as L1SEG_SIZE-PAGE_SIZE.
* sva was advanced *twice* for each valid l3 or l2 page, causing it to get out
of sync with the PTE pointers.
1999-11-26 23:04:33 +00:00
2aea14c604
Clear B_AGE in bdirty(), this buffer must go through the LRU again
...
to be back on the AGE queue. Otherwise we risk recycling a set
of buffers with (soft) dependencies on the AGE list, which may
last forever if the vnode they belong to is locked (i.e. the syncer
won't get to the buffers they depend on, so their dependencies
are never flushed).
1999-11-26 17:18:15 +00:00
506836faa1
Regen.
1999-11-26 17:17:21 +00:00
71f7530292
Add two 3Com modems.
1999-11-26 17:16:53 +00:00
8f56b89950
More WDCDEBUG_PRINT.
1999-11-26 12:39:43 +00:00
97fc004770
Don't complain when umodemstartread() returns USBD_IN_PROGRESS. It's normal.
1999-11-26 09:12:50 +00:00
d94a5b55fb
Make timeout device exploration optional in debug mode.
1999-11-26 01:41:03 +00:00
77bb4d8ce2
Cosmetic change.
1999-11-26 01:40:01 +00:00
aa32088c20
Cosmetic changes.
1999-11-26 01:39:27 +00:00
240991073c
Generate an error message when attachment fails.
1999-11-26 01:38:40 +00:00
14d940c179
Jens, not Joerg
1999-11-25 22:11:03 +00:00
5a05d40012
Address range scaling is hidden by the bus_space functions. Correct the
...
definitions in case we ever do bus_space accounting on Amiga.
1999-11-25 21:58:57 +00:00
366a09427a
Add a few boards we know about.
...
This should really be table-driven and optional.
1999-11-25 21:57:45 +00:00
57ac5a3ea7
Another RTL8019 board: X-serve by Individual Computers Jens Schoenfeld.
1999-11-25 21:53:01 +00:00
df61f0409e
From the 68040 User Manual, page 4-10:
...
"To fully support self-modifying code in any situation, it is imperative that
a CPUSHA intrcution is executed before the execution of the first self-modified
instruction. The CPUSHA instruction has the effect of ensuring that there is
no stale data iin memory, the pipeline is flushed, and instruction prefetches
are repeated and taken from external memory."
I verified that this is the only way (I can think of) to make the sigtramp
regression test work on 68040. doing cpushl dc; cinvl ic; over the affected
address range, then nop (to synchronize the pipeline) is not enough; apparently
the nop does not FLUSH the pipeline and prefetch...
Note that the 68060 UM has copied the above cited passage, but in fact this is
not true. This might be connected to the fact that the 68060 does ensure
memory access order under most conditions.
1999-11-25 20:30:38 +00:00
6783a346b9
Fix date in copyright string.
1999-11-25 16:40:19 +00:00
249aa2e089
Target `machine' symlink explicitly at the sparc64 headers.
1999-11-25 14:46:08 +00:00
e0118ca933
Suppress the `machine' symlink when making target `obj'.
...
Also add it to the clean target list.
1999-11-25 13:27:30 +00:00
b797a06151
Make symlink to appropriate header directory and have cpp use it.
1999-11-25 13:25:09 +00:00
dcba4f5e10
use a portable invocation for cc -E
1999-11-25 06:06:03 +00:00
ca66e6b619
- pass slot number to sbus_get_intr() as a new argument.
...
- in sbus_get_intr(), if we are not an onboard device (ie, sbus card),
encode the slot number into the sbi_pri so that we can later extract
it and use it to find the interrupt map & clear registers for this
device.
- remove "intr" support as it is really pre-sun4u only.
- don't "pause" for so long in sbus interrupt debug messages..
with the slot number being passed back from sbus_get_intr(), the FS/BE
card in an ultra2 now appears to get interrupts and gets beyond
waiting for the scsibus probe!
1999-11-25 05:03:53 +00:00
36e75e7449
Some fix on comment descriptions.
1999-11-25 02:53:46 +00:00
94b897d4bf
Reorder device descriptions to reflect what kernel shows on screen,
...
mostly in address ascending order.
1999-11-25 02:48:12 +00:00
353ca54019
Move memory sizing to a new function memsize_scan(), and add an empty
...
stub for memsize_bitmap() to use the PROM bitmap for memory information.
Add a memsize function pointer to the platform structure, and make all
existing DECstation models use memsize_scan() for now.
Interestingly, from the Ultrix cpuconf.{c,h} only the 3100 and 5400 use
a memory scan to determine available memory - all other models use the
PROM bitmap...
1999-11-25 01:40:22 +00:00
961d4d6ad2
Change CS4297 id entry.
1999-11-24 23:21:01 +00:00
df60fd6eac
Regen.
1999-11-24 23:18:07 +00:00
ae1dcc2dc0
Comment out some entries for Entrega serial adapters. These entries
...
are only relevant before firmware download.
1999-11-24 23:17:27 +00:00
c156651eb9
Avoid the special when disconnecting devices with no config descriptor.
...
It was wrong.
1999-11-24 23:14:39 +00:00
bb2a9b3008
Add some more debug printing.
1999-11-24 23:13:19 +00:00
2454426afe
Take a cue from the i386 port: Enable DHCP by default, rather than
...
BOOTP.
1999-11-24 22:01:19 +00:00
cfabac64f5
fix vm_page initialization for the case where kernel+symbols+tables
...
exceed 16M
1999-11-24 18:32:50 +00:00
b1f2453dee
add a diagnostic panic to catch illegal memory ranges passed to
...
uvm_page_physload()
1999-11-24 18:28:49 +00:00
93d33f5806
Wildcard 3max {asc,le}0 at tc attachment.
1999-11-24 02:25:37 +00:00
635d546dd9
Specify the locators for everything.
1999-11-24 02:10:47 +00:00
4d7bdecfce
My 3MAX's config file.
1999-11-24 02:05:40 +00:00
7fa174a09e
Specify all the locators for the various devices.
1999-11-24 02:05:12 +00:00
d4cf67e2d2
s/CEXTRAFLAG/CEXTRAFLAGS/ so it works.
1999-11-24 01:54:34 +00:00
abc579187f
prefix a variable with "pci_"
1999-11-24 01:53:38 +00:00
05715b1dbd
Attach asc0 and le0 at tc 5 and 6 respectively - 5000/200 now works again.
...
XXX: Should the turbochannel slot numbers be wildcarded or hardcoded?
It's not as if they can appear anywhere else...
1999-11-24 01:52:06 +00:00
6a03465ac4
Don't check for additional dc instances yet.
1999-11-24 01:43:38 +00:00
11ea81b1c2
Delete now-unreferenced files.
1999-11-24 01:18:13 +00:00
d6a69159ca
Fix tyop in comment.
1999-11-24 00:18:37 +00:00
298f4b27f4
Make separate device lists for the 3100 and 5100, and add a way to probe
...
for optional `dc' devices on the 5100.
1999-11-24 00:04:06 +00:00
d901f6eae0
Be more careful to block bio interrupts for some data structures. There
...
were at least a few missed cases where vp->v_{clean,dirty}blkhd were
unprotected since the softdep/trickle sync merge.
1999-11-23 23:52:40 +00:00
881d3f4735
A little cosmetic.
1999-11-23 20:36:10 +00:00
98e19f8e0e
Add an `addr' locator to the `ibus' bus. This allows you to wire down
...
unti numbers on systems which have e.g. multiple `dc' devices on the
internal bus (like the 5100).
1999-11-23 20:07:34 +00:00
761038f279
Correct the test for a free-slot for isa_intr_alloc(). Also issue a warning
...
that should make it clear in which slot the card is expected to be in.
Isapnp is not what it seems to be on the atari (where interrupts are
hardwired to slot numbers).
1999-11-23 14:48:58 +00:00
c48182e1ae
Add missing `major' entries: md and fd.
1999-11-23 14:17:09 +00:00
a09d3191a0
Remove leading '/' from pathnames, using same logic as ufs.c. Allows new
...
style (but not yet committed) pmax bootblocks to open "/boot.pmax" on an
ISO image. Same problem reported for NFS by Jason Thorpe.
1999-11-23 12:20:53 +00:00
2e175b3f88
Avoid 0 blocksize.
1999-11-23 08:38:30 +00:00
6378e492c1
RAMDISK = GENERIC + md
1999-11-23 05:08:25 +00:00
d617933e27
Round out our options with 4bpp framebuffer support, conditional
...
on RCONS_4BPP.
1999-11-23 01:52:52 +00:00
e9c570ec77
Now make an ofwboot.xcf, and XCOFF version of ofwboot. Uses the new
...
fix-coff program.
1999-11-23 01:35:37 +00:00
cd6e26a395
Add fixcoff, a program to be used during a build to help make xcoff'
...
binaries from elf ones.
1999-11-23 01:32:37 +00:00
17971be39a
Don't used extern on uhcidebug and ohidebug variables.
1999-11-22 21:57:09 +00:00
e55cd100f8
minor stylistic change
1999-11-22 19:15:12 +00:00
5d1658a740
don't prototype Debugger() here, including <sys/sytm.h> is enough
1999-11-22 19:05:32 +00:00
5b50e62cbb
don't prototype Debugger() here, i't done in <sys/systm.h>
1999-11-22 19:01:50 +00:00
b9d5c93b1c
Debugger() --> cpu_Debugger(), include <sys/sytm.h> for it's prototype
...
remove obsolete comment
1999-11-22 19:00:57 +00:00
9986dd3f7d
Debugger()/cpu_Debugger() is always available and always defined/prototyped
...
in <sys/systm.h> for sun3/sun3x, even in non-DDB case
1999-11-22 18:34:00 +00:00
aca868ca69
previous is true even for sun3x
1999-11-22 18:05:41 +00:00
a0d86c452f
sun3 has cpu_Debugger() and hence Debugger() available even in non-DDB case
1999-11-22 16:53:59 +00:00
1acee6a50f
Remove D-I cache synchronization code in setregs(). MI part has it now.
1999-11-22 13:31:44 +00:00
668b553d53
Need opt_compat_netbsd.h.
1999-11-22 13:26:59 +00:00
82d9324e38
Remove duplicate IPv6 options.
1999-11-22 08:14:05 +00:00
0cea637239
merge SHARK.v6 into SHARK.
1999-11-22 05:17:33 +00:00
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
1cf30597ea
forgot to change 'VRKIU_LAYOUT' to 'PCKBD_LAYOUT'.
1999-11-22 02:14:30 +00:00
49ead2a4a7
add RCS Id.
...
add copyright & license notice.
1999-11-22 02:11:09 +00:00
3e16beaf22
Add a bunch of "__attribute__((__packed__))"s
...
to get along with the ELF compiler.
1999-11-22 01:14:55 +00:00
bb2093f24a
Initialize i_ffs_effnlink, so every file doesn't look like it's already been
...
deleted for the purpose of dirops (particularly create and mkdir). Addresses
PR#8815.
1999-11-21 19:25:31 +00:00
58f7417063
Call the machine dependent code to do d-cache/i-cache synchronization, for
...
architectures that need it. Without this, at least on Motorola 68040 and 68060
machines, the sigtramp regression test fails.
1999-11-21 17:04:05 +00:00
633fd1e1cc
Check presence of Sbus interrupt properties before using them.
1999-11-21 15:23:01 +00:00
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
312ac4e1e1
add scan code mapping for
...
IBM WorkPad z50
NEC MobilePro 770, 800
Sharp Tripad PV6000 / Vadem Clio
NEC MC-CS series
Fujitsu Intertop CX300
change keyboard layout according to model(default).
add options PCKBD_LAYOUT to override default.
1999-11-21 12:53:57 +00:00
a16b5d0ff6
Regen.
1999-11-21 12:49:07 +00:00
26fe8d79e2
regen.
1999-11-21 12:48:44 +00:00
85bb334fd0
add IBM WorkPad z50
1999-11-21 12:48:25 +00:00
69af3df31f
add MCCS comctrl (GPIO 14)
...
add IBM WorkPad z50
1999-11-21 12:47:33 +00:00
40fbdc840c
add wscons to compile
1999-11-21 12:46:51 +00:00
d92a868bcf
Avoid unused symbol warnings when not using DDB.
1999-11-21 11:47:51 +00:00
pk