registers after switching to a VESA linear framebuffer mode is not
guaranteed to work. This should fix the majority of the problems people
have been experiencing with vesafb.
XXX: Still doesn't fix the assertion in wscons with options DIAGNOSTIC.
so invalidate the WEP key registers to force us to write the keys
back to the hardware.
Revamp key handling: use the hardware WEP engine for 40-bit and
104-bit keys, only; use software WEP for all other key lengths.
Set the hardware key length to the length of the default Tx key,
or if there is no default Tx key, use the length of the longest
WEP key.
set the mgt frame tx timer before dispatching the frame to the
driver; this closes a race where a response could be processed
before the timer was started and cause a RUN->SCAN state change
when operating in station mode
number source on a huge set of machines. Also, now that amdpm has
support for the SMBus controller, add (commented-out, since we don't
always know what address the sensors are at) iic at amdpm and adt7463c
at iic, which is the configuration used on the Tyan S2881 and S2882-D
server boards. This should work in either 64-bit or 32-bit mode; it's
been tested in 64-bit mode. Addresses PR kern/32463 submitted by
Anil Gopinath.
and ADT 7463c thermal and voltage monitor found on the Tyan S2881 and S2882-D
(and probably other boards as well). We do not currently support any kind
of detection of the i2c address of the thermal monitor; it appears to be
at 0x2D on the S2881 and 0x2E on the S2882-D (kernel config examples
forthcoming).
From PR kern/32463 submitted by Anil Gopinath, anil_public@yahoo.com.
The rest of the gnu/dist/diffutils tree remains at version 2.8.1.
Fixes PR 23162 from George Michaelson (etcupdate/sdiff report
error on applying merge edits)
Approved by wiz, christos
as we enter the IEEE80211_S_AUTH and IEEE80211_S_ASSOC states, so
that we don't send 802.11 Authentication and Association frames
with BSSID=00:00:00:00:00:00.
of calling rt_ifmsg directly. This allows other parts of the kernel
to change the behaviour depending on the link state and is a
prerequirement for CARP.
Hide mii_phy_statusmsg, mii_phy_update should be used instead.
Don't send routing messages for baudrate changes, if_baudrate is
currently not exported via this interface.
OK tls@
* Expand the "-s" flag to -s {srcdir|tgzfile|tempdir}.
* Deprecate the "-b" flag. It is replaced by "-s tempdir".
* Change "-s srcdir" to refer to the top of the source tree (e.g.
/usr/src) instead of the etc subdirectory.
In etcupdate's interactive phase, enhance the "s" command to be able
to invoke alternative diff commands.
Also some style changes.
Approved by christos
jmcneill