5e43ad3add
Add 1.4.1 and 1.6.2.
2003-10-19 08:58:52 +00:00
ec09eb497f
New sentence, new line.
2003-10-19 08:54:20 +00:00
8034863446
Add RCS Id.
2003-10-19 08:54:13 +00:00
d77ec799a5
Support Darwin static binaries (I should say: support the only Darwin
...
static binary: otool). Dynamic binaires have a pointer to the Mach-O
header on the top of the stack, static binaries don't have this, and
having it produced a crash.
One bugfix: the EXEC_MACHO code assumes that entry = NULL means that
the entry point has not been found in the load commands seen so far.
Therefore we need to initialized entry to NULL if we want a static binary
to discover it. (dynamic binaries were forced to iscover it because when
the intepreter load command is found, entry is updated whatever its
value was before).
One hack: Both COMPAT_MACH and COMPAT_DARWIN are willing to run Mach-O
binaries. COMPAT_MACH fails for dynamic binaries because it cannot find
the interpreter in /emul/mach. For static binaires, it will accept them
(and for Darwin static binaries, this will cause a failure). Until we
rite a test for matchinf Darwin static binaries, just swap the order of
COMPAT_MACH and COMPAT_DARWIN in the exec switch so that COMPAT_DARWIN
is tried first (this will have the advantage of speeding up program
startup). EXECSW_PRIO_{FIRST_LAST} does not seem to work...
2003-10-19 07:52:22 +00:00
175f717bf5
Be more careful about validating the user-specified geometry, otherwise
...
it's too easy to specify a geometry which will cause a divide by zero
elsewhere in the disklabel code.
2003-10-19 07:41:19 +00:00
87b62b5af0
KNF:
...
- ansify
- no breaks after returns
- statics where needed
- no exit after errx
2003-10-19 07:34:38 +00:00
52215a07e7
add rl_catch_signals
2003-10-19 06:28:35 +00:00
e08f429064
Add definitions for NetBSD versions:
...
1.4.1 1.4.2 1.5.1 1.5.2 1.5.3 1.6.1 1.6.2 2.0
2003-10-19 06:20:20 +00:00
8233be784c
support MAKEVERBOSE
2003-10-19 06:12:07 +00:00
a414e34de5
support MAKEVERBOSE and use ${HOST_SH}
2003-10-19 06:11:38 +00:00
b606e4ebf0
support MAKEVERBOSE
2003-10-19 06:10:41 +00:00
6672bff7fc
rework how cfparse.y is generated
2003-10-19 06:09:17 +00:00
eae82b3d06
#define _PATH_BIN_RCMD in common_source/pathnames.h rather than using
...
wacky Makefile rules to compile rcmd.c
2003-10-19 05:51:44 +00:00
8545f3b03c
Switch back to using YHEADER instead of custom yacc rules.
...
We use build.sh to support hosting on older NetBSD releases...
2003-10-19 05:30:30 +00:00
d931e2e741
support MAKEVERBOSE
2003-10-19 05:24:53 +00:00
4afe0be65c
support MAKEVERBOSE for .txi.info .texi.info .texinfo.info
2003-10-19 04:54:53 +00:00
ddff99b7f4
rework to use the newer _MKMSGCREATE (et al) macros
2003-10-19 04:45:01 +00:00
c545cc169d
support MAKEVERBOSE
2003-10-19 04:30:30 +00:00
a694177df5
support MAKEVERBOSE and use ${HOST_SH}
2003-10-19 04:25:00 +00:00
87755a0463
support MAKEVERBOSE and use ${HOST_SH}
2003-10-19 04:05:01 +00:00
bef75a2e23
add _MKMSGINSTALL.m
2003-10-19 03:53:33 +00:00
daa035e3e8
Teach build.sh about the ibmnws port.
2003-10-19 03:37:36 +00:00
a9baced49d
NWDO for ibmnws.
2003-10-19 03:37:16 +00:00
14573b928a
Add ibmnws specific files. (XXX someone should checkout MAKEDEV and make
...
it complies with how MAKEDEV is done now).
2003-10-19 03:36:45 +00:00
10c0014b94
Add host tool version of ncdcs
2003-10-19 03:35:30 +00:00
8d6789fc05
Add ncdcs utility (for ibmnws port). Calculates and writes the NCD checksum
...
used in kernel files. Only built for ibmnws port.
2003-10-19 03:34:59 +00:00
3dc55c1216
Add IBM Network Station 1000 port. From John Gordon and updated by me.
2003-10-19 03:33:49 +00:00
3642aa4ccc
Add PCN_NO_PROM flag. (read the macaddr from the chip assuming the "BIOS"
...
has properly written it). From John Gordon.
2003-10-19 03:32:25 +00:00
d2142fb492
fix _MKSHECHO for MAKEVERBOSE=1
2003-10-19 03:21:18 +00:00
ba34947f80
Add powerpc-specific isa and isadma machdep code. (Merge common code from
...
prep and sandpoint and ...)
2003-10-19 03:19:32 +00:00
4ccb31e74a
Provide _MKMSG{BUILD,CREATE,COMPILE,FORMAT,INSTALL,LINK,LEX,YACC} to display
...
${_MKMSG} " ... {$.TARGET}" and use appropriately.
Provide _MKMSGLINK.m to provide "link" message by itself (without ${.TARGET})
Replace _MKSHCMD with _MKSHECHO
2003-10-19 03:00:55 +00:00
0ceff4469c
Mention j6x0tp(4).
2003-10-19 02:41:01 +00:00
437e63c180
__KERNEL_RCSID.
2003-10-19 02:22:56 +00:00
738a5e234e
Config glue for j6x0tp(4).
2003-10-19 02:21:40 +00:00
e4bd58b011
Driver for Jornada 680 touch screen.
2003-10-19 02:20:25 +00:00
e14dfde075
Add rules for .s .s.o .S .S.o to support per-source COPTS,CPUFLAGS,CPPFLAGS
...
and MAKEVERBOSE
2003-10-19 02:11:29 +00:00
1e840c4d40
Ensure that $TERM is set in the real environment before calling el_init(3)
...
when executing "set -o (emacs|vi)". Fixes [bin/23175] from me.
2003-10-19 01:55:05 +00:00
bbbbcbe44f
Fix typos in comments. From Jared Yanovich via jmc@openbsd.
2003-10-19 01:52:45 +00:00
9833c17169
Remove some unreachable code with the comment "To shut up compiler"
...
that neither gcc 2.95.3 or 3.3.1 complains about if that bit of code
is missing...
2003-10-19 01:49:03 +00:00
59fb31d7cc
Remove unreachable break after return and goto statements.
2003-10-19 01:44:48 +00:00
2af5f10bcc
Bump date for previous.
2003-10-19 01:26:11 +00:00
8564ba3934
support MAKEVERBOSE and use ${HOST_SH}
2003-10-19 01:23:27 +00:00
6cf0d872cd
support MAKEVERBOSE
2003-10-19 01:19:10 +00:00
2b8c8463a6
Support MAKEVERBOSE. (Some host tools still generate verbose runtime messages)
2003-10-19 01:01:44 +00:00
a9d371700c
improve MAKEVERBOSE message for HOST_LINKed tools
2003-10-19 00:43:02 +00:00
29e7d09b65
Support MAKEVERBOSE (XXX: mksyntax is noisy when MAKEVERBOSE=0).
...
Use DPSRCS appropriately.
2003-10-19 00:35:26 +00:00
046b9ab451
support MAKEVERBOSE
2003-10-19 00:14:16 +00:00
6e782349a3
change allocation policy in el_push to allocate the string itself.
...
fix issues with strdup.
2003-10-18 23:48:42 +00:00
e1c37edb37
Skip build of {postfix,sendmail} if MK{POSTFIX,SENDMAIL} == no, respectively.
...
(XXX NO_SENDMAIL= must eventually).
2003-10-18 23:46:26 +00:00
29f0f3babf
Change the location of BSD disklabel not to overlap with LIF header.
...
LABELSECTOR: 0 -> 1
LABELOFFSET: 64 -> 0
per discussion on NetBSD mailing lists: port-hp700 and tech-kern.
2003-10-18 23:45:30 +00:00
wiz