a8a1317719
latform description for DESKTECH Tyne and rPC44.
...
not tested.
2001-06-13 15:27:17 +00:00
b7f2c5a631
common chipset description for NEC PCI generation platforms
2001-06-13 15:23:22 +00:00
221f729935
common chipset description for NEC EISA generation platforms
2001-06-13 15:22:49 +00:00
272b3c0d0d
common chipset description for NEC EISA and PCI generation platforms
2001-06-13 15:21:52 +00:00
3e5520d4d1
common description for platforms which have Jazz and EISA
...
but doesn't have PCI, like magnum based platforms and
NEC EISA generation platforms
2001-06-13 15:21:00 +00:00
4f9452f773
common chipset description for magnum based platforms like
...
Microsoft-Jazz and PICA-61
2001-06-13 15:19:28 +00:00
eab4fd5e7a
rename statically allocated software context which is needed for
...
console initialization, from "struct necpb_config necpb_configuration;"
to "struct necpb_context necpb_main_context".
to resolve naming conflicts with "struct XXX_config *XXX_conf;"
which describes platform-dependent configuration variants.
2001-06-13 15:18:28 +00:00
1aa149136b
rename statically allocated software context which is needed for
...
console initialization, from "struct necpb_config necpb_configuration;"
to "struct necpb_context necpb_main_context".
to resolve naming conflicts with "struct XXX_config *XXX_conf;"
which describes platform-dependent configuration variants.
2001-06-13 15:18:27 +00:00
56197e330a
make vga frontend does same thing with pccons frontend
2001-06-13 15:12:28 +00:00
d54e67b2d3
add copyright notice
2001-06-13 15:12:02 +00:00
5738ad78e7
remove "cputype", introduce "struct jazzio_config *jazzio_conf;" to
...
describe platform-dependent variants. clean up jazz i/o interreupt
handling had device configuration information.
2001-06-13 15:11:38 +00:00
131e5819c3
remove "cputype", introduce "struct asc_config *asc_conf;"
...
to describe platform-dependent variants.
2001-06-13 15:10:35 +00:00
ceabf3273a
remove "cputype", introduce "struct btl_config *btl_conf;"
...
to describe platform-dependent variants.
2001-06-13 15:09:32 +00:00
bc0d30a90c
introduce "struct platform", and remove "cputype" variable.
...
this change also includes a patch to obtain secondary cache size
from ARC firmware by Bob Meader, which was posted on port-arc on 18 Aug 2000.
this should make NEC Express RISCserver work.
this change obtains ID of display controller from ARC firmware, too.
2001-06-13 15:08:05 +00:00
b7abba7794
split pccons driver into "pccons" and "opms",
...
also split into bus-dependent frontend and bus-independent backend.
2001-06-13 15:05:43 +00:00
226c44ecbc
use MI i8253reg.h instead of home grown one
2001-06-13 15:03:53 +00:00
ba6a3c6db5
split ISA bridge code into bus dependent frontends to remove "cputype"
...
variable.
2001-06-13 15:03:24 +00:00
c6eacfae15
split clock_mc.c into interval timer driver (timer) and
...
real time clock driver (mcclock)
2001-06-13 15:02:12 +00:00
c7b603e55d
split clock.c into interval timer part ("timer" for cpu_initclock) and
...
real time clock part ("todclock" for inittodr, resettodr)
2001-06-13 15:00:26 +00:00
33669543d9
remove algor related codes, because there is independent (and working!)
...
algor port now.
2001-06-13 14:58:38 +00:00
7a314c516c
enable device_register(9) on arc port to parse boot device name
...
passed by ARC firmware correctly.
2001-06-13 14:36:33 +00:00
68306a9bf0
Implement a db_trap_callback which turns off the watchdog on entry to DDB
...
and turns it back on on exit. Hook the callback in early in the boot, so
it's there as soon as DDB is available.
2001-06-13 12:34:24 +00:00
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
4553af4ee5
Add minimal support for vr4122/vrc4173 pci.
2001-06-13 07:32:47 +00:00
6b358ba879
remove interlan np100 entry as the referenced files don't exist
2001-06-13 06:43:08 +00:00
3df61fa9d9
Generic softintr for hpcmips.
2001-06-13 06:03:10 +00:00
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00
7e59a1be7a
No longer need MIPS3_5200 here.
2001-06-12 22:32:50 +00:00
02293e0ea7
Be prepared to get OpenFirmware client entry in either %o3 (PROM way)
...
or %o0 (our boot code passes romp in %o0 even for OF machines).
Discussed with pk.
2001-06-12 21:01:26 +00:00
ca5de264b4
Change the structure of a bus_space_handle_t in a desperate bid to avoid using
...
function pointers. It now contains two base addresses, one for 8-bit
transfers and one for 16-bit transfers. This should make it possible for me
to handle the Castle EtherSCSI card, which uses and address line to select
transfer width to the i82595.
2001-06-12 20:16:22 +00:00
2b283d77df
For arm ports where machine != arm??, descend into the cats,dnard,netwinder
...
directories and install their include files too.
2001-06-12 18:16:31 +00:00
6506d53f68
Nuke include files which are just <arm/foo.h>. Adjust Makefile accordingly.
2001-06-12 18:03:55 +00:00
d4dcda551f
Revert back to arm32 (for now).
2001-06-12 18:02:20 +00:00
12635e46a1
The machine is cats, the machine_arch is arm (not arm32).
2001-06-12 17:38:41 +00:00
0aff179f16
Eliminate all files that are just #include <arm.foo.h>. Update Makefile
...
to refer to cats, not netwinder.
2001-06-12 17:37:35 +00:00
f1d3ac74a5
Change comment.
2001-06-12 17:36:55 +00:00
66c1ffd9be
Remove cpu_dumpconf(); it's in powerpc_machdep.
2001-06-12 17:23:13 +00:00
713feac239
Include powerpc/mpc6xx/{bat.h,pte.h} if PPC_MPC6XX is defined.
2001-06-12 17:20:50 +00:00
bee211fc53
Move "file .../bus_dma.c" line to MD place.
...
Add options PPC_MPC6XX on missed ports.
XXX I think PPC_OEA is better name.
2001-06-12 17:13:34 +00:00
fa3621e3be
Move netwinder_machdep.c to files.netwinder. Eliminate opt_netwinder.h and
...
use #ifdef netwinder insead. XXX ebsa285_machdep.c should move to the cats
directory and files.cats
2001-06-12 17:10:25 +00:00
f8ce82f817
Another steps for ELF.
...
- register prefix
- machine/asm.h
- deprecated -T option for ld(1)
2001-06-12 16:57:27 +00:00
cbad4436c2
One more.
2001-06-12 16:32:00 +00:00
51a013241c
Make this compile w/o akbd or ukbd.
2001-06-12 16:29:07 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
3bd0afbc54
Make tracing of stack by frame argument work.
2001-06-12 13:22:06 +00:00
5335780e31
Support to get into DDB from hardclock interrupts by putting a value in
...
the RPB wait field.
2001-06-12 13:20:29 +00:00
8f96f4b21c
Fix problem where console interrupts never got enabled after RB_ASKNAME.
2001-06-12 13:18:38 +00:00
55e73f8bc1
I was too careless. Do not throw away the prepared string. :p
2001-06-12 11:29:31 +00:00
8f68bebb7e
Detect 4000/VLC correctly + make halt/reboot work.
...
From Michael L. Hitch (mhitch@montana.edu ).
2001-06-12 11:24:50 +00:00
5d6ce3b75c
Make this compile again.
2001-06-12 10:30:04 +00:00
b1b468a365
Remove unneeded whitespace.
2001-06-12 10:03:04 +00:00
be97fea093
Remove Makefile.cats. We now use the arch/arm/conf/Makefile.arm.
2001-06-12 08:33:48 +00:00
eb541612a0
Add cats specific makefile for tags and includes.
2001-06-12 08:32:46 +00:00
f90999bd42
Cats doesn't need io.h any more as it has it's own conf.c files.
2001-06-12 08:31:53 +00:00
a7b8789da8
Add cats specific autoconf and conf.c. Also add defopt NETWINDER to files.cats, this is so a few things that include opt_netwinder compile.
2001-06-12 08:30:47 +00:00
8c53bc98ee
comment out MEMORY_DISK_HOOKS, currently cats can only use an in-kernel memory disk.
2001-06-12 08:27:08 +00:00
0bdd2faeed
Get the opcode mask right for almost all the Op_OE opcodes (only two were
...
correct).
2001-06-12 05:31:44 +00:00
ba52d7a5d0
Always indirect through the "locoresw" to get the cache ops, since
...
there are just far too many combinations to handle with magic
#ifdefs in any sane way. Also, add a HitFlushDCache op to the
"locoresw", and fill it in as appropriate (it's NULL on MIPS-I,
so watch out).
These changes ensure that my R4600 Indy (with 2-way cache) gets
the correct cache ops when the kernel is built with only MIPS3
support, resulting in a kernel that is significantly more stable.
2001-06-11 23:52:38 +00:00
df452bb9b8
clean up some comments, per a request from sommerfeld
2001-06-11 22:56:26 +00:00
1825c7b68a
Move defopt FOOTBRIDGE to where it really should be in files.footbridge, which is where I should have left it.
2001-06-11 22:25:09 +00:00
ed72dec945
Remove locore dependancy on opt_netwinder and use the netwinder define from the command line.
2001-06-11 22:08:42 +00:00
8d1b187a4c
Fixed pte_print to display the correct names
...
for VME device pages.
2001-06-11 21:35:59 +00:00
6e5f704918
Now use hand-defined macros instead of relying
...
on structure layout to find registers. Added
a VME attachment.
2001-06-11 21:33:47 +00:00
0463a8a3d7
Replace magic numbers in trap code with offsetof()
...
Deal better with traps during register restore.
Explain a bit more about what's going on here.
2001-06-11 20:04:02 +00:00
bd73477f94
Parentheses around definition of PODULE_GAP.
2001-06-11 19:07:14 +00:00
95be56d2e1
Only include dependency on include-dirs if the include directory doesn't
...
exist.
2001-06-11 17:50:34 +00:00
ba4b09844f
Use command Makefile.arm. Move non-std LOADADDRESS to std.netwinder. Add
...
netwinder-specific inclusion Makefile.
2001-06-11 17:46:23 +00:00
d87a9f23c3
Add common Makefile for arm ports. Only include (for now) machine/io.h
...
if arm32 is defined. io.h is RISCPC specific and isn't needed for other
ports.
2001-06-11 17:44:38 +00:00
3d85ba9ab2
include-dir: A relative 'S' is up 4-levels.
2001-06-11 13:49:28 +00:00
afd5ba073b
Defopt FOOTBRIDGE.
2001-06-11 13:48:28 +00:00
c522c18479
Use NFB from "fb.h" to include console framebuffer support.
2001-06-11 13:34:51 +00:00
bf3fad1043
Split consinit functionality out of machdep.c into platform-specific
...
files. G/c include files for machdep.c
Only include dev/cninit.c in ofw-based kernels.
2001-06-11 11:56:57 +00:00
712d37e53b
G/C an unused parameter to isrdispatch_vectored().
2001-06-11 11:26:42 +00:00
9b0b23c664
Stack adjustment for autovectored interrupts wasn't quite right...
2001-06-11 11:24:40 +00:00
b20634eca1
Footbridge files have moved from arm32 to arm sub-tree.
2001-06-11 10:51:09 +00:00
43b992855b
Comment about start address of LED unit in vr4122.
2001-06-11 10:04:27 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
c1922a2158
not set HPCFB_SWAP_BYTE.
2001-06-11 09:21:15 +00:00
1c426d533e
make GENERIC compile again.
2001-06-11 06:11:01 +00:00
48a9b87617
Move some struct definition into header file.
2001-06-11 06:04:55 +00:00
79524e25e0
- add comment about start address of PMU in vr4122.
...
- wrap long line.
- add regsiter offset found in PMU of vr4122.
2001-06-11 06:02:21 +00:00
d011344fca
Cosmetic changes; lineup some struct members.
2001-06-11 05:56:21 +00:00
1898d1dcc6
- make this file compile even if either hpcfb or vrkiu isn't included.
...
- introduce new cpp symbol VR_FIND_DRAMLIM not to probe dram beyound this.
for example, MP-C303 hangs hard if memoy beyond 0x03800000 is probed.
2001-06-11 05:52:21 +00:00
f81775f030
Cosmetic changes.
2001-06-11 05:24:06 +00:00
2bcc128c2b
Print space after colon.
2001-06-11 05:22:10 +00:00
3dabdff631
Cosmetic changes:
...
- Use tab instead of many spaces
- options<SPC><TAB>
2001-06-11 05:17:45 +00:00
49ba960b09
make this compile with DEBUG.
2001-06-11 04:58:33 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
83e47d5e8d
Revision line #1 broke, fixed.
2001-06-10 20:47:49 +00:00
b47f638d85
Check in work done by bjc@openbsd.org, OpenBSD revs 1.4 and 1.5 of the
...
same file. No other changes, OpenBSD log messages below.
> More EMODD work:
> - Using CVTDL and subtracting to seperate integer from fraction does
> not work if the integer is >32 bits long; instead, rearrange the bits
> into a quadword, use ASHQ to truncate, and then subtract.
>
> Also:
> - Set the condition codes properly; this fixes the other problem with
> >32-bit-integer parts in libm by letting modf subtract the fractional
> part (which *is* a double) to get the integral part in a double.
> - move the zero checks earlier in the routine
>
> - instead of 'ret' in zeroexit, use brw goback
> Switch a "BGTR foo" to a "BLSS bar; BRW foo; bar:". In this case, the
> difference between the BGTR and foo: is too large for a byte displacement.
> as should give an error or at least a warning here, but it doesn't;
> instead it merrily outputs a completely bogus displacement.
> This fixes problems with EMODD on numbers with negative exponents.
>
2001-06-10 20:46:18 +00:00
e29b0f085f
.type xxx,@function isn't supported under COFF
2001-06-10 19:06:26 +00:00
179dd3e579
sigh. It also helps to switch back to .text ...
2001-06-10 17:31:38 +00:00
b55c21bb0d
Copy in segment descriptors all at once rather than one at a time.
2001-06-10 17:30:41 +00:00
8561123ccf
-Wreturn-type is included in -Wall.
2001-06-10 17:05:11 +00:00
08fb0e543b
Pick the right bit to check...
2001-06-10 17:03:01 +00:00
8aad61265b
On 162 and up, get the CPU speed from the firmware and only fall back
...
to calculating it on the fly if the firmware's value is bogus.
This fixes problems caused by rounding errors on some board/speed
combinations.
2001-06-10 16:48:19 +00:00
aab2376d45
Refuse to boot on 162/172 and 167/177 if the user has not removed
...
the jumper which tells 1xx-Bug where to locate its scratch data.
Instead, print a message informing the user to RTFM (which needs to
be updated to include this info. ;-)
2001-06-10 16:45:52 +00:00
a3496ef8a8
When invoking the pcb_onfault mechanism, pass the return value of uvm_fault()
...
to the onfault routine.
2001-06-10 16:31:59 +00:00
29d06d028c
Fix printf format error.
2001-06-10 15:54:05 +00:00
7f2d136a9a
Remove options NMBCLUSTERS=1024 -- it's default now.
2001-06-10 15:41:13 +00:00
b736ff678e
Use machine/bat.h rather than powerpc/mpc6xx/bat.h.
2001-06-10 15:32:57 +00:00
afa0c16167
include powerpc/mpc6xx/bat.h.
2001-06-10 15:24:57 +00:00
bedfcf904c
libkern.h is included in systm.h. Not needed here.
2001-06-10 15:05:44 +00:00
89546c98a1
Enable DHCP and BOOTP as supported diskless NFS boot options.
2001-06-10 14:40:47 +00:00
967e648941
Use the versions of dev_net.[ch] in libsa in order to get DHCP support.
...
In other words, mvme68k's "netboot" finally supports DHCP.
2001-06-10 14:12:48 +00:00
8b0b4ecd3f
Forgot to commit this; s/offb/ofb/.
2001-06-10 13:56:13 +00:00
ea5249214a
Add rnd(4) pseudo-device.
2001-06-10 13:16:07 +00:00
9d87ee4b59
add MC-R700, 730 touch panel parameter
2001-06-10 12:37:43 +00:00
4911bdc582
Use ofb_softc again.
2001-06-10 11:38:21 +00:00
5a051092e4
Rename ofb_softc to ofbus_softc. (XXX Is this good name?)
2001-06-10 11:36:03 +00:00
f6482742de
pte_spill -> pmap_pte_spill.
2001-06-10 11:09:28 +00:00
6650a1901e
Use the new pmap to compile again (sorry).
2001-06-10 11:07:36 +00:00
fafb5d4bc3
Make the new pmap optional. Use the old (stable!) pmap by default.
2001-06-10 11:01:26 +00:00
53e9189ae7
oops; non-primary cpus should still spin, not jump to idle.
2001-06-10 10:50:20 +00:00
27c2892f13
Enable color! call in ofb_putcmap again.
...
Matt, please don't remove codes silently without confirmation.
(At least, leave a log message!)
2001-06-10 10:34:27 +00:00
be7629b7e0
Hand off intr evcnt responsiblity in a reasonable way on the 5064.
2001-06-10 09:28:26 +00:00
7c074dc806
Check in work-in-progress of generic ISA interrupt support. The
...
goal here is to get the P-5064 PCMCIA slots working, and serve as
the basis for P-6032 interrupt support.
PCMCIA interrupt auto-detection not working -- more work to be
done here.
2001-06-10 09:13:06 +00:00
82418a77b0
Add PCMCIA devices.
2001-06-10 08:45:09 +00:00
66822e55be
Fix a spl issues. Turn on PMAPCHECK until instability problems are found.
...
Add a pmap_pvo_verify call you call it from it ddb and verify the pmap
data structures are sound. Fix warnings when DEBUG was turned on.
2001-06-10 07:56:36 +00:00
b9ef9e99da
Print a more informative is a uncatchabl DSI or ISI exeception happens in
...
kernel mode.
2001-06-10 07:49:13 +00:00
1930cfd7dc
Correct for a data structure change.
2001-06-10 06:17:15 +00:00
ce66bf0803
Rewrite the interrupt handling code:
...
- Compute the number of CPU pipeline cycles per second using the
mc146818.
- Use the COMPARE interrupt for the hardclock interrupt.
- Collapse all interrupt priorities into a single priority, and use
the CPU interrupt inputs to determine the interrupt source (local
device, PCI device, ISA device, etc.)
This allows us to have interrupt sharing.
2001-06-10 05:26:58 +00:00
0e82abb5de
Add MIPS3_5200.
2001-06-10 05:02:33 +00:00
b1db1fba38
Adapt to new PowerPC pmap.
...
Use more common PowerPC code including bus_dma and unified bus_space.
2001-06-10 03:16:29 +00:00
c97896cd4d
Pull avail_start/avail_end logic for bus_dmamem_alloc() from macppc port,
...
as suggested by matt@netbsd.org--the vm_physmem array may not be in order.
2001-06-10 02:31:25 +00:00
a2b115fa4c
Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
...
from 512/256.
2001-06-10 02:28:57 +00:00
ce17af0c82
Very crude changes to ensure we never call malloc passing M_WAITOK from
...
pmap_enter. Instead, we panic if allocation fails. This is bad, and should
be reworked.
2001-06-09 12:22:11 +00:00
b0a79f686c
Typo police: 28285 -> 21285
...
Also garbage collect the old kernel VM map defines for footbridge.
2001-06-09 10:44:10 +00:00
4c30449347
Remove the old kernel config files for cats, also remove isa_cats_machdep, as
...
it now lives in cats/isa/isa_machdep.c
2001-06-09 10:35:55 +00:00
af8ce95972
Move the footbridge dir out of arm32 into arm.
2001-06-09 10:29:11 +00:00
3cad96a936
Move towards common Makefile.arm
...
Add a netwinder/autoconf.c
2001-06-09 05:38:23 +00:00
e27941e917
Eliminate some unavailable devices on netwinder.
2001-06-09 05:36:28 +00:00
bfddba9825
Separate podule and netslot cases in poduleread() into separate functions,
...
with the correct one referenced by a pointer in the podule structure. This is
in aid of eventually making the netslot and podulebus code a little more
separate from one another.
2001-06-08 22:38:07 +00:00
9e26feedf2
Finish off the cats arch dir by creating an include dir and populating it from
...
arm32/include.
Make use of std.cats in the kernel config.
Fixup files.cats so it actually works.
2001-06-08 22:22:59 +00:00
ca2047f7c6
Adapt the dtide driver to the MI podulebus framework, and move it to its new
...
home. It still doesn't actually work, but that's a SMOP.
2001-06-08 20:13:24 +00:00
cca6e28421
Added comments and fixed some macros now that I correctly
...
understand how to address the sun2 VME bus in the VM hardware.
2001-06-08 18:00:51 +00:00
1375a0c31e
don't run SMP flush routines if (cold); be sure cpus[n] is valid.
2001-06-08 16:25:04 +00:00
72c1d9df6d
more SMP work: finish up ipi's, SMP DDB support, cpu startup issues, and
...
idle() u area issues:
in nmi_sun4m(), if this is a soft NMI and DDB is configured, setup a trapframe
and pass it to nmi_soft(). in cpu_hatch(), spin until our cpu's flags no longer
have CPUFLG_STARTUP set. then, setup registers and jump to
idle_enter_no_schedlock. in idle(), if MULTIPROCESSOR, always switch to this
cpus idle u. a minor optimisation to cpu_switch().
2001-06-08 16:15:23 +00:00
37c37861b9
Make sure to always re-sync the rx buffer dmamap if recycling the
...
rx buffer.
2001-06-08 14:32:05 +00:00
aa2443e7c8
if DDB, when pausing, save a copy of this cpus registers while paused.
2001-06-08 09:51:40 +00:00
67fc8c19be
if MULTIPROCESSOR, make the registers virtual, so that we can access other
...
processors registers. rework enter/exit ddb code to look more like the i386
code. make "mach cpu" and "mach cpu N" work.
2001-06-08 09:49:28 +00:00
7666800896
need a per-cpu ddb_regs pointer.
2001-06-08 09:45:50 +00:00
1ae283fcdd
use raise_ipi_wait_and_unlock().
2001-06-08 09:40:31 +00:00
e3b20fd18d
options PROG32 for now.
2001-06-08 06:16:09 +00:00
85656841a3
Change _ARM32* to _NETWINDER* Include <machine/psl.h> to get psl
...
definitions.
2001-06-08 06:14:25 +00:00
1f4156858b
add an include subdir rule in the Makefile to make netwinder use the
...
"new" include file structure to be used on arm ports.
2001-06-08 06:13:02 +00:00
7c77092fcf
Change options<tab> to options<space>
2001-06-08 06:10:40 +00:00
68e8e6ff9c
make this compile again.
2001-06-08 05:43:00 +00:00
7bb4cfc2db
split {sunos,svr4}_sigcode out for LKMs
2001-06-08 04:49:45 +00:00
soda