http://mail-index.netbsd.org/tech-kern/2007/11/09/0001.html
sysmon_envsys_create() and sysmon_envsys_destroy() were added to
create/destroy sysmon_envsys objects (and its TAILQ/LIST for sensors/events).
sysmon_envsys_sensor_attach() and sysmon_envsys_sensor_detach() were
added to attach/detach sensors to a specified sysmon_envsys device.
The events framework is now per device and configurable via the
ENVSYS_SETDICTIONARY ioctl or /etc/envsys.conf and envstat(8).
Update all users and documentation to reflect these changes.
MHz value as suggested by Alan Barret (apb@).
While I'm here make it report the correct type, it should be PC2 not PC
for DDR2.
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 800MHz, PC2-6400
spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 2.50ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR2 SDRAM memory, no parity or ECC, 1024MB, 667MHz, PC2-5300
spdmem1: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
This does NOT identify the devices, merely indicates the
presence of devices at certain addresses. Tested on ichsmb
and nfsmb - other SMBus devices will need to ensure the
proper bus type is set. (I2C_TYPE_SMBUS)
From Nicolas Joly, via Paul Goyette, in PR#36744.
the eeprom on common types of memory modules. The specifications are
displayed during boot and can later be queried in the hw.spdmemN sysctl
subtree. Stub driver written by Nicolas Joly and greatly improved upon by
Paul Goyette. From PR 36745, with additional improvements by Paul and me.
(Part 2: drivers)
* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.
Tested by:
blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).
Add support for the 128kbit, 256kbit and 512kbit parts. Note issues
with the 1024kbit and larger parts, but don't add support for them at
this time. I've not updated with the explosion of part numbers in
this family.
