with pk:
Use dev/rcons/files.rcons in the pmax config file.
Use "rasterconsole" as the tag in pmax/conf, and modify the pmax
framebuffer pseudo-device drivers (fb and rcons) to us rasterconsole.h and
RASTERCONSOLE for compile-time configuration of the rcons pseudo-device.
Modify the pmax rcons pseudo-device driver to initialize a little-endian,
QVSS-compatible font (set its ascent, and set the rconsole structure to
point to that font) before calling rcons_connect().
Tested on a cfb. The ascent may be wrong (or at least, not be aligned with
the hw cursor sprite) on a 3100.
Integrate patches from der Mouse (8-bit cleanliness, FULLSCREEN option,
SMALLFONT option).
The (MD) caller of rcons_init() is now responsible for initialising `rc_font'.
translated geometry of the disk. This code will only change the
disk geometry if it can find a geometry which is consistent with
all partition entries, so it's very conservative about choosing
a new disk geometry. Under some circumstances, it will choose a
number of cylinders which is a little lower than it needs to be,
but this code is enough so that you can create new partitions
with the correct physical addresses.
The right solution to this problem is to have the boot loader
communicate the BIOS geometry of each disk to the kernel, in a
manner similar to the symbol table, and then provide a kernel
interface to get at that information. I'm unfortunately not
really qualified to make such a change, and I want something
that works better than the status quo.
* Reset the card on "fresh open" as a sanity measure.
* Use the "secret bit" to enable interrupts.
* Make some parts look/behave like their cousins in dev/isa/com.c
* Set the FIFO threshold based on line speed.
* Be a little more informative when port is attached.
* Implement TIOC{G,S}FLAGS; ttyflags now works.
First two items prevent deadlock on some systems (notably the 380,
425, and 433) which some people have been reporting. Use of the
"secret bit" seems to be safe on systems which don't need it. Changes
tested on a 319, 340, 345, and 380.
* Implement TIOC{G,S}FLAGS; ttyflags works now.
* Reset the card on a "fresh open" as a sanity measure.
* Make dcmopen() and dcmclose() a little more like the
corresponding routines in the new dca.c
chopps