eb9736c09a
Add uscanner.
2000-11-14 19:52:04 +00:00
e3ae93dfd4
Add hfs support. Currently this layer simply throw the request to the OF
...
(and the OF recognizes HFS).
2000-11-14 11:25:34 +00:00
0ba0592864
Pull in dev/i2o/files.i2o.
2000-11-10 17:09:15 +00:00
eef7148644
Enable HID0_BTIC on 750 and 7400.
2000-11-09 11:58:09 +00:00
a88f368787
defopt L2CR_CONFIG.
2000-11-08 17:53:46 +00:00
10c4684193
Use wdc_print_modes() so that we get to see what DMA modes
...
are used with a drive.
2000-11-08 17:50:44 +00:00
4feeea4377
Reduce maxusers to 12 (this is a single user kernel after all).
...
Remove COMPAT_13 since it's not needed.
2000-11-07 17:37:07 +00:00
c62b76ce87
Switch from the old yucky ncr to the new good siop driver for 53c8xx.
2000-11-07 17:01:33 +00:00
532d1c33c2
Enter ddb after ddb_init() if -d is specified.
2000-11-06 12:35:21 +00:00
7bfead48b0
Rearrange console selection code.
...
Now usb keyboard is preferred to adb.
2000-11-06 12:33:07 +00:00
5a55a6ac60
Add files.ieee1394
2000-11-05 23:19:41 +00:00
029bdd3185
Adjust to change in tty line discipline handling.
2000-11-03 18:50:49 +00:00
3d213115f4
Don't match if nintr > 12 (more than 3 cells).
2000-11-03 12:26:06 +00:00
bcb05a2f55
Get 6 interrupt cells from OF.
2000-11-03 12:20:55 +00:00
2fe4478f19
Don't assume 12x22 font.
2000-11-02 14:25:51 +00:00
8c3f6a0d10
Adapt to new line discipline scheme.
2000-11-02 00:37:56 +00:00
08e43d95ca
Don't set M_HASFCS flag twice.
2000-11-01 20:21:58 +00:00
204e210aef
Enable DDB history by default.
2000-11-01 06:57:56 +00:00
94abfa5119
Actually attach the audio device...
2000-11-01 05:28:09 +00:00
e964414bc8
(Oops. There's no other audio support in this config.)
2000-11-01 04:34:41 +00:00
105e2e4e4d
Add awacs.
2000-11-01 04:31:20 +00:00
b4b571ccb9
Match "chrp,mesh0".
2000-10-31 16:57:07 +00:00
51d748392f
Switch to sys/dev/md_root.c. Tested on an INSTALL kernel.
2000-10-29 01:39:19 +00:00
784da8d158
Use "doze" power-saving mode on 750 and 7400.
2000-10-28 21:57:43 +00:00
b7c07855f6
make -> ${MAKE}
2000-10-28 15:41:25 +00:00
251bc81879
Change ofwboot entry address to 0x600000.
2000-10-24 12:18:33 +00:00
756f954ef1
Fix Conner CFP1080 problem (pr 7612) and add debugging messages.
2000-10-23 21:04:27 +00:00
b30ca78c9b
Packets have the FCS append so set M_HASFCS.
2000-10-18 05:43:13 +00:00
03251ccf07
Pass correct packet length to the upper layer.
2000-10-17 15:57:51 +00:00
5d6a22ffea
Use VNODE_OP_NOINLINE.
2000-10-14 19:14:06 +00:00
07a9408ae6
Move ofwboot to 600000 hex. Should make loading better (less likely to
...
run into OF internals).
2000-10-13 00:19:30 +00:00
2824f4906d
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
...
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
442b9b5df2
Get the correct OF node of the screen because PowerBooks have two screens
...
in one PCI device.
2000-10-01 19:08:30 +00:00
cdb3d9df80
Add sip* at pci.
2000-09-29 14:45:59 +00:00
e256cfb9ec
Fix a bug that prevents the kernel from detecting the root device.
2000-09-29 10:14:20 +00:00
3ef92f0bdb
Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
...
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
ccf1c822a6
Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
...
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
5836de14e4
Fix a bug introduced in BOOT_FLAG change.
2000-09-24 16:16:37 +00:00
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
49c105ffdb
add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
...
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00
e9a2baa2ff
Grab a major # for USB scanners.
2000-09-23 04:30:08 +00:00
72a24b4eae
Add an align argument to uvm_map() and some callers of that
...
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
a0cf020afb
Configure L2 cache if it is not enabled by the firmware.
2000-09-12 14:47:38 +00:00
dfcd3bca08
On G3 and G4, display short message if L2 cache is not enabled.
2000-09-05 15:29:28 +00:00
2e72bb2b72
Add fr key layout. (From Manuel Bouyer, modified by me)
2000-09-01 16:00:38 +00:00
f671e87235
Add an argument to need_resched macro.
2000-08-28 11:52:59 +00:00
077c9ca312
Enable hash filter mode.
2000-08-28 11:27:44 +00:00
308d7eb3e4
Add (experimental) awacs audio driver. Output (play) only.
2000-08-25 12:44:42 +00:00
4678e2bb87
Correctly spell DRIVER. Noted by Tsubai. :-)
2000-08-23 19:15:25 +00:00
5558e41363
New PowerBook (firewire) seems to use edge-triggered interrupt.
...
XXX cannot hot-plug yet
2000-08-23 12:18:17 +00:00
58e7a6954b
Add spllock(). See spl(9) for details.
2000-08-22 19:46:26 +00:00
365ec2aa42
Scheduler locking changes.
2000-08-21 18:46:03 +00:00
23a7f255d4
Make sure we provide splsched() as described in spl(9).
2000-08-21 02:06:31 +00:00
31ec486214
Correct asm parameter to avoid gcc uninitialized warning.
2000-08-20 07:48:45 +00:00
1267826d5d
Increase stack size.
2000-08-20 07:04:59 +00:00
58aaeaae7f
In decr_intr(), update lasttb only when clock interrupt is not masked.
2000-08-20 07:02:41 +00:00
d832bf8e95
Add "type" argument to openpic_enable_irq().
2000-08-20 06:56:42 +00:00
17c0d4d853
Add some new partition types, and flags. Have the Apple Partition Map
...
code ignore the new partition types, and look for the new "USR" partition
flag.
From SUNAGAWA Keiki <kei_sun@ba2.so-net.ne.jp> with slight changes by me.
Closes PR port-macppc/10046
2000-08-18 22:40:28 +00:00
85dda25e94
move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
...
as it is no wthe default setting for everyone.
the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
eef346a5ec
Don't try to change subordinate bus number if pchb != grackle (for now).
2000-08-02 09:02:46 +00:00
43b5c0039c
Enable rnd.
2000-08-01 08:23:37 +00:00
5f1e746912
Remove duplicated entry 22 in chrtoblk table.
...
Pointed out by Greg Kritsch on port-macppc mailing list.
2000-07-30 07:17:27 +00:00
46ab3e89fb
Use libsa alloc().
2000-07-25 06:26:18 +00:00
dd54c272e5
Add ofwboot.{mrg,xcf} to CLEANFILES.
2000-07-25 06:22:05 +00:00
8dc7633036
Make this compile again.
2000-07-25 06:18:23 +00:00
13f68a994d
Enable console in initppc().
2000-07-25 05:44:27 +00:00
7cf89e2181
Allocate temporary buffer to copy OF page table dynamically
...
rather than static variable.
2000-07-25 05:41:30 +00:00
e651decb55
We don't need to include the # VIA VT82C686A integrated AC'97 Audio as it
...
is integrated into the Southbridge on a number of i386 motherboards - we
won't be seeing that in a mac. :-)
2000-07-25 02:33:30 +00:00
a6d6bce652
Add a bunch of pci audio drivers. Most are commented out as they haven't
...
been tested on macppc. But I tested the eap for playback and it's fine.
2000-07-25 01:39:22 +00:00
a943e81da4
Delete kernfs.
2000-07-24 10:04:10 +00:00
20933708ec
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:42:25 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
500013914e
Make timebase frequency value adjustable.
2000-07-14 05:53:31 +00:00
fba6fe287b
* Redo previous; set PIR on 604 and 7400 only.
...
* printf clean-up.
2000-07-08 07:23:17 +00:00
446c144ae3
Set PIR only if MULTIPROCESSOR is defined.
2000-07-07 13:22:06 +00:00
059d5818cf
include "opt_multiprocessor.h".
2000-07-06 23:27:29 +00:00
9ad1103d98
Make it compile with "options MULTIPROCESSOR".
2000-07-06 22:56:22 +00:00
db5c144019
make sure ofwboot.xcf gets installed
2000-07-06 19:42:55 +00:00
73db3f2b79
First attempt to spin up the secondary processor on 180MP and 200MP.
...
XXX Need more work.
2000-07-05 16:02:38 +00:00
b513be4daa
s/#include/include/
2000-07-04 22:25:06 +00:00
168faa04b6
Oops.. Forgot to grow chrtoblktb[]. Pointed out by tsubai.
2000-07-04 05:48:36 +00:00
a5c13f9ad4
Kwality control:
...
* put #includes of opt headers and headers to get protos used by
net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
netisr_dispatch.h (pc532) to use it.
2000-07-02 04:40:33 +00:00
cbb53d3ebd
Add audio, midi, and sequencer devices. Copied from ports alpha and i386.
...
Note: this does not mean internal audio's working. :-( It means I'm trying
to get my eap card to work.
2000-07-01 21:25:11 +00:00
d738f90fd7
raise MSIZE from 128 to 256.
...
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
2000-06-30 17:55:11 +00:00
d76ae83df8
add PULLDOWN_TEST for all the platforms.
...
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
28d898391b
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-29 08:10:45 +00:00
e695f72a2e
Add <machine/int_types.h>, which provides namespace-pure definitions
...
of exact-width integer types.
2000-06-26 15:42:16 +00:00
4c698e84f6
<vm/vm_param.h> -> <uvm/uvm_param.h>
2000-06-26 14:58:58 +00:00
2f159a1bac
remove/move more mach vm header files:
...
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
889c658b5b
Change the kernel mmap interface so that the offset to map is an
...
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
2000-06-26 04:55:19 +00:00
1ee7d22c0b
Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.
2000-06-22 20:27:49 +00:00
1155f3af58
Allow mmap of frame buffer registers.
2000-06-19 19:35:20 +00:00
ce3ea53415
Remove "options NFS_BOOT_BOOTPARAM" to fit 1.4M floppy.
...
(still have NFS_BOOT_DHCP)
2000-06-17 21:44:46 +00:00
96964a6455
Use ether_crc32_le().
2000-06-16 14:18:55 +00:00
2931ec17b7
Forgot to commit this.
2000-06-15 19:09:15 +00:00
736d4273e2
Implement multicast address filter. (Stolen from hme.c)
2000-06-15 18:36:52 +00:00
223d7455c7
Remove the obsolete config fragments for kernel crypto, because the IPsec
...
crypto code is now in the kernel source tree.
2000-06-14 22:02:13 +00:00
232461e6be
Add TLP_MATCH_*. Remove gm*.
2000-06-11 23:29:29 +00:00
1bfa0fc6b6
Add cpu_counter().
2000-06-11 16:32:42 +00:00
94db0b8a37
Enable DMA transfer on obio IDE.
2000-06-11 10:56:16 +00:00
521233859b
Add cy* at pci.
2000-06-09 17:14:06 +00:00
dd703bc6f8
Add cy.
2000-06-09 17:11:30 +00:00
3d410a6c74
Add commented-out entry for Cyclades-Z pci serial ports.
2000-06-09 16:57:37 +00:00
a7bea09941
Add support for Cyclades-Z PCI tty's.
2000-06-09 16:56:51 +00:00
a29bb9db7b
Add all RAM regions to battable.
...
This should support > 512MB memory. (untested, though)
2000-06-09 10:54:48 +00:00
649f6d3838
Sync with mac68k.
2000-06-08 22:10:45 +00:00
d3336b64a1
Squeeze a few more bytes so the INSTALL kernel will fit on a floppy.
...
Use tlp instead of de. Add in gm[ac]. Remove slip and Gallant 22x12 font.
Compile ofwboot.elf -Os.
2000-06-08 17:35:47 +00:00
4c15219d3b
* Access hardware directly in zscn* instead of calling OF.
...
* Clean up.
2000-06-07 17:37:07 +00:00
4371d91433
Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater
...
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
2000-06-05 07:59:50 +00:00
cffb580806
Implement the more flexiable `evcnt' interface as discussed (briefly) on
...
tech-kern and now documented in evcnt(9).
2000-06-04 19:14:14 +00:00
dca520b4a6
Add fixcoff so an obj dir can be created
2000-06-01 18:33:43 +00:00
c9aff328d9
Make booted_device global (and booted_parition for consitency).
...
Eliminate it from header files and other extern definitions.
2000-06-01 00:49:49 +00:00
47449a63d2
kill __P in these files. (I had to look at them anyway with an eye for
...
adding some protos... and adding them with __P seems wrong, but mixing
__P and not __P in the same file seems wrong too, so...)
2000-06-01 00:04:50 +00:00
8c2d00aaeb
Add a comment about needing to initialize p_cpu when multiple
...
processors are supported.
2000-05-31 05:09:14 +00:00
a7d0570e67
First sweep at scheduler state cleanup. Collect MI scheduler
...
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
2000-05-26 21:19:19 +00:00
8964c35eca
Introduce a new process state distinct from SRUN called SONPROC
...
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
2000-05-26 00:36:42 +00:00
56dfe42d8d
Add epic* at pci.
2000-05-26 00:22:06 +00:00
4a42668b31
Add fxp* at pci.
2000-05-25 09:09:28 +00:00
06d1fe06b3
Remove __BROKEN_DK_ESTABLISH.
2000-05-23 13:27:16 +00:00
f12221a5f5
Modify DMA access timings.
2000-05-23 13:20:58 +00:00
071aed40ac
A foolish consistency; most parts of the kernel use bp->b_data, so
...
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
2000-05-19 18:54:22 +00:00
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
9f48bba3ae
Add "install" target, so "make install" after building the kernel
...
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00
6a33c86623
HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
...
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.
2000-05-09 00:32:19 +00:00
3a6e3a4670
Add (sometimes commented out) MIIVERBOSE option.
2000-05-08 13:49:44 +00:00
26d692df9e
Use DHCP, not BOOTP. At least with dhcpd, the root path gets dropped due to
...
lack of space in the reply when using BOOTP.
2000-04-29 22:18:31 +00:00
f51470a514
Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
...
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
2000-04-29 03:31:45 +00:00
151b83e2e1
Add ex* at pci and rtk* at pci.
2000-04-25 16:05:06 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
7865e586d3
Typo in comments. (Zilog 8350 -> 8530)
2000-04-14 13:29:57 +00:00
dd83a9aa4f
Make this compile.
2000-04-14 10:22:06 +00:00
2ca39ceddf
Make this compile again.
2000-04-07 14:35:58 +00:00
9a31a8c77f
Add atapibus* at umass?
2000-04-03 00:03:28 +00:00
b18b370715
Make sure color rgb:0/0/0 is black.
2000-04-02 12:53:05 +00:00
7df13bfec7
Enable wdc1 (needed on StarMax).
2000-04-02 12:36:38 +00:00
e352cada4b
Make this compile again.
2000-04-02 12:03:04 +00:00
230876cf26
Merge parts of chs-ubc2 into the trunk:
...
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
2000-03-26 20:42:21 +00:00
ffdaae73e0
Enable gmac ethernet.
2000-03-26 09:16:01 +00:00
f8a898cb1d
Use ring buffer on tx side, too.
2000-03-26 09:15:17 +00:00
5684221bbd
esp declaration was moved to conf/files.
2000-03-26 08:34:20 +00:00
d806694e39
Fix typo.
2000-03-26 08:29:12 +00:00
b7570cae85
Update several ports to at least work again without IPKDB
...
after the update of that.
Sorry for breaking this with my last changes :-(.
Fixes PR#9671 by Lennart Augustsson.
2000-03-24 17:05:30 +00:00
7b918b4088
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 06:40:33 +00:00
7c35662066
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.
2000-03-22 00:58:16 +00:00
e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
0bcbafe0ee
Correct the number of arguments to wsdisplay_set_cons_kbd(), for the
...
changes I made for cnbell().
2000-03-09 18:59:27 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
30370336dc
Use ring buffer on tx side, too.
2000-03-04 11:17:00 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
0468fe97e4
Don't use hardcoded speed value when this is a console. Instead, read
...
from zs. (because OF-3.x uses 57600 bps)
2000-02-27 20:31:57 +00:00
f101e8315f
Add gmac. (commented out)
2000-02-27 18:06:43 +00:00
6f4bb03178
Initial version of gmac ethernet driver.
...
XXX doesn't work well yet.
2000-02-27 18:00:55 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
0b8b55beaf
Add uninorth. Now iMac DV and Power Macintosh G4 should run NetBSD.
2000-02-14 14:57:52 +00:00
2750c23cdd
Add minimal support of openpic.
2000-02-14 12:45:52 +00:00
2aafd71ec7
Reduce NKMEMPAGES_MAX_DEFAULT.
2000-02-13 17:01:47 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
d696094217
Change ICU_LEN to 64.
2000-02-11 13:15:43 +00:00
1dc2d9d399
Don't display "NetBSD disklabel". This message appears too many times
...
if more than two or three disks exist.
2000-02-10 12:33:45 +00:00
502ad73200
Add wsfont options.
2000-02-09 13:10:15 +00:00
dcb9f03bd3
Use dev/rasops instead of dev/rcons.
2000-02-09 13:08:35 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
a62753d0b7
Make OF-2.x can also find root device.
2000-02-08 20:02:13 +00:00
b933f19ea2
Flush cache before rebooting to preserve msgbuf.
2000-02-08 12:57:11 +00:00
d97ae29629
Enter power saving mode in idle loop on 603, 750, and 7400.
...
603 uses doze mode, 750 and 7400 use nap mode.
2000-02-08 12:49:06 +00:00
9cba8a13d1
Use -Os -mmultiple to reduce size.
...
Add cbb and pcmcia/cardbus devices.
Nuke BUFPAGES=800 kludge.
2000-02-08 12:13:50 +00:00
c7d216c2da
Add missing locators.
...
Add tlp at cardbus.
2000-02-08 12:10:56 +00:00
45fe0e4077
Fix typo.
2000-02-08 08:08:43 +00:00
b9ff560bcc
Don't print "... not configured" message for non real devices
...
like escc-legacy.
2000-02-07 20:30:05 +00:00
cf532aa7eb
Move CFLAGS and CPPFLAGS to {bootxx,ofwboot}/Makefile to compile installboot
...
without -D_STANDALONE.
2000-02-07 16:26:59 +00:00
c343256107
Make the new findroot code work on PowerMac 9600 (OF-1.0.5).
2000-02-04 18:29:15 +00:00
6bfa70b9c6
Remove an unused variable.
2000-02-04 07:48:11 +00:00
a09eb087b6
Treat "chaos" like a bandit.
2000-02-04 03:40:42 +00:00
e29a886cd6
* Split bandit and grackle.
...
* Add UniNorth support.
Now pcibus is attached like:
bandit0 at mainbus0
pci0 at bandit0 bus 0
...
2000-02-03 19:27:43 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
9cf3b29a57
Make the device_register code work on machines with multiple PCI bridges
...
with the same bus number (like the new G4s). Also, don't hardcode the
size of the pci_bridges array.
2000-02-02 16:41:56 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
33051e5117
Use device_register to find the boot device more reliably. Should now work
...
on anything it's possible to boot from that we have a driver for.
2000-02-01 04:04:17 +00:00
22a3504708
Make this work on the G4 too.
2000-01-27 17:39:20 +00:00
ecd94f5ee0
s/NUMODEM/NUCOM/
2000-01-27 15:41:19 +00:00
8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
14bc6c9eb8
Add PHYs.
2000-01-25 14:43:49 +00:00
6b26a49ee9
Use MII device layer.
...
XXX still 100Mbps receive side is very slow...
2000-01-25 14:38:39 +00:00
85fcd0b58d
Update for the ucom(4) addition.
2000-01-25 08:31:56 +00:00
05ceaaaad5
Add UniNorth.
2000-01-25 07:19:11 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
7b49d242ce
Clean up the machine symlink stuff ever so slightly. Needs to be
...
standardized between files.
2000-01-23 17:04:03 +00:00
969c226b5b
Match "keylargo".
2000-01-23 10:01:44 +00:00
2d0426d8d2
Recognize MPC7400.
2000-01-21 18:49:52 +00:00
16ea7fbbbb
Match "keylargo-ata".
2000-01-21 18:45:14 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
augustss