b543578236
Add a missing "nop" in a delay slot in the floating-point exception
...
handler. Gradual underflow and fp emulation now work correctly.
Proper denorms also fix strtod() inaccuracies and Gcc's "enquire" program.
1995-09-28 20:02:50 +00:00
d7992eb61f
Update to correct load address.
1995-09-28 08:13:29 +00:00
d73008fe8b
Always announce it when loading miniroot.
1995-09-28 04:17:24 +00:00
b1d771eeb5
Simplify nubus interrupt routines a bit.
1995-09-28 04:11:18 +00:00
a9f0a2f9c4
Fix PR 1514 from Walter Ruetten.
1995-09-28 03:15:54 +00:00
691b9f2bfa
Avoid reading the filesystem superblock in bootxx; all info now prepared
...
by installboot (per Gordon Ross).
1995-09-27 09:03:13 +00:00
5a0bebbc54
Patch from Theo to finish clearing 040 kernel page tables.
1995-09-27 04:16:54 +00:00
232169396a
Bullet-proof a little.
...
Make some more pdma code conditional on USE_PDMA.
Handle transfers of size > MIN_PHYS.
1995-09-27 03:38:57 +00:00
995b4710b8
Correct mapinfo for Multibus PROM devices.
1995-09-26 21:30:19 +00:00
50201d2bb5
Fix comment, add copyright.
1995-09-26 21:29:25 +00:00
03fa08025b
Major update: Many changes from Matthias Pfaller.
...
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
not splx, but rett is now used to reenable CPU interrupts when leaving the
interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000
1995-09-26 20:15:57 +00:00
b3ecc4c310
make sure devopen() sets pd->devtype properly when BOOTXX is defined
...
(should be DT_BLOCK). otherwise the bootxx boot block will fail if
you are on a system with a v2 openprom [because it will not do the
v2_seek in obp_strategy()]. fixes the problem recently noted on
the port-sparc list by matthew green <mrg@eterna.com.au>. i tested
fix on a ss2 with a v2 prom.
1995-09-26 20:07:53 +00:00
3c868e07f9
New DVMA interface, and various cleanup.
1995-09-26 04:01:53 +00:00
48fc6c37a0
Correct child_return() so child is charged for its cpu time.
1995-09-26 03:53:46 +00:00
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
f28ebc66ca
Fix SCC bug that broke getty on pmax SCC lines: if RAW and LITOUT were
...
both off, haracters with their top bit clear were interpreted as a delay.
This (strange) behaviour is still available if SCC_PARITY_MEANS_DELAY
is defined.
1995-09-25 22:10:56 +00:00
95a27d405b
Update pmax kernel to compile with -Werror:
...
update MAXINE desktop bus driver to pass a softc to interrupt
handler. The softc is still statically allocated.
1995-09-25 21:12:33 +00:00
ed4d846a84
Update pmax kernel to compile with -Werror:
...
Add prototypes to the driver switch for old-style 4.4bsd/pmax device drivers
(i.e., the old pmax SCSI drivers).
1995-09-25 21:10:03 +00:00
51d59ca152
Update pmax kernel to compile with -Werror:
...
Fix the initializer of the prom bootinit() function, to take a char* that's
(presumably) the name of the file to boot -- even though it's not used.
1995-09-25 21:06:29 +00:00
cd887a9930
Add "kvtophys()", which maps MIPS R2000 kernel-virtual addresses to physical addresses,
...
so they can (e.g.) be written to DMA mapping registers.
1995-09-25 20:36:23 +00:00
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
06bd2712e9
Update pmax kernel to compile with -Werror:
...
Update TURBOChannel and ioasic interrupt-establish routines to pass on their
device argument as a "void *", since that's how all the pmax interrupt handlers
are declared.
1995-09-25 20:33:26 +00:00
25563b1f82
add config info for "xy" xylogics 450/451 driver
1995-09-25 20:27:30 +00:00
8d19642cd6
add "xy" xylogics 450/451 config stuff
1995-09-25 20:20:27 +00:00
1779adf6be
minor cleanups:
...
- don't let pcyl go unassigned if we have a non-sunos disklabel.
if nothing else, guess pcyl = ncyl + acyl.
- don't use bogus disklabel data if disk label is invalid
(xdgetdisklabel() now returns if label was ok or not).
- move xddriver decl. before start of actual code (cleanup).
1995-09-25 20:12:44 +00:00
2aff99a206
bug fix: xddummystrat() was clearing all but B_BUSY when it should
...
have been clearing just B_BUSY (s/B_BUSY/~B_BUSY/). this
fixes hard hang when reading disklabel when booting system.
minor clean up: added a few prototypes and only fool with bootpath
if booting the system (in xdattach).
1995-09-25 16:02:09 +00:00
27361456c5
Force a delay after calling SCC_WRITE_DATA() to give the chip
...
registers time to settle. DELAY(2) is reportedly enough. Without the
delay, output characters are occasionally doubled.
1995-09-25 04:30:43 +00:00
7bb66692c0
Add fine-grain clock code which uses the 25 MHz TURBOChannel bus-cycle
...
counter on 5k/240s to interpolate to microsecond-resolution clock
in microtime(). Only the "rev B" ASIC in 5k/240s is known to have
this counter; other models may or may not. This gives microsecond
resolution at user-level, and up to 40ns resolution (modulo the
nominal 5(?) 40MHz cpu cycles for reads to complete) in the kernel.
Change the IOASIC reset function to set up the DMA mapping for the
53c94. Allocate 16 Kbytes of DMA buffer for 53c94 ASCs under an IOASIC,
as the 3MAX baseboard and TC options have 128 Kbytes of static
bounce buffer, and the drivers really _should_ support 16Kbyte
I/O requests. (They don't always.)
Give the LANCE a hard reset on 5k/240s, just to be on the safe side.
(the 5k/240 I use sometimes reported errors at boot time.)
1995-09-25 04:21:01 +00:00
462ef77234
Use the new "struct rconsole"; changes I apparently forgot to commit with
...
pmax/dev/fb.c.
1995-09-24 23:13:00 +00:00
825bd034de
Move pseudo swap block device to major 4 to make way for `xy'.
1995-09-24 20:45:27 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
a33b9f4fdb
Assume primary swap is `b' partition, not `root partition + 1'.
1995-09-24 02:18:11 +00:00
4408ec71bf
init bad144 table before we actually try and read anything from the
...
disk, rather than init'ing after reading block 0 [in case we get an
error reading block zero].
1995-09-24 00:27:59 +00:00
44561deb01
Add support for the FX-card - Falcon mem. extension - (Nat!)
1995-09-23 20:31:21 +00:00
7af927b56d
Make sure the prototypes and inline definitions are included.
1995-09-23 20:29:16 +00:00
afea10f476
Correct mapping for new (iso-8859-1) fontsets (Thomas Gerner).
1995-09-23 20:27:15 +00:00
f28a41635b
Make them compliant to iso-8859-1 (Thomas Gerner).
1995-09-23 20:25:34 +00:00
c150cc4d37
PROF -> GPROF
1995-09-23 20:23:28 +00:00
e44fc4282e
Use -msoft-float as suggested by Gordon Ross.
1995-09-23 20:22:01 +00:00
3810bc32eb
Compile the system installation program and install it in /usr/mdec/rbootd
...
as SYS_INST.
1995-09-23 17:40:54 +00:00
a8c323442d
Add a standalone system installation program. Currently implements:
...
* Prompt user for disklabel information and label disk.
* Copy miniroot image from NFS server to `b' partition.
* Boot kernel in miniroot image into single-user mode.
Hooks for tape support are there, but the meat for that isn't implemented yet.
1995-09-23 17:38:51 +00:00
a35f639de0
If compiled for the system installation program, prompt for myip, gateip,
...
netmask, serverip, and path rather than using rarp/bootparam.
Catch up with libsa changes.
1995-09-23 17:31:10 +00:00
d429f2e11f
Re-arrange a mite; for the system installation program. Catch up with libsa
...
changes.
1995-09-23 17:28:11 +00:00
188f6e6912
Add *close() routines. Basically, zaps softc structure so that partition
...
information will be re-loaded upon next open.
Catch up with libsa changes.
1995-09-23 17:19:58 +00:00
b8e9fb1b0b
Catch up with libsa changes.
1995-09-23 17:17:03 +00:00
2572267bae
relocation_info added.
1995-09-23 14:57:40 +00:00
96163f6aa5
fix typo
1995-09-23 13:42:03 +00:00
40a6506694
add memcpy entry
1995-09-23 08:14:36 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
13d9b9d700
Sync up with the sparc version.
1995-09-23 03:40:28 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
21f7aa38f6
Update the pmax rcons pseudo-device driver to work with the sys/dev/rcons
...
version of rconsole.
1995-09-22 23:48:20 +00:00
7ed7d6148f
Move the C struct to the properly protected place.
1995-09-22 23:19:30 +00:00
42662e7b9c
Need <sys/mount.h>
1995-09-22 15:29:33 +00:00
f03897c2b6
"Oops." Get the declaration of sys_arch() correct.
1995-09-22 15:27:10 +00:00
d1234038d4
Rename the force-all-pending-writes to memory function to wbflush().
...
Keep the old Mach-derived name "MachEmptyWriteBuffer()" as an alternate
entry point.
1995-09-21 23:28:31 +00:00
7c36f209e7
Need <sys/mount.h> now.
1995-09-21 22:26:04 +00:00
fc919965e8
Make sunos_sigreturn() match prototype.
1995-09-21 11:41:04 +00:00
01be7f2b8c
Need sys/mount.h for fhandle_t.
1995-09-21 11:27:43 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
ddf9c6da16
Add 4 vnds to each, add 4 ccds to GENERIC, update BASALT to match
...
current reality.
1995-09-21 07:27:52 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
b895726b5c
MACCCLASSIC is Color classic. And it's more like an LC than hopeless.
1995-09-21 01:56:31 +00:00
0641f09bfb
Include <sys/mount.h>, as the new <sys/syscallargs.h> won't compile without it.
1995-09-20 23:33:25 +00:00
de36f970fb
Fix a few oversights. From Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
1995-09-20 13:03:21 +00:00
2991316b06
Remove unecessary references to arch/sparc/rcons/raster.h, and some other lint.
1995-09-20 05:36:13 +00:00
3589d052f0
Add gory debugging, because I don't have access to a MAXINE to test
...
the baseboard framebuffer driver with rcons and it reportedly didn't work.
1995-09-20 05:19:54 +00:00
d0c0f7f738
Fix initialization of MAXINE xcfb as console.
1995-09-20 05:13:06 +00:00
df58dc7d89
Change the signature of interrupt-handlers to take a void *
...
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-20 04:33:00 +00:00
3253873a9e
Use `files.ultrix'
1995-09-20 00:25:44 +00:00
03c87b6ebc
Use `files.osf1'
1995-09-20 00:20:18 +00:00
a11f0c987e
Compile kernel with -Werror and -fno-builtin.
1995-09-19 23:57:55 +00:00
970f736653
Compile the kernel with -Werror -fno-builtin.
1995-09-19 23:54:29 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
ad05d707bf
Compile the kernel with -fno-builtin.
1995-09-19 23:34:06 +00:00
2d61359f60
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:33:12 +00:00
5ac5b98a9c
Compile the kernel with -Werror and -fno-builtin
1995-09-19 23:32:21 +00:00
065ee11549
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:30:54 +00:00
a7417b3ca6
Compile the kernel with -fno-builtin.
1995-09-19 23:28:06 +00:00
b903d705da
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:26:58 +00:00
bca85a86b1
Compile the kernel with -fno-builtin.
1995-09-19 23:25:29 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
516ddf511f
Wrap only the message in ifdef DIAGNOSTIC.
1995-09-19 03:18:15 +00:00
c030fa6ef2
Install in /usr/mdec
1995-09-18 23:33:42 +00:00
aa41c30406
Don't strip bootxx on installation.
1995-09-18 23:32:41 +00:00
4025edc861
Make this compile again by calling readdisklabel() with a dummy strategy routine.
...
XXX - need some reorganization to this from xdopen().
1995-09-18 23:26:39 +00:00
371dd67d56
sync filesystems just prior to writing the bootblocks to the raw device.
1995-09-18 22:36:19 +00:00
974115eb54
Adapt to libsa changes & some other minor nits.
1995-09-18 21:31:44 +00:00
05f929580f
read superblock into &sblock rather than LOADADDR. we can't read
...
into LOADADDR because it can't be mapped into DVMA space. this fixes
a dvma panic on a sun4 boot from an xd disk.
1995-09-18 20:24:53 +00:00
24ba08adca
Fixed RELOC's to be hex numbers (as expected) rather than decimal.
...
(e.g. s/340000/0x340000/). Fixes DVMA panic on my sun-4/280 when
booted diskless.
1995-09-18 19:52:15 +00:00
909842fb1f
Correct jClkNoMem address for C650 from
...
nick@csua.berkeley.edu via Walter Ruetten.
1995-09-18 13:55:09 +00:00
e8dbcda856
Do not define MIN_PHYS here--it is m.d..
1995-09-18 13:52:43 +00:00
cb5010a4fe
Fix a spelling slight. Grab the faulting address if nofault in bus error.
1995-09-18 13:51:25 +00:00
927d165081
Optimize the via interrupt processing routines a tad. From
...
chas@ohm.nrl.navy.mil (Charles J. Williams).
1995-09-18 03:15:43 +00:00
c8a3bfd5ed
Update files.pmax to use Ted Lemon's port of the sparc rcons glass-tty fb
...
driver, the "generic" fb pseudo-device driver, and dev/cons.c.
Update an example new-config file (NEWCONF) to use them.
1995-09-18 03:09:03 +00:00
9e925a1b42
Add cdevsw and bdevsw entries for the machine-independent sd and st drivers.
...
Add cdevsw and bdevsw entries for the old-pmax tz SCSI tape driver, and
add a do-nothing definition of the requisite tzdump().
1995-09-18 03:04:53 +00:00
e18d468a1a
move DEC qvss/pm - compatible (kernel tracks mouse) mouse-input parser
...
to qvss_compat.c Move low-level mouse initialization to lk201.c.
1995-09-18 03:01:22 +00:00
6d9de6f768
Fix qvss/pm compatible ioctl to set colormap entry.
1995-09-18 02:57:31 +00:00
cb4eb50b28
Change HwCfgFlags4 to something a bit more mnemonic.
1995-09-17 21:28:33 +00:00
f447526366
vmes => vmes0
1995-09-17 21:11:13 +00:00
11f1ea06af
These files have moved to sys/dev/rcons.
1995-09-17 21:08:25 +00:00
2c523b5941
Remove rcons lines.
...
Add cgtwo.
1995-09-17 21:03:36 +00:00
30150218f5
Add cgtwo0.
1995-09-17 21:02:56 +00:00
c5bc107461
cgtwo framebuffer, cloned from cgthree.c and sun3's cg2.c.
...
Note: untested, shall be considered a framework to get things started..
1995-09-17 20:53:43 +00:00
c92d076f5b
Change interface to th `fb' pseudo device to not need the major device
...
number (a la sun3).
Put in new glue for rcons.
1995-09-17 20:43:39 +00:00
b89096d14f
Remove all rcons related stuff from `fbdevice'; this is now defined in
...
dev/rcons/rcons.h.
1995-09-17 20:41:30 +00:00
1c8c505974
Fixes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to avoid panic()s when we read the PRAM values while ROM
vectors are missing.
1995-09-17 18:51:40 +00:00
b528dcf5c2
Fix from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to prevent his last changes from causing a panic if some
values are not filled in in the ROM vector table.
1995-09-17 18:50:17 +00:00
c4250f7102
Add rom vector for LCIII from Peter Kohler (kohler@ife.ee.ethz.ch)
...
via Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
1995-09-17 05:22:57 +00:00
a32163f292
Correct some prototypes.
1995-09-17 00:50:54 +00:00
f97c30e5fe
Network booting; "oldmon" support; combine all functionality in single images.
...
Many thanks to Gordon Ross and Chuck Cranor for figuring out and testing
the old monitor (sun4) stuff.
1995-09-16 23:20:22 +00:00
a106882a85
Only use PIO instead of PDMA if DRIVER_NOINT.
1995-09-16 18:22:33 +00:00
3579b04cac
Obsolete when not using Microvax rom anymore.
1995-09-16 16:21:56 +00:00
c378250058
Calls to MicroVAX rom routines removed.
1995-09-16 16:20:18 +00:00
34373365cb
Add minimal dumpfile support.
...
Fix a bug in pt_enter_ptpage which caused MMU faults on low-mem conditions.
Change siop drivers to better handle sync.
Remove diag. done for ide -- its redundant as the ROM does similar.
fixed ite_filter to not panic if typing before the device is fully setup
All thanks to osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-09-16 16:11:03 +00:00
67abd74816
struct rpb -> include/rpb.h
1995-09-16 15:58:57 +00:00
01c7626f80
Load microcode file on 11/750.
1995-09-16 15:54:20 +00:00
864f186a4e
Use MAN instead of MAN8 (although it doesn't matter here because vgaio
...
is neither built nor installed).
1995-09-16 15:52:38 +00:00
6e9c7ee5a8
Use MAN instead of MAN3 and MAN5
1995-09-16 15:49:40 +00:00
64a23e9a8b
Take care of xon/xoff (== discard them).
1995-09-16 15:48:49 +00:00
ee21163cab
moved up one level in directory structure
1995-09-16 15:47:27 +00:00
7bffdf561e
Removed bug to prevent division-by-zero when accessing unlabelled disks.
1995-09-16 15:43:25 +00:00
ccaff4431c
Simplify doboot().
1995-09-16 15:35:05 +00:00
ea4e385abd
Map in the VIA space for the bloody Mac II ROMs that directly reference
...
a hardware address. Also map in the ROM space before we call doboot().
1995-09-16 15:33:54 +00:00
6ed4261a1b
Fix segment table reference bug (from Michael Hitch).
1995-09-16 15:09:28 +00:00
a8b0260a05
Sync. with atari ncr5380.c -- mainly whitespace changes.
1995-09-16 15:06:55 +00:00
dff8e2275e
Fix segment table reference bug (Michael Hitch)
1995-09-16 14:18:09 +00:00
a2a0fe9c66
- Handle devices that do not support identify messages (Allen Briggs)
...
- Add pdma_ready() hook (Allen Briggs)
- Increase timeout to 1000 (Matthias Pfaller)
1995-09-16 14:15:10 +00:00
395e73a5d7
ka650 added. Converted to KNF.
1995-09-16 13:34:20 +00:00
ed3a9bf3b0
TMSCP support added.
1995-09-16 13:18:27 +00:00
eefa8685a2
Bootblock support for tmscp added, used on MicroVAX.
...
MicroVAX rom routines not used anymore, too inconsistent when
not using FILES-11 filesystem.
1995-09-16 13:01:06 +00:00
b5733df6fb
Standalone support for TMSCP tapes, based on ra disk driver.
1995-09-16 12:57:35 +00:00
7e902b634e
Foolish and easy standalone prog to edit disklabels.
1995-09-16 12:56:03 +00:00
8feecb9503
Rick Macklem's copy hack that can do standalone (multi-)volume
...
copies from anything to anything.
1995-09-16 12:53:49 +00:00
214a1bac9f
Fixes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
to use ROM routines to read and write PRAM times, etc..
1995-09-16 12:35:53 +00:00
bee931c117
Set timezone to 0. The booter's GMT bias should be used, instead.
1995-09-16 12:33:06 +00:00
2e06f3f2bb
More changes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
for correct handling of timezones and PRAM <-> system time conversion.
1995-09-16 12:31:13 +00:00
007a539df5
Readme & install files added and updated.
1995-09-16 12:00:19 +00:00
4dc81200f5
Rename scsi_main_irq() to pdma_ready().
...
Missed a few ATNs in last patch. (pointed out by Leo).
Raise timeout from 100 to 1000. From Leo.
1995-09-16 11:45:18 +00:00
008afe8e46
Replace the old 4.4bsd/pmax framebuffer glass-tty font with one
...
suitable for the NetBSD/sparc-derived "rcons" framebuffer glass-tty.
1995-09-16 02:05:11 +00:00
048e948791
As Leo pointed out, my last change was not safe. This one should be.
...
I added two new bitfields to ncr_softc. They flag which devices have
been selected, and which ones have failed to go to message out when
selected with ATN. If a target fails to go to message out the first
time it is selected, it goes into the latter bitfield. If it fails
thereafter, we treat it as we did before.
1995-09-15 01:52:18 +00:00
a0d6a95720
indentify.
...
Bring in a few changes from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de ).
Assume that PRAM time - GMT bias (set in the booter) is the current time
in UTC.
1995-09-14 23:44:12 +00:00
db43cabe32
Re-instate configuration print routines, following Chris' suggestion.
...
Only prints something if there's no scsi bus to attach.
1995-09-14 20:38:53 +00:00
8acf48ade5
update comment to include Etherexpress.
1995-09-14 12:46:42 +00:00
1b34b69c93
Gah... The Asante SCSI/ethernet box doesn't answer the ATN request
...
for a 'MESSAGE OUT' phase, so add support in scsi_select() for the
phase to be either 'MESSAGE OUT' or 'COMMAND'.
1995-09-14 02:54:05 +00:00
d8ab74fcf2
Honor new MACH_CLASSIIvx.
1995-09-14 02:49:11 +00:00
13c1f2d48b
Shuffle MACH_CLASSes around a tad and add IIvx as a seperate class because
...
it may have a different method for accessing the 'via2' functions.
1995-09-14 02:48:09 +00:00
9c61c22d66
Clean up message a tad.
1995-09-14 02:43:51 +00:00
d7b9b56e07
Rename the old pmax SCSI driver's "struct scsi_device" to
...
"struct pmax_scsi_device", to avoid name conflicts with the sys/dev/scsi
SCSI driver.
1995-09-13 19:35:53 +00:00
f47d026fb3
Fix cosmetic typo in kernel name prompt.
1995-09-13 18:52:39 +00:00
a0b0b167c1
Include the new fbio.h, fbvar.h, and lk201.h header files introduced
...
with rcons, as dtop.c supplies keyboard and mouse input from the desktop
bus, even though it hasn't itself changed.
1995-09-13 07:46:03 +00:00
d69221cacc
Delete the definition of struct VDACregs (the registers of a Brooktree
...
bt478 vdac); it's now in bt478.h.
1995-09-13 05:46:02 +00:00
18a11cecc7
Update a comment.
1995-09-12 22:52:08 +00:00
f5dc3f3d83
Fix bug (introduced by passing sc's rather than unit numbers) in the
...
computation of cfb interrupt-reset address for the 3MIN's interrupt routine.
1995-09-12 22:36:09 +00:00
d8dc3d91c0
Update for Leo's changes.
1995-09-12 22:31:45 +00:00
851669ceab
cleaned up bootpath code:
...
- v2 openprom disk boot generates "/sbus/esp/sd@3,0" which we translated
into "/sbus@0,0/esp@0,0/sd@3,0"... this caused esp.c to reject
the bootpath because it was looking for sbus slot/offset 0,0.
changed the code to generate "/sbus0/esp0/sd@3,0" to fix this
panic.
- when generating fake boot paths, generate them with unit numbers
rather than slot/offsets (thus, /obio@0,0 becomes /obio0, as
does vmel and vmes).
- fixed up comments to reflect these changes
tested new code on: 4/280 (diskless), 4/360 (diskless), 4/360 ("xd" disk),
4/370 (scsi disk), ss1 w/v1 openprom (diskless),
ss1 w/v1 openprom (scsi disk), ss2 w/v2 openprom (diskless),
ss2 w/v2 openprom (scsi disk).
1995-09-12 22:03:02 +00:00
1ae7af5b59
Updates from Leo's changes in the atari port.
1995-09-12 21:20:18 +00:00
639f90ef6e
Update from Leo's changes.
1995-09-12 21:05:58 +00:00
e34d65cb12
- Fix a timing bug in the loop, that was introduced in the previous version.
...
- Added some code to reject unsupported messages correctly.
1995-09-12 19:58:53 +00:00
b216a24d04
Rename the 4.4bsd/pmax framebuffer glass-tty console structs to
...
"struct pmax_fbtty". Remove most of its fields, since the fields
in the struct fbinfo render most of them unecessary, and the pmax
now uses rcons anyway. Moe the lk-201 keycode definitions to lk201.h,
so rcons can use them too.
1995-09-12 07:51:35 +00:00
6a072ce81d
Remove the old cdevsw entries for cfb, mfb, xcfb and pm framebuffers.
...
Add an entry for the generic framebuffer "fb" pseudo-device, which
should be used instead of the hardware-specific drivers.
1995-09-12 07:43:58 +00:00
2f387d871a
Change the signature of interrupt-handlers to take a void *
...
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-12 07:32:31 +00:00
ab85287371
Correct a typo in the PROM id string of the sfb in sfb_match().
1995-09-12 07:30:45 +00:00
45d06a39e5
Change the signature of interrupt-handlers to take a void *
...
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-12 07:28:06 +00:00
f261206292
Add entry for MAXINE xcfb baseboard framebuffer to the MAXINE
...
turbochannel configuration table.
1995-09-12 07:27:07 +00:00
9a914b5b01
Rename the Decstation 2100/3100 interrupt functions from "pmax_<func>"
...
to "kn01_<func>", to avoid confounding a model name (PMAX) with the name of the
entire port (pmax).
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
Pass softc pointers to the scsi and ethernet kn01 (DS_PMAX) drivers,
rather than having unit numbers wired into the base-level interrupt
handler.
1995-09-11 22:03:00 +00:00
6746e9f52e
Rename the Decstation 2100/3100 interrupt functions from "pmax_<func>"
...
to "kn01_<func>", to avoid confounding a model name (PMAX) with the name of the
entire port (pmax).
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
Move consinit() from here to cpu_cons.c.
Eliminate the old old pmax-specific console driver, whcih didn't
know about vnodes. Use sys/dev/cons.c instead.
Delete the old 4.4BSD/pmax TURBOChannel probe routines and ROM-to-driver
name-mapping functions.
1995-09-11 21:58:23 +00:00
eefb5e8d1b
Rename the old 4.4bsd/pmax old-style config "struct device" to
...
"struct pmax_device" to avoid conflict with <sys/device.h>.
Move the glue routines for config.old pmax SCSI device probing from
autoconf.c to conf-glue.c.
1995-09-11 21:49:37 +00:00
187de8a215
Change pmax rcons and low-level serial drivers to support the
...
old-style pmax polled input for cn_getc(). Needed because the
input side of rcons is not initialized in time for GENERIC kernels
to use it to read a root/swap devicename from /dev/console.
Fix an argument glitch between consinit() and pminit().
Change consinit() to use PROM output for remote consoles, because
the serial drivers aren't yet initializable when consinit() is called.
1995-09-11 21:37:24 +00:00
b4100ef220
Fix argument glitch between pminit() and consinit().
1995-09-11 21:31:25 +00:00
f8fbfa0ce8
Change pmax rcons and low-level serial drivers to support the
...
old-style pmax polled input for cn_getc(). Needed because the
input side of rcons is not initialized in time for GENERIC kernels
to use it to read a root/swap devicename from /dev/console.
1995-09-11 21:29:23 +00:00
dec12b783d
Initialization and keymapping code for DEC LK-201 and successor keyboards,
...
abstrated out of the pmax scc and dc7085 drivers.
1995-09-11 21:23:07 +00:00
92ec4c2ebb
Delete the now-unused 4.4bsd/pmax "struct consdev". NetBSD/pmax
...
now uses the standard NetBSD console driver.
Add definition of RCONSDEV, a potential framebuffer console device major
number.
1995-09-11 21:20:20 +00:00
9d7c17bfcb
We have no need for `esp_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there. Returning -1 is an error
anyway as noted by Chuck Cranor.
1995-09-11 19:41:21 +00:00
0a5ab32e3d
We have no need for `si_print()'; the only child we expect is a `scsibus',
...
and there's nothing to say if it isn't there.
1995-09-11 19:35:06 +00:00
5bf0d8e4fa
`si' and `sw' are scsibusses.
1995-09-11 19:20:12 +00:00
23366c17ff
Rename the old 4.4bsd/pmax old-style config "struct device" to
...
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-11 08:29:11 +00:00
30c1021fd5
Framebuffer state variable for Ted Lemon's generic-framebuffer "fb"
...
pseudo-device, with support for the qvss/pm - compatible interface
used by X11R5 servers on DEC framebuffers.
1995-09-11 08:18:51 +00:00
d20d3cf520
Framebuffer ioctls for Ted Lemon's pmax generic framebuffer fb
...
pseudo-device.
1995-09-11 08:17:04 +00:00
ba769a296d
Register definitions for the TURBOChannel Smart Frame Buffer (sfb).
1995-09-11 08:14:16 +00:00
c8bef84d72
*** empty log message ***
1995-09-11 08:11:20 +00:00
1d976e39b9
Change pmax framebuffer drivers to use Ted Lemon's port of the
...
NetBSD/sparc rcons glass-tty console pseudo-device driver, via
the "fb" generic-framebuffer pseudo-device driver.
Individual framebuffer device drivers are now autoconfig glue,
and initialization code for a set of vdac/ramdac-level methods,
called "fbdriver", that's used by all the pmax device drivers.
All the handlers for user-level requests (open/ioctl/read/write/close)
are moved into the fb pseudo-device driver, which uses the
the "fbdriver" methods to work on any given pmax hardware driver.
Framebuffers supported are: sfb cfb mfb xcfb pm.
Move the qvss (pm) -style mmap()ed device interface, kernel tracking
of mouse button/movement events, and placing mouse/keyboard
events in an mmap()ed ring buffer, out of the framebuffer device
drivers and into separate source files. The fb pseudo-device driver
uses the qvss-compatible interface, since that's what the (R5) X
server uses.
1995-09-11 07:45:36 +00:00
ef09db9674
Add a memcpy() entry as suggested by Gordon Ross. Use <machine/asm.h>
...
where appropriate.
1995-09-10 19:42:17 +00:00
c08d930690
Get address of buffer right when returning from graphics mode.
1995-09-10 10:45:16 +00:00
43279db68d
Fix PR #1445 (incorrect ifdef/else/endif), from Bill Sommerfeld via
...
John Kohl.
1995-09-08 07:57:15 +00:00
df2f99818a
Get notion of VT number right.
1995-09-07 21:55:43 +00:00
f269c3f49e
Fix bug when the second argument of va_start was a char, short or float.
...
(ie. not promoted); fixes PR# 1193. Thanks to Bernd Ernesti and Markus
Wild.
1995-09-07 01:20:15 +00:00
bac2393fb0
Probe config registers correctly.
1995-09-06 12:35:38 +00:00
896097d846
Fix `le' faked bootpath (PR#1438, Rolf Grossmann).
1995-09-05 21:46:04 +00:00
60a7c4c394
Add `sw' scsi adapter on obio (per Jason Thorpe, PR#1422).
1995-09-05 21:43:09 +00:00
0f14e95f52
replace bogus tcl with tch, thanks to briggs
1995-09-05 15:07:05 +00:00
c91abc3e61
Remove infinite loop per Leo and Mycroft.
1995-09-05 11:21:34 +00:00
7640742d5b
Fix possibly endless loop (mycroft) and add fix requested by Allen Briggs.
1995-09-05 07:02:21 +00:00
1b8c8d3906
Fix broken VT_WAITACTIVE ioctl (from pcvt 3.30, needed for Linux
...
svgalib binaries).
1995-09-04 22:33:21 +00:00
eb9d1db57a
Right align color values in the bytes.
1995-09-04 19:41:39 +00:00
eee0dbbda7
Allow chars > 0x7f to be displayed on the ite's
1995-09-04 19:39:21 +00:00
75dfa4a054
Add memcpy entry as suggested by gwr.
1995-09-04 19:37:45 +00:00
c392350cba
sbic and board changes from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-09-04 13:04:40 +00:00
4be2a61f7f
mmutype fix from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-09-04 12:56:47 +00:00
b04e172458
Rename a `xxx' function.
1995-09-04 09:53:53 +00:00
19a99aa395
Get softc as parameter in interrupt function, using new changes from
...
via.[ch]
1995-09-04 05:07:16 +00:00
129ca2cea9
Make VIA2 interrupts pass an argument in and let the scsi_register_*_intr
...
functions use that, too.
1995-09-04 05:05:58 +00:00
4f76655592
Fix a goof in the latest changes.
1995-09-04 05:05:11 +00:00
02883e7341
Remove an extra "talk" command--from Ken Nakata <kenn@remus.rutgers.edu>
1995-09-04 02:50:57 +00:00
003751356c
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422). Also includes
...
bootpath glue (PR#1414) (this needs finishing off in disksubr.c).
1995-09-03 22:21:27 +00:00
8bdbf4be70
Update from Jason: eeprom device needs 8-bit access.
1995-09-03 21:55:36 +00:00
af6e3d03cf
Add data structures used to interface to the monitor-resident drivers.
1995-09-03 21:36:06 +00:00
86d6e121cd
Add support for Extended Apple Mouse Protocol from
...
Ken Nakata <kenn@remus.rutgers.edu>.
1995-09-03 20:59:53 +00:00
b394d7fc7d
Enable ADB interrupts unconditionally if not using setup_egret().
1995-09-03 20:47:21 +00:00
de4100b643
Clean up a bit.
1995-09-03 14:54:31 +00:00
761b3a8340
Clean up some.
1995-09-03 14:51:38 +00:00
30c554fc9d
Changes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
...
This forces the need for booter version 1.8.
1995-09-03 14:37:16 +00:00
745cb60f16
Note that this is now an obsolete driver.
1995-09-03 03:39:38 +00:00
e9a9533544
Make the new m.i. scsi driver the default.
1995-09-03 03:37:32 +00:00
166af00381
Make a local copy of the atari m.i. scsi driver sources for the time
...
being. Some people aren't supping arch/atari and this allows those
people to get the sources.
1995-09-03 03:36:35 +00:00
b8b9c4c9ff
Make sure vt_coldinit() is always called before vt_coldmalloc().
...
Remove pcvt_kbd_raw.
1995-09-03 01:20:33 +00:00
fcdfdcb926
Fix missing clock-ticks in child after fork as suggested by cgd & Allan Briggs.
1995-09-03 00:44:43 +00:00
7c55f97d9b
Really batting 1.000 today...
1995-09-03 00:07:21 +00:00
231db77094
Fix thinko in netboot-related changes.
1995-09-02 23:36:09 +00:00
4eb595b1d2
Fix missing clock-ticks in child after fork as suggested by cgd & Allan Briggs.
1995-09-02 19:44:45 +00:00
a7783604fd
Optimize this some. Still seems slower than it ought to be.
...
Register interrupt functions with via.c.
Clean up somewhat. Turn off DEBUG.
1995-09-02 19:29:42 +00:00
4ed102bbd4
Optimize accesses to VIA2 a bit.
...
Force SCSI driver to register interrupt functions and remove default
handlers.
Bring in a few changes from
Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>--more to come later.
Define VIA interrupt functions as returning void, not long.
1995-09-02 19:27:34 +00:00
42d7c233d5
Very minor cleanup.
1995-09-02 05:44:07 +00:00
9f203a792f
Weren't quite ready for the last change.
1995-09-02 05:41:12 +00:00
e60752e507
Rearrange a bit.
1995-09-02 05:35:59 +00:00
acdc651ece
Add support for network booting; uses the following procedure:
...
rbootd->rarp->bootparam->nfs
Add "reset" option to disk and network boot prompts to reload boot code.
1995-09-02 05:04:14 +00:00
a23346b0d5
Grok booting from the network.
1995-09-02 04:54:06 +00:00
aa213636df
Example configuration for a diskless hp300.
1995-09-02 04:39:51 +00:00
bee422d998
DTRT. This should be considered the base version of the file.
1995-09-02 03:19:37 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
9b3308eeec
Enable writing of disklabels (Many thanks to Jason Thorpe, Gordon Ross
...
and Matthew Green).
1995-09-01 17:19:50 +00:00
b6fb219037
Process via2/rbv interrupts from low bit to high bit.
1995-09-01 04:10:11 +00:00
e46e8e7a57
A first pass at a scsi driver based on the Atari ncr5380{reg.h,.c} code.
1995-09-01 03:43:49 +00:00
2c7359091d
Patches from Ken Wellsch/Ken Lalonde to support some Dilog MSCP cards
...
(DQ256 SMD card, SQ706A and SU726A SCSI card).
1995-08-31 22:24:39 +00:00
10101d52ba
Only define some vars (one of pcvt-specific type) when pcvt is configured.
...
Fixes PR #1424 (from Mike Long)
1995-08-31 09:33:10 +00:00
d3930dd627
In child_return(), pass oticks of 0 to userret() instead of p->p_sticks to
...
avoid slighting the child of a timer tick if it gets one after starting.
Thanks go to cgd for noticing this.
1995-08-31 03:22:55 +00:00
f9399fadc7
add option CON_BRK_PANIC to be able to force a panic by 3 consecutive
...
breaks without any input on the console port.
1995-08-30 23:51:40 +00:00
0324e91dae
Remove VT-switch disabling hack now that pcvt handles this.
1995-08-30 00:32:51 +00:00
9fc36ab1a4
* Don't scroll by setting the CRT start address when in graphics mode, and
...
make sure to use the right buffer (fixed in the same way as pcvt 3.30)
* Maintain keyboard state locally per VT. This makes sense, enables switches
between VTs with different kbd states, and aids Linux VT emulation.
1995-08-30 00:29:09 +00:00
b1ae3d7339
Garbage collect.
1995-08-29 23:09:29 +00:00
7a84d590e0
Add bwtwo@obio specs (from Jason Thorpe).
1995-08-29 22:50:36 +00:00
022e1038fd
Use pc532 specific in_cksum.c.
1995-08-29 22:48:02 +00:00
3564c1fcc2
More changes to ncr driver to try to get it working. (From Matthias Pfaller)
1995-08-29 22:44:27 +00:00
d9c05825be
Changes for gdb from Matthias Pfaller.
1995-08-29 22:37:41 +00:00
bc5b188714
Define bwtwo at obio & vme (from Jason Thorpe).
1995-08-29 22:28:07 +00:00
a4e214aef0
If we're the console, say so in attach message.
1995-08-29 22:26:37 +00:00
a159e45699
Support for sun4 (from Jason Thorpe).
1995-08-29 22:20:01 +00:00
15c28bc39a
Sun4s must set baud rate on the mouse port (from Jason Thorpe).
1995-08-29 22:15:35 +00:00
f9777fe9ef
Export `eeprom_va' (from Jason Thorpe).
1995-08-29 22:13:19 +00:00
6f1f25d6ed
Export `eeprom_va' so drivers can peek at the configuration (from Jason Thorpe).
1995-08-29 22:11:58 +00:00
jonathan