0dd1fb3d17
regen
2003-09-23 18:32:12 +00:00
7e40a36c7f
catch up with sys___sigaction14 compat_16 rename
2003-09-23 18:31:03 +00:00
b1a13994b7
When the syscall was made a compat syscall and the function name
...
changed to compat_16_sys___sigaction14, the name of the _args
structure chaged as well.
2003-09-23 17:59:48 +00:00
f0d728e698
Avoid a type punning warning in the MALLOC_DEBUG case.
2003-09-23 16:36:59 +00:00
5a2aac1c7c
Fix a typo that prevented pre-ata drives from working since 1999.
2003-09-23 16:27:10 +00:00
847c5ca1c6
More changes following this pattern:
...
#ifdef __FreeBSD__
/* FreeBSD-ism */
#else
/* NetBSD-ism */
#endif
2003-09-23 16:03:46 +00:00
20a915d375
Put FreeBSDisms in #ifdef __FreeBSD__, and add the equivalent
...
NetBSDisms.
2003-09-23 16:01:21 +00:00
608fc21500
Make ieee80211_unref_node compile.
...
#ifdef __FreeBSD__ a lot of lines, and put the NetBSDisms into the #else
half.
Add ieee80211_node_{dec,inc}ref to ieee80211_node.h.
2003-09-23 15:59:09 +00:00
1c4de65baa
Make if_printf more nearly match FreeBSD's, and make it compile.
...
Remove ieee80211_node_{dec,inc}ref (they go to ieee80211_node.h).
2003-09-23 15:57:25 +00:00
dc98452dce
Copy PCI codes for IBM405GPx from evbppc/walnut/pci/{pchb.c,pci_machdep.c}.
2003-09-23 15:30:22 +00:00
03467d74b5
Add devices info for IBM405GPR.
2003-09-23 15:26:46 +00:00
91be153592
Add global cpu_model variable.
2003-09-23 15:25:26 +00:00
e20e959b37
Copy IBM4xxGPx specific autoconf code from evbppc/walnut/autoconf.c.
2003-09-23 15:24:15 +00:00
a8dd07e005
Copy IBM4XX OpenBIOS locore.S from evbppc/walnut.
2003-09-23 15:21:58 +00:00
fc29eb23bf
Add some PCI definitions listed in evbppc/include/walnut.h.
2003-09-23 15:19:05 +00:00
2977d5a89a
Add IBM40x specific machdep functions.
2003-09-23 15:14:02 +00:00
87f629a7b8
Add IBM405GPr PVR.
2003-09-23 15:10:05 +00:00
94959351e8
Add IBM405GPx specific kernel configuration file.
2003-09-23 15:06:40 +00:00
ee990c494d
Move todclock driver from evbppc/walnut/dev.
2003-09-23 15:01:50 +00:00
ff6df75f63
Add on-chip IIC driver.
...
Add some definitions for IIC driver.
2003-09-23 14:56:08 +00:00
9c7b98f8ce
Add new evbppc port.
...
This port is for OpenBlockS266.
OpenBlockS266: IBM405GPr OpenBIOS.
X1226 is a rtc chip connected with IIC bus.
2003-09-23 14:45:12 +00:00
643e2f262c
Regen
2003-09-23 14:34:38 +00:00
b601ca6ba8
__sigaction14 should have been COMPAT_16 a while ago. GC it now.
2003-09-23 14:34:07 +00:00
24915aa1a2
Regen.
2003-09-23 14:33:34 +00:00
cf3a45c8c1
Make this compile and link properly.
2003-09-23 14:33:24 +00:00
4915f83148
Make isdntel hangup via /dev/isdnteld work by digging out the correct
...
soft context and using it instead of the incorrect one.
Also, don't bother to crash the kernel if we try to hangup a non-connected
dialer, simply return an error.
2003-09-23 14:15:59 +00:00
3337c2e727
move #defines back to frame.h
2003-09-23 11:33:50 +00:00
6b19830ebb
Tweak register usage to shave a couple of instructions off
...
the Xscale code.
2003-09-23 10:01:36 +00:00
f9d629fb93
Fix more probe delay and/or failure problems:
...
1) Don't wait for DRQ on an IDENTIFY command -- if it's not set when we see
BSY clear, abort the command and ignore the drive. (Do this by testing
for DRQ in the read/write cases in __wdccommand_intr().)
2) Don't wait for DRQ to deassert when we finish an IDENTIFY (or any other
non-block command that reads data) -- we don't do this for block I/O, and
empirically it doesn't clear on my CF cards at all, causing a pointless 1s
delay.
3) Add comments to some of the delay()s, and add missing ones in wdcreset()
and the WDCC_RECAL in the so-called "pre-ATA" probe.
4) Slightly simplify the reset sequence -- we were doing an extra I/O.
5) Modify the register writability test to make sure that registers are not
overlapped -- this can happen in some weird cases with a missing device 1.
6) Check the error register value after the reset -- if it's not 01h or 81h,
as appropriate (see ATA spec), punt.
Tested with a number of ATA-only, ATAPI-only, mixed ATA-ATAPI, CF, and IDE
disk configurations.
Also remove the SINGLE_DRIVE nonsense again.
2003-09-23 09:19:22 +00:00
5a696d0850
Fix uninitialised variable introduced with previous change.
...
Patch from mlelstv.
2003-09-23 09:16:07 +00:00
07da406c30
GC a structure element.
2003-09-23 09:11:43 +00:00
67a5559821
cleanup IN_ADIROP/VDIROP handling a little.
2003-09-23 05:26:49 +00:00
e2fbe9d54d
remove unnecessary externs of lfs_do_flush.
2003-09-23 05:26:12 +00:00
f3de6832d9
Additional definitions as per SATA specifications.
...
Approved by Manuel Bouyer.
2003-09-23 03:55:59 +00:00
ec5e739b46
extra blank line
2003-09-23 00:03:05 +00:00
c49d4a7e55
pass signo to fownsignal #ifdef ALTQ
2003-09-22 20:49:39 +00:00
ddfcdc4f1f
Add support for dynamically attaching and detaching RAID array units.
2003-09-22 18:31:10 +00:00
bc88a03488
regen after wsmouse addition
2003-09-22 18:29:05 +00:00
05be5081d9
added wsmouse
2003-09-22 18:23:01 +00:00
448afe509a
add wscons support to amiga mouse
2003-09-22 18:17:30 +00:00
75ae5bc4d8
Count clock interrupts.
...
clock_intr() functions on sun3 are called directly without dispatchers.
XXX should use evcnt(9)?
2003-09-22 17:53:46 +00:00
8012bf2926
Make COMPAT_xx imply all later COMPAT_yy. (COMPAT_09 implies all whereas
...
COMPAT_14 just implies COMPAT_1[56]). This means COMPAT_xy implies NetBSD
compatibility for NetBSD x.y OR LATER.
2003-09-22 17:26:14 +00:00
e1e026b917
KNF a bit.
2003-09-22 17:21:51 +00:00
da943b106a
Remove #ifdef _KERNEL inside #ifdef _KERNEL.
2003-09-22 17:11:46 +00:00
4c224a510b
- replace a magic number with macro
...
- some KNF
2003-09-22 16:54:14 +00:00
95bf6d89d8
SA_SIGINFO support for m68k (compat svr4)
2003-09-22 14:47:35 +00:00
11af0a3c8d
SA_SIGINFO support for m68k (emul linux)
2003-09-22 14:36:42 +00:00
6821f967f5
SA_SIGINFO support for m68k (compat hpux)
2003-09-22 14:35:58 +00:00
bf9728e0db
SA_SIGINFO support for m68k (compat sunos)
2003-09-22 14:34:57 +00:00
9b18b6fa61
regen
2003-09-22 14:32:15 +00:00
cl