matt
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
tsutsui
5dca757b0e
Swap the order of u_int16_t member in Tx/Rx descriptors
...
on big endian machines.
"Big endian mode" of smc83c170 actually works!
(i.e. no htole??()/le??toh() functions are needed.)
2000-05-26 00:20:26 +00:00
tsutsui
dea97be7fd
Don't use bcopy() to copy u_int16_t data to u_int8_t array.
2000-05-26 00:14:41 +00:00
thorpej
c9a7ec7a66
Add Davicom DM9102 registers.
2000-05-25 22:50:11 +00:00
thorpej
7c709cc6b4
Comment the fact that the X3201-3 requires FS|LS in the setup
...
packet descriptor.
2000-05-25 22:18:07 +00:00
thorpej
f4a3f5ea48
So, while the DEC chips and other clones want no FS|LS in the
...
setup descriptor, apparently the Xircom X3201-3 requires it.
2000-05-25 18:46:07 +00:00
mycroft
4bfbc7641d
Recognize the DE-650 with another vendor/product pair and OUI.
2000-05-25 17:21:48 +00:00
thorpej
215a635a5b
Truncate receive buffers to 4-byte boundary. Slightly modified
...
from kern/10198, from Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-05-25 16:47:18 +00:00
thorpej
2f08658512
Fix a couple of typos in debugging messages. From IWAMOTO Toshihiro,
...
kern/10194.
2000-05-25 16:37:33 +00:00
thorpej
05a766d42e
Don't set FS and LS in the setup packet descriptor. From
...
IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>, kern/10194,
and confirmed with the 21040 manual.
2000-05-25 16:36:03 +00:00
fvdl
3e54d43abc
Be sure to not use tagged queueing for a few commands.
2000-05-25 11:41:05 +00:00
bouyer
c9347a04a5
Regen.
2000-05-25 10:16:37 +00:00
bouyer
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
thorpej
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
soren
c25111e4ae
Make two previous changes more correct, as shown by Izumi Tsutsui.
2000-05-24 13:20:32 +00:00
soren
8922795de0
The EEPROM is little-endian.
2000-05-24 08:04:23 +00:00
soren
66083288eb
Fix DMA status reading on big-endian systems. From Sanjay Lal on port-macppc.
2000-05-24 07:49:13 +00:00
soren
35bf53bd9c
And a newline after error string.
2000-05-24 06:04:12 +00:00
itojun
37cc37ead2
correct pcmcom detach (like card removal). PR 9334.
2000-05-24 03:44:46 +00:00
christos
d4bcd03b81
PR/10154: Antti Kantee: ignore 0 length resource(s)
2000-05-23 17:50:53 +00:00
bouyer
2904666f56
Allocate dynamically the command block descriptors.
2000-05-23 17:08:07 +00:00
thorpej
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
bouyer
e662e86225
sd_interpret_sense() can be called from interrupt context; call scsipi_start()
...
with XS_CTL_ASYNC if the failed command was called with XS_CTL_ASYNC.
Add a SDF_RESTART flag to keep state, cleared in sddone().
A mounted disk can now spin down, it will propely spin up at the next access.
2000-05-23 10:20:14 +00:00
bouyer
373582e298
scsipi_get_xs(): if we have XS_CTL_URGENT, return an xfer even if
...
active >= openings. An XS_CTL_URGENT command could otherwise fail, especially
if openings == 1.
2000-05-23 10:16:43 +00:00
enami
28ec465498
Remove $Id.
2000-05-23 08:41:49 +00:00
enami
f87f33d513
Allow userland to retrieve whether the card support WEP while the
...
card power is off. This allows wiconfig to set WEP key etc while power off.
2000-05-23 08:25:51 +00:00
soren
9f00930ace
Make AHC_DEBUG compile.
2000-05-23 03:50:12 +00:00
mycroft
b7c3dc6d20
Recognize more models of the IBM card. From PR 10137.
2000-05-23 02:55:19 +00:00
thorpej
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
thorpej
b8322d5c23
Const poison the layout name.
2000-05-23 00:44:38 +00:00
fvdl
c9fe89891a
Don't try to re-enable tags once they have been disabled because of a
...
MSG_REJECT from the target. Obey the NOTAG quirk.
2000-05-22 21:14:24 +00:00
thorpej
f5d4219e96
Remove an used variable and add a missing `}' so that this compiles.
2000-05-22 16:52:03 +00:00
wiz
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
wiz
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
tsutsui
a6d8e45ba7
Call bus_dmamap_unload() if any Tx mbuf remains in rtk_stop().
2000-05-21 13:00:46 +00:00
matt
20a98cb524
count input and output packets.
2000-05-20 18:33:18 +00:00
thorpej
649ff32f2b
Rather than using a magic constant, use `com_scratch' as the offset
...
in UART space to the interrupt CSR.
2000-05-20 18:25:41 +00:00
augustss
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
ragge
9f7a44710e
Remove (more) VAX dependencies.
2000-05-20 13:41:33 +00:00
castor
9816b43753
regen
2000-05-20 06:30:13 +00:00
castor
773f9bb009
Add Geocast's vendor ID
2000-05-20 06:29:50 +00:00
thorpej
071aed40ac
A foolish consistency; most parts of the kernel use bp->b_data, so
...
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
2000-05-19 18:54:22 +00:00
drochner
415552f3db
add spanish keymap, data from
...
Juan Jose Garcia Ripoll <jjgarcia@ind-cr.uclm.es>
2000-05-19 16:40:04 +00:00
drochner
4a523cfe34
define spanish keymap
2000-05-19 16:39:15 +00:00
jhawk
92f539aa66
Calibrate the timeouts from rev 1.26 by using DELAY(1) so their
...
values are less machine-dependant. Fixes port-i386/10141, where
spurrious timeouts were being seen.
Also note the line numbers of the timeouts so it can be determined
which is being seen (via __LINE__).
2000-05-19 16:00:30 +00:00
tsutsui
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
kleink
5f56eae96a
Add a quirk table entry for the OnStream ADR50 Drive;
...
from S.P.Zeidler <spz@serpens.swb.de> in kern/10118.
2000-05-19 06:55:42 +00:00
thorpej
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
eeh
424619ca1a
Fix the sparc64 console.
...
Unlike the other Sun machines, UltraSPARCs can have consoles run on different
chips than zs, so we need to support them. So, here we go:
Add a new PROM console driver with a major number and everything.
This is the default driver if nothing else attaches. It does not
use the keyboard driver since the PROM translates keystrokes itself.
(Unfortunately it also swallows L1-A).
Have the keyboard driver take over the console when it attaches on a
serial port. When a serial port detects a keyboard and attaches the
keyboard driver, it needs to provide a set of consdev vectors. They
keyboard driver will use those to send I/O to the keyboard and mouse.
2000-05-19 05:26:16 +00:00
minoura
c2e8f67477
Add some missing casts of ioctl arg.
...
Obviously autoconfiguration wouldn't work on big-endian machines.
2000-05-19 04:53:25 +00:00