00cafd0569
Add MIDI support. From Tatoku Ogaito.
2000-07-19 09:58:45 +00:00
0ab524f389
moved the check priviledge for SIOCS80211NWID from each driver to ifioctl().
...
it also fixes the problem that non-priviledged user can change nwid
for wi and ray drivers.
2000-07-19 06:00:39 +00:00
7d1b0e5b39
Use device_lookup() and ditch TAILQ sillyness.
2000-07-18 15:27:44 +00:00
47f692248f
add WEP support also for PRISM2 cards.
...
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
905b4e497f
Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
...
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
4a2a3bf091
Add Farallon SkyLINE 11mb card as Intersil Prism2
...
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
693ff4c94d
PAGE_SIZE -> IOASIC_DMA_BLOCKSIZE in one last place. From Izumi Tsutsui.
2000-07-18 06:14:05 +00:00
b91d520dc9
Back out previous. It is no longer needed, as both the Alpha
...
and DECstation IOASIC drivers clear the appropriate interrupts
in the dispatch routine.
2000-07-18 06:12:33 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
54ccff0437
define "80x24" screen types for better vt100 compatibility
2000-07-15 18:47:54 +00:00
20305c6623
Fix a typo in the `device_lookup()' changes.
2000-07-15 18:12:42 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
498310f5be
Check if card was put into sleep mode using PCI/ACPI power management
...
and try to restart it. This patch based on hints by Jason Thorpe.
2000-07-14 22:00:32 +00:00
b141a6bfe8
Merge-o.
2000-07-14 21:09:45 +00:00
dc4b749234
Fix the status reporting for copybacks. Thanks to Hubert Feyrer for
...
reporting the problem.
2000-07-14 15:26:29 +00:00
d8205b6db1
Do a dummy read after writing through the memory access pipeline, to flush
...
it, before starting the command to install the multicast list.
(We did it right for writing data packets, but failed here.)
Without this, the last multicast address installed won't be made active.
2000-07-14 10:50:50 +00:00
ceafcbd834
apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
...
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900
FIX:
Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
c675def443
Update comment.
2000-07-12 23:14:09 +00:00
1a82fc879b
Regen.
2000-07-12 22:59:54 +00:00
16a4fd2bff
Add DEC DE422 Ethernet.
2000-07-12 22:59:23 +00:00
b2a5b02fc9
Fix a couple of LP64 problems (long -> int32_t).
2000-07-12 21:15:33 +00:00
6c4d97da13
Indicate WEP capability to association request when WEP is enabled.
...
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
2000-07-11 12:54:00 +00:00
4f051180a0
- Use PMAD-BA name for device match logic. It's not a real TURBOchannel
...
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
2000-07-11 04:10:25 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
b99e56173c
do not allow non-priviledged user to change nwid via ifconfig.
2000-07-10 14:36:17 +00:00
0de5b6e260
these don't need <uvm/uvm_extern.h> at all, actually.
2000-07-10 13:54:54 +00:00
c2ed037f55
move associated/synced/no-recent-beacons messages to IFF_DEBUG.
2000-07-10 12:32:53 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
406e0f779f
Add a `device class' interrupt level argument (from machine/intr.h)
...
to bus_interrupt_establish().
It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
d621cc4cb0
Add missing newlines in some messages.
...
Set Vpp the same as Vcc by default. We need to do more with voltage sense.
2000-07-09 01:55:18 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
dcf6e7b09e
When receiving an rx interrupt on a closed or unconfigured port, read
...
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
2000-07-08 18:36:02 +00:00
augustss