Commit Graph

121 Commits

Author SHA1 Message Date
minoura 0ca32eba66 Check existence of the default 10baseT media for 21140.
If one does not exist, fall back to the first.
2002-10-08 15:05:35 +00:00
provos 0f09ed48a5 remove trailing \n in panic(). approved perry. 2002-09-27 15:35:29 +00:00
thorpej 620a647b60 For the 21142/21143 internal Nway, only advertise/resolve media for
which we have SROM blocks.
2002-09-18 19:12:17 +00:00
chs bfb698717d use the SROM info to set the media in 2114[23] autonegotiation
rather than just fiddling the opmode CSR, since we might
need to change the SIA CSRs as well (eg. for some ZNYX cards).
from PR 17510.
2002-07-14 21:02:41 +00:00
chuck 9b667cf839 only powerdown on a suspend. do not powerdown on a standby (PR#17537). 2002-07-09 20:19:57 +00:00
mycroft 8a3f8605fb Add a missing DELAY() in the initial GPIO setup for the 21140. 2002-07-08 18:43:54 +00:00
lukem 06de426449 SIMPLEQ rototill:
- implement SIMPLEQ_REMOVE(head, elm, type, field).  whilst it's O(n),
  this mirrors the functionality of SLIST_REMOVE() (the other
  singly-linked list type) and FreeBSD's STAILQ_REMOVE()
- remove the unnecessary elm arg from SIMPLEQ_REMOVE_HEAD().
  this mirrors the functionality of SLIST_REMOVE_HEAD() (the other
  singly-linked list type) and FreeBSD's STAILQ_REMOVE_HEAD()
- remove notes about SIMPLEQ not supporting arbitrary element removal
- use SIMPLEQ_FOREACH() instead of home-grown for loops
- use SIMPLEQ_EMPTY() appropriately
- use SIMPLEQ_*() instead of accessing sqh_first,sqh_last,sqe_next directly
- reorder manual page; be consistent about how the types are listed
- other minor cleanups
2002-06-01 23:50:52 +00:00
thorpej eb00d53595 Remove duplicate TULIP_SET/TULIP_CLR. 2002-05-31 17:27:40 +00:00
mycroft 3f47c5b658 Clean up some dead code.
Combine nway_reset() into nway_auto().
2002-05-03 08:48:12 +00:00
mycroft a5f6bd3b57 5) Be more liberal in blasting SIATXRX and SIASTAT in nway_auto(); in
particular, make sure that all the SIASTAT_ANS bits are in the right state
   so we don't do something inane.

Still doesn't actually bring the link up properly, but at least it negotiates
most of the time, and does it a little faster.
2002-05-03 06:56:20 +00:00
mycroft b3bd4ab122 More internal Nway issues:
1) Do not call tlp_sia_update_link() in Nway mode, and do not look at SIASTAT
   in any other place that nway_status(), where we first check that it's valid.
   In other places, look at IFM_ACTIVE after having call nway_status().
2) Eliminate stupid MII_MEDIACHG calls, and arrange for nway_service() to
   update status on every call.
3) Nuke the synchronous case of nway_auto() from orbit.
4) Do not call nway_statchg() when using manual configuration; tlp_sia_set()
   does everything we need.
2002-05-03 06:54:37 +00:00
mycroft 1489c15507 Fix multiple problems with 2114x internal Nway:
1) Set OPMODE_TTM in the default tsti_opmode, so that nway_status doesn't
   blow up and report the wrong media type when statically configured.  (This
   code is a hack.)
2) Do not set IFM_ACTIVE (i.e. ignore SIASTAT_LS*) when in auto-negotiation
   mode and negotiation has not completed (per 21143 manual).
3) Do not clear auto-negotiation mode; otherwise the chip will not
   renegotiate on a link failure.

With these changes, 10/100 selection is more stable, and auto-negotiation
comes up with the right status and detects link, but the link does not work
unless it's hardwired.  More work is needed.
2002-05-03 05:41:46 +00:00
mycroft f00c3c2e40 tm_gpctl and tm_gpdata must be shifted right 16 bits. DOH.
This makes another CardBus tlp card work...
2002-04-14 19:10:18 +00:00
chs 110d16d5ae add support for built-in NWay autonegotiation on 2114[23], Macronix
98713A, 98715, 98715A, 98725, and Lite-On 82C115.
2002-04-09 05:57:20 +00:00
mycroft cdb5a13a85 With certain 21140 and 21143 SROM formats, OPMODE_FD was never being set when
the interface was wired to full-duplex mode.  Duh.
Also, add OPMODE_TTM to OPMODE_MEDIA_BITS, to insure that it is changed when
we switch between 10 and 100.
2002-04-05 04:48:40 +00:00
chs 99b5d17961 move some prototypes from tulip.c to tulipvar.h so they can
be used by bus-specific code.
2002-03-26 07:41:40 +00:00
chs 9846849435 in the TULIP_ROM_MB_21142_MII case of tlp_2114x_isv_tmsw_init(),
use "cp" instead of "ncp" as a temporary pointer into the SROM.
we still need the value of ncp here, it points to the next media block.
(update the copy of this code in tlp_21142_reset() just 'cause.)
this makes the BNC port on the Adaptec ANA-6911A work.
2002-03-16 17:38:35 +00:00
chs 1ba402084f assume that 21143 SROM info blocks are in extended format (as the spec
requires), even if the bit to indicate this is not set.
this makes Phobos P430 4-port cards work.
2002-03-14 04:44:34 +00:00
tsutsui 84926576f1 Call malloc(9) with M_ZERO flag instead of memset() after malloc(). 2002-01-12 16:03:11 +00:00
yamt 5bf4d5554b use little-endian crc on multicast hash for admtek chips. 2001-11-22 05:03:04 +00:00
lukem a4bae8b066 add/cleanup RCSID 2001-11-13 13:14:31 +00:00
perry 7a702dcf66 trivially rename some macro parameters to avoid lint warnings. 2001-11-10 22:48:09 +00:00
wiz 456dff6cb8 Spell 'occurred' with two 'r's. 2001-09-16 16:34:23 +00:00
wiz f33f8d5e61 Succeed has two 'c's. 2001-08-20 11:57:34 +00:00
mrg 4f3eac8332 mtod() with uintptr_t, not bus_addr_t. 2001-08-14 11:57:26 +00:00
thorpej 13dab3bfa7 Make sure to initialize the all Rx descriptors properly in *_init()
even if mbufs for them are already allocated.
2001-07-23 17:20:03 +00:00
thorpej 623f83a793 Use BUS_DMA_READ and BUS_DMA_WRITE in some obvious places. 2001-07-19 16:25:23 +00:00
thorpej c2c26e1362 bcmp -> memcmp 2001-07-07 05:35:39 +00:00
thorpej 9988acd41e Don't need INET or NS includes here. 2001-06-12 22:28:15 +00:00
wiz 0a600be867 receive, not recieve 2001-06-12 15:17:10 +00:00
cgd 023e9f0649 C requires that labels be followed by statements. 2001-02-24 00:01:22 +00:00
jdolecek 522f569810 make some more constant arrays 'const' 2001-02-21 21:39:52 +00:00
thorpej 3d0bbf9152 Filter "receive process failed to idle" on noisy chips (like the
ADMtek AN985).
2001-01-17 19:37:09 +00:00
thorpej 2663816278 Fix register offset botch when setting the multicast filter on
the ADMtek AN985.
2001-01-16 17:33:24 +00:00
thorpej 7bebf9a408 On ADMtek chips, don't just idle the chip when programming the
multicast filter.  These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
2001-01-08 22:12:57 +00:00
thorpej e9bb880aaf The ADMtek AN985 "ghosts" the single built-in PHY at every MII address.
Work around this by having a custom media init routine that limits the
search to MII address 1.
2001-01-08 21:40:29 +00:00
thorpej b79ddef845 Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears
to require this.
2001-01-07 23:29:12 +00:00
thorpej ba4b6847df Fix a problem with the ALTQ changes that can cause bogus memory
refernces.  Problem reported by Luke Mewburn.
2000-12-19 00:06:01 +00:00
thorpej 6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
takemura 3c9d9276dc Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
thorpej b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
thorpej 4318834442 Don't trim off the FCS, pass it up. 2000-10-15 19:56:31 +00:00
thorpej 2198741306 Use ether_ioctl(). 2000-10-11 16:57:45 +00:00
onoe fcde56c9ba Add flags to indicate that tlp_init() should set some more BUSMODE bits.
TULIPF_BLE	/* data is big endian */
	TULIPF_DBO	/* descriptor is big endian */
These setting is required for Big-endian bus front-end (such as APbus for
newsmips) to work with tulip.  Also,
	sc_maxburst
member is added to the tulip_softc to limit the maximum burst length.
This member defaults to zero which means no restriction for burst length.
2000-10-11 14:59:52 +00:00
enami db6fba6bdf Move inclusion of rnd.h and sys/rnd.h from tulip.c to tulipvar.h. 2000-10-09 14:31:01 +00:00
enami ca88e2b6bd Make tulip a random source. 2000-10-09 12:54:28 +00:00
bouyer 2e6cb6a878 When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no
need to disable RWT and JAB.
2000-10-05 07:22:43 +00:00
thorpej 5fcde4924f Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber
errors if VLANs are configured on the interface.
2000-10-03 23:35:55 +00:00
thorpej 7edd5d54bc Add support for the ADMtek AN983 and AN985. 2000-10-03 04:32:00 +00:00
thorpej 7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00