quite a few Atheros 802.11n devices. See the athn(4) manpage for a
list.
This port has only been tested with a TP-LINK TL-WN722N USB adapter
which has an AR9271 chipset (VENDOR: 0x0cf3, PRODUCT: 0x9271). The
BSS, Monitor, and HostAP modes all seem to work on that adapter,
though the later has not been tested much.
The driver also supports PCI and CardBUS devices, but those interfaces
are completely untested and probably won't work at this point.
If someone can provide me with other adapters that should be
supported, particularly PCI or CardBUS adapters, or tell me where I
can get one cheaply, I would be happy to try to get the driver working
on those devices as well.
This should make multiple slot controllers, for example those with
a controller on more than one PCI/CardBus BAR, detach with fewer bugs.
Tested with as-of-yet-uncommited sdhc_pci changes on a single-host
ExpressCard JMicron JMB38[89].
This way, if anything fails, it just fails; you don't panic. This can
happen if suspending and resuming of firewire is broken (e.g., as I
encountered in PR kern/44581).
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
-cardbus doesn't use multiple interrupt lines like PCI, and it doesn't
use machanisms like interrupt line register and swizzling -- no need
to carry around dummy information, this is all dealt with by the
bridge
(I'm asking myself how "rbus_ppb" can work -- a bridge attached to
cardbus just can't work like a normal PCI bridge as far as interrupts
are concerned. I thing that should be a hardware specific driver
because behavior is not covered by a standard.)
-cardbus always uses 3.3V -- no need for a variable to keep track
of the voltage
PCI_BAR(1), .... There was no change in the generated assembly. I used
this semantic patch:
@ mapsit @
identifier bar;
expression pact;
@@
(
pci_mapreg_map
|
Cardbus_mapreg_map
)(pact, bar, ...)
@ depends on mapsit @
identifier mapsit.bar;
@@
(
- #define bar 0x10
+ #define bar PCI_BAR(0)
|
- #define bar 0x14
+ #define bar PCI_BAR(1)
|
- #define bar 0x18
+ #define bar PCI_BAR(2)
|
- #define bar 0x1C
+ #define bar PCI_BAR(3)
|
- #define bar 0x20
+ #define bar PCI_BAR(4)
)
conditional compilation.
Simplify interrupt (dis)establishment by two source transformations:
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
The identical change to a few other CardBus NICs has not caused any
problems, as expected, so I'm going to commit this rather safe change
and get on with the work.
Testers have been enlisted. I will revisit this change if I get any
negative responses.
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
The identical change to a few other CardBus NICs has not caused any
problems, as expected, so I'm going to commit this rather safe change
and get on with the work.
Testers have been enlisted. I will revisit this change if I get any
negative responses.
conditional compilation.
Simplify interrupt (dis)establishment by two source transformations:
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
The identical change to a few other CardBus NICs has not caused any
problems, as expected, so I'm going to commit this rather safe change
and get on with the work.
Testers have been enlisted. I will revisit this change if I get any
negative responses.
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
Tested by ITOH Yasufumi. Results: njs(4) works, njata(4) hangs.
njata(4) also hangs in 5.0.1 and in 5.99.24 prior to this patch, so
there is no regression.
