matt
531338f3ce
Adjust vmstat -i / -e for wider event names
2001-08-26 02:50:37 +00:00
matt
5911b9a67f
Make compile with -Wmissing-prototype -Wstrict-prototypes
2001-08-26 02:49:18 +00:00
matt
449a758850
Add EVCNT_TRAP event counter type.
2001-08-26 02:48:12 +00:00
matt
550ffff41b
Make all powerpc ports use a common Makefile.powerpc (except walnut)
...
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.
2001-08-26 02:47:33 +00:00
chs
a65671c2a9
don't mess with vnode holds or buffer lists for swap i/os.
...
fixes problems with leaked vnode holds.
2001-08-26 00:43:53 +00:00
thorpej
bef08d29d9
Also accept (and ignore) -export-dynamic (already accepted --export-dynamic).
2001-08-26 00:02:46 +00:00
chs
d0e2aef09a
add register prefixes. no change in generated .o files.
2001-08-25 23:08:39 +00:00
mjl
78c9e69530
Fix typo mentioned in OpenBSD PR/2032
2001-08-25 23:05:43 +00:00
is
e2ad09e624
synchronize (addition of repulse driver).
2001-08-25 21:19:20 +00:00
is
bd5a12de41
Driver for the ALiENDESiGN Repulse board.
...
- only 8/16 bit precision supported
- no support for the Repulse special S/P-DIF I/O yet
- I think ac97.c needs some work.
2001-08-25 21:15:44 +00:00
chs
753f885263
add register prefixes in asms.
2001-08-25 21:14:44 +00:00
chs
db7d3946ac
add register prefixes. no change in generated .o file.
2001-08-25 21:08:02 +00:00
chs
ed1e153702
use the correct symbol for multi-include protection.
2001-08-25 20:37:46 +00:00
matt
3ec769dff6
Make this compile with -Wmissing-prototypes by adding appropriate
...
cdev_decl, bdev_decl, cons_decl
2001-08-25 19:05:04 +00:00
chs
d38ac3477c
remove -mwarn-no-reg-prefixes, it doesn't work with new gas.
2001-08-25 18:57:37 +00:00
chs
7cffe4c898
switch cesfic to ELF.
2001-08-25 18:39:24 +00:00
chs
6fbd291760
add COMPAT_AOUT_M68K stuff.
2001-08-25 18:37:20 +00:00
thorpej
89893e42b7
ANSI'ify.
2001-08-25 18:04:01 +00:00
bjh21
3f9dc1b3e8
In ioc_attach(), use ioc_irq_setmask() and ioc_fiq_setmask() rather than
...
twiddling registers directly. Also, remove an outdated comment.
2001-08-25 17:59:38 +00:00
bjh21
7da5d70599
Add fiq_on() and fiq_off(), to enable and disable FIQs at the CPU.
...
Call fiq_off() from start() and fiq_on() from cpu_configure(), so we're certain
not to get any FIQs during autoconfiguration.
2001-08-25 17:55:24 +00:00
bjh21
bf5b029d44
Make sure that soft interrupts are initialised in a "not pending" state.
2001-08-25 17:45:32 +00:00
wiz
13237636e2
Remove description of an option that only applies to UNICOS < 7.0.
2001-08-25 16:50:18 +00:00
thorpej
bbdda9d53d
Make the toolchain set lists reflect reality (we do NOT use the new
...
toolchain yet, and someone disabled shlibs in the toolchain w/o fixing
up the set lists...)
2001-08-25 16:46:17 +00:00
thorpej
5bfc586274
Oops, add set names, add <ieeepf.h>
2001-08-25 16:43:57 +00:00
thorpej
a27daf757e
Add MD sets for the algor port.
2001-08-25 16:32:44 +00:00
thorpej
cf301e151e
Add MD sets for the algor port.
2001-08-25 16:21:24 +00:00
thorpej
36c31ac875
Until the new toolchain is ready, /usr/libexec/cpp0 -> /usr/libexec/cpp,
...
so that people can actually build snapshots.
2001-08-25 15:51:36 +00:00
thorpej
f38eb663ed
Building of shared libraries for the toolchain was disabled. Remote
...
them from the set lists for the benefit of those building snapshots
until the toolchain upgrade is finished.
2001-08-25 15:49:12 +00:00
mrg
e63635fdcd
update copyright notices.
2001-08-25 15:06:02 +00:00
mrg
71552c86a0
s/sparc/sparc64/ in a printf()
2001-08-25 15:05:22 +00:00
mrg
05403a4b92
turn off compat & some exec options
2001-08-25 15:04:26 +00:00
mrg
48fcc1a2c3
update a comment about R_UA_32 relocs.
2001-08-25 15:03:19 +00:00
bjh21
ed5e27cc44
Increase the size of a jmp_buf when using ELF, since this will be our last
...
chance to do so for a while. We don't use the extra space yet, but VFP
support is likely to need it.
2001-08-25 14:45:59 +00:00
mrg
69879ba2e5
regenerate.
2001-08-25 12:23:49 +00:00
thorpej
11be81ff63
Regen.
2001-08-25 06:00:01 +00:00
thorpej
6b1f7b723b
Note that the Am79c874 is compatible with the AC101.
2001-08-25 05:59:39 +00:00
thorpej
c783391d0a
Note compatibility with the Am79c874, and document some more
...
registers.
2001-08-25 05:57:12 +00:00
thorpej
9d50e2e95a
Back out previous; closer inspection of the manual reveals that the
...
Am79c874 has the same ID register contents as the AC101.
2001-08-25 05:55:19 +00:00
thorpej
820809faec
Regen; added AMD Am79c874 NetPHY-1LP.
2001-08-25 05:45:25 +00:00
thorpej
05e4fb8e6c
Add AMD Am79c874 NetPHY-1LP.
2001-08-25 05:44:59 +00:00
thorpej
c55c271cdb
Add amhphy(4).
2001-08-25 04:14:26 +00:00
thorpej
4d0a4a139e
Typo in a revious reg.
2001-08-25 04:11:48 +00:00
thorpej
0dc99295fb
Xref amhphy(4).
2001-08-25 04:11:17 +00:00
thorpej
f5d8848984
Manual page for the amhphy driver.
2001-08-25 04:11:05 +00:00
thorpej
85a7cdc261
Driver for the 10BASE-T portion of the AMD 79c901 PHY.
2001-08-25 04:06:26 +00:00
thorpej
222d7da881
Note that the dmphy(4) driver also supports the AMD 79c873 10/100 PHY
...
(it appears as if AMD OEM'd the core from Davicom).
2001-08-25 03:43:57 +00:00
thorpej
b489dbb876
Add a few missing PHYs to the synopsis.
2001-08-25 03:34:07 +00:00
thorpej
6c1c8a75e9
Add pnaphy(4).
2001-08-25 03:31:32 +00:00
thorpej
9c0d5524c0
Xref pnaphy(4).
2001-08-25 03:30:10 +00:00
thorpej
9ee795ae1d
Manual page for the pnaphy HomePNA PHY driver.
2001-08-25 03:29:58 +00:00