525c9d6e37
if doing 'netstat -I <intf> -w <delay>', and netstat can't find an
...
interface of the given name, print an error message and exit.
This whole section of code needs to be re-thought, if interfaces
can be dynamically added or removed.
1996-06-04 20:09:03 +00:00
78937ab274
change > to >= in #endif comment, too.
1996-06-04 20:01:58 +00:00
6110ea9366
#ifdef tty_attach() with PCVT_NETBSD >= 120 (rather than just >),
...
since tty_attach() is now in the 1.2 release.
1996-06-04 19:53:28 +00:00
abc294c9d9
don't tty_attach() the mouse emulator tty.
1996-06-04 19:47:51 +00:00
2d03e599c7
don't depend on being able to read the IMR. Apparently, it doesn't
...
work (as documented in the DEC 3000/[3-9]00 System Programmer's Manual)
in some of the older 3000/500 systems.
1996-06-04 19:02:16 +00:00
84fc678011
Use setne instead of setnel, new versions of gas balk at the bad mnemonic.
...
Wrong mask was used in s_finitef.S.
1996-06-04 18:00:34 +00:00
565cd65355
Sync "iteconfig -h" output with reality and man page.
...
From Hubert Feyrer, #2444
1996-06-04 16:27:56 +00:00
b9c4c21d8e
add a comment on how to use tty_attach().
1996-06-04 13:59:10 +00:00
6959d64eeb
Some more constants from Bob Nestor--MacTV ADB works, now.
1996-06-04 03:04:49 +00:00
3dfb6ab8c0
Code the residual computation a bit differently.
1996-06-03 23:48:41 +00:00
b58401e04e
Not needed. This was identical to the VOYAGER config.
1996-06-03 22:50:07 +00:00
8477987501
Fixed lots and lots and lots of -Wall compiler warnings.
1996-06-03 22:44:53 +00:00
f2a8347cc4
Fixed -Wall compiler warnings.
...
Implemented a setsoftintr() function.
1996-06-03 22:44:36 +00:00
bfe01da7b5
Tidied up the prototype declarations.
1996-06-03 22:41:14 +00:00
4732cc6c39
Make sure that the ethernet address has been set correctly before
...
attaching the interface to the network code.
1996-06-03 22:39:12 +00:00
45842a3af6
Merged in the latest changes that have been mode to the isa lpt driver.
...
Merged in the latest plip code from the pc532 port.
1996-06-03 22:36:23 +00:00
0217e55278
Fixed the softnet interrupt code to properly use netisr.
1996-06-03 22:33:51 +00:00
e2391b47fd
Merged in the latest changes that have been made to the isa com driver.
1996-06-03 22:30:36 +00:00
f941f8cdb9
Fixed -Wall compiler warnings.
1996-06-03 22:20:32 +00:00
1c9f0501fc
Don't complain about a drive type of zero, just treat it as no drive
...
present.
1996-06-03 22:19:21 +00:00
59e4127d96
Use the sync information in the mode definition to set the VIDC sync
...
polarity.
1996-06-03 22:14:56 +00:00
2f6e37b679
Fixed -Wall compiler warnings.
1996-06-03 22:11:34 +00:00
433594b99d
missing semicolon
1996-06-03 22:11:23 +00:00
d4b96c659d
Fixed -Wall compiler warnings introduced when fixing the vt220 printing
...
bug.
1996-06-03 22:08:37 +00:00
a2a08dd859
Removed the old QUADMOUSE_* ioctl names. Everything now uses the
...
generic mouse ones.
1996-06-03 22:07:39 +00:00
aa4be90f73
General code format tidy up.
...
Added missing function prototypes.
1996-06-03 22:04:40 +00:00
0ba929925d
Added proper definitions of quadrature mouse button register.
1996-06-03 22:03:36 +00:00
258f83367c
Added setsoftintr() prototype.
1996-06-03 22:00:50 +00:00
0b265889c6
RCS Id police.
1996-06-03 21:58:25 +00:00
515759c222
Added PLIP soft interrupt.
1996-06-03 21:57:52 +00:00
10d9fbd5fe
RCS Id police.
1996-06-03 21:55:46 +00:00
89711a59f0
Fixed -Wall compiler warnings.
1996-06-03 21:53:33 +00:00
17582aa655
Removed some dead code from cpu_exit().
...
Fixed -Wall compiler warnings.
1996-06-03 21:46:15 +00:00
7d3a5033a5
Use special versions of the IRQdisable and IRQenable macros that
...
keep FIQ's active.
1996-06-03 21:43:06 +00:00
2d9f11e999
Add visibale debugging info for the RC7500 board.
1996-06-03 21:41:09 +00:00
2a56b05b3d
Implemented cache and tlb flush functions for the StrongARM.
...
RCS Id police.
1996-06-03 21:38:05 +00:00
8251f6e1f7
Fixed copyright message.
1996-06-03 21:36:14 +00:00
6da55f03ee
RCS Id police.
1996-06-03 21:35:10 +00:00
6ecba1cbe0
Added extra diagnostic information that can be printed when the ARM700
...
prefetch abort bug occurs.
Fixed -Wall compiler warnings.
1996-06-03 21:32:11 +00:00
ff542922fa
getdevice() now defaults to returning the a partition if no partition
...
is specified in the string.
Fixed -Wall compiler warnings.
1996-06-03 21:28:59 +00:00
bd72d43fdc
Major code clean up. Now satisfies the source code style guide.
1996-06-03 21:27:21 +00:00
5a66df3d3d
RCS Id police.
1996-06-03 21:21:29 +00:00
3e82f2c697
Fix typo that can cause ypbind to assume an error when one doesn't
...
actually exist if the server takes a dive.
1996-06-03 20:44:51 +00:00
5bd844ce5d
Fix buglet in ypbindproc_domain_2() which caused:
...
ypbind; sleep 10; ypwhich
to fail (where failure is defined as ypwhich hangs until it gives up,
complaining about not being able to communicate with ypbind). Failure
mode pointed out by Chris G. Demetriou <cgd@cs.cmu.edu>.
1996-06-03 20:32:55 +00:00
b1b4f705ba
convert alpha vtophys() #defines to use __alpha_bus_XXX_dmamap(), to
...
get rid of the nasty (vtophys(va) | 0x40000000) expressions, and to make
the code more correct.
1996-06-03 20:30:21 +00:00
c6dd609e7f
gross hack to get around the fact that there are currently devices with
...
common back-ends that live on multiple very-different busses (e.g. PCI and
TC), which need bus-specific DMA mapping support. As a nice side effect,
this will allow the especially nasty (vtophys(va) | 0x40000000) expressions
to go away in favor of less nasty bus-specific function calls.
1996-06-03 20:18:48 +00:00
e038a84b34
add "le* at pci?", because it compiles and may actually work.
1996-06-03 20:10:52 +00:00
729d7a8aa8
only do tty_attach() for first tty of each chip; that's the only real tty.
1996-06-03 19:43:31 +00:00
60da050b90
fix session pointer field width: make it two characters wider.
...
(The alpha will use all 8 chars.)
NOTE: use of (addr & ~KERNBASE) is VERY bogus.
1996-06-03 19:00:23 +00:00
7aaddee417
#define GRFIOCBLANK_LIVE and GRFIOCBLANK_DARK in grfioctl.h to make absolutely
...
clear which switches the video signal on and which off.
Make all grf_??.c (which supported it) use the same polarity of the test.
While being here, use a > test instead of implicit != to make it extensible
to darker than dark values for power managment systems.
1996-06-03 18:55:08 +00:00
cgd