but add a second argument to it to indicate whether the TLB/caches need to be
flushed. Default cortex to pmap_needs_fixup = 1. But check the MMFR3 field
to see if the fixed can be skipped.
Use a cf_flag bit 0 to indicate whether the A9 L2 cache should disable (bit 0 = 1)
or enabeld (bit = 0).
With these changes, the A9 MMU can use traverse caches to do MMU tablewalks
Also, make sure all memory has the shareable bit for the A9.
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL
Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.
Now wsconscfg(8) should be able to switch VTs when expected.
Implemented after no objection from tech-kern to the following:
On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?
<arm32/machdep.h>
Move the extern for cpu_reset_address to the same file.
Add cpu_reset_address_paddr.
Kill cpu_reset_v4_MMU_disable.
if cpu_reset_address is NULL, then the MMU will be disabled.
unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.
No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().
Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().
Make cpu_rootconf(9) describe the calling order.
- pull touchpanel adjustment ioctls to w100lcd.c for SL-C7x0/860
from zlcd.c for SL-C1000/3x00
- add sample xorg.conf for C7x0/860 (which have hardware screen rotation)
- rename old xorg.conf.sample for C1000/C3x00 to xorg.conf.C3x00
- adjust md set list
Ok releng@ nonaka@
All porting work was done by TOYOKURA Atsushi, with
several minor adjustments for integration by me and nonaka@.
His SL-C700 first running NetBSD/zaurus was demonstrated on
NetBSD booth at Open Source Canference 2011 Tokyo/Fall:
http://www.NetBSD.org/gallery/events.html#opensourceconf2011-tokyofall
Note GENERIC kernel works on SL-C750/760/860 (and C1000/3x00) but for now
SL-C700 requires its own kernel with special KERNEL_BASE_PHYS address
due to zbsdmod.o loader restriction (probably caused its small 32MB RAM).
schedule initial values in that case as ioexp does. Suggested by nonaka@.
Now lcdctl no longer has to defer lcdctl_set_brightness() by
config_finalize_register(9), which is a bit too late.
(i.e. no backlight during USB/SD probe by config_interrupt(9) in previous)
- ztp depends on zssp so attach ztp at zssp rather than pxaip
- split LCD backlight controls from zlcd(4) into new lcdctl device
to share it among forthcoming SL-C7x0 variants
http://mail-index.NetBSD.org/tech-kern/2011/12/15/msg012226.htmlhttp://mail-index.NetBSD.org/tech-kern/2011/12/17/msg012229.html
- add 'ls' op to struct fs_ops to support ls command on each fs,
enabled by -DLIBSA_ENABLE_LS_OP and SAMISCMAKEFLAGS+="SA_ENABLE_LS_OP=yes"
in libsa
- split sys/lib/libsa/ufs_ls.c into UFS specific part and MI part (ls.c)
that opens the target fs and calls fs-depedent XXX_ls() functions
- add a ls op for ext2fs
(all other fs than ufs and ext2fs don't have actual ls ops yet)
- replace existing MD ufs_ls() calls with this new MI ls()
The original patch was written for i386 and ext2fs.
zaurus zboot has been tested by nonaka@.
ews4800mips and x68k loaders have been tested by me (with several fixes).
landisk might be okay since it was almost copied from i386.
XXX1: "ls" op in fs_ops looks a bit inconsistent, but we will be able to
replace it with real fs ops like readdir if it's really worth
XXX2: someone might have to check sys/arch/ia64/stand/efi/libefi/efifs_ls.c
the original ad-audiomp branch notes:
Add MP locking to the audio drivers.
Making the audio drivers MP safe is necessary before efforts
can be made to make the VM system MP safe.
The are two locks per device instance, an ISR lock and
a character device lock. The ISR lock replaces calls to
splaudio()/splx(), and will be held across calls to device
methods which were called at splaudio() before (e.g.
trigger_output). The character device lock is held across
calls to nearly all of the methods, excluding some only
used for initialization, e.g. get_locks.
Welcome to 5.99.57.
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.
This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.
