pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.
For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:
Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.
siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.
slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.
viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.
While I'm here, make pci_mapreg_submap() static.
With these changes in place, I have tested the compilation of these
kernels:
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC
As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:
### evbmips-el GDIUM
nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop
### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'
### ia64 GENERIC
/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type
### sgimips GENERIC32_IP3x
crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.
See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.
copyright. Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.
Extra verification by snj@.
disabled by -D) from the output of newvers_stand.sh. Change -D to the
inverted logic, so that it adds the date to bootprog_rev in ().
Change all platforms accordingly. -D is added if MKREPRO is not yes and
wasn't present before. Platforms that didn't use -D don't depend on
MKREPRO now either.
trees, because it can race with the libsa/libkern/etc. makefiles' own
cleandir rules. I think I've found all of the uses of the offending idiom...
Closes PR 43360.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)
i built about 20 of these kernels to check, but not all of them.
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.
This allows use of subr_disk_mbr on all archs. Default to it for
the rump disk component. No functional change for regular kernels.
(The other option would've been to include dkbad in disklabels
everywhere, but arguably this approach has less possible side-effects,
especially given that wedges and related magic will take over the
world any second now).
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)
See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html
Reviewed by abs@ in private mail.
to avoid unnecessary 64 bit ops which would make binaries larger:
satime_t (currently unsigned int):
numbers in seconds returned by the machine dependent getsecs() function
which are used to measure relative time
saseconds_t (currently int):
numbers in seconds used to specify timeout to network drivers
Per discussion on current-users.
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:
1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.
2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.
I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.
