8bfa8833dc
Add release-building glue for NetBSD/evbarm. Currently we build
...
two kernel sets: one for INTEGRATOR, one for IQ80310.
2001-11-29 22:46:42 +00:00
44f4566e1a
Change the way kernel sets are specified, and make them
...
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00
69c7349d44
fix mfs examples
2001-11-26 16:34:56 +00:00
ff0f6d3aec
Fix oversight in the addition of install-etc-files target; move the
...
.endif for DISTRIBUTION_DONE to the right place.
2001-11-25 18:19:14 +00:00
33c33d421a
Synthetically generate metadata entries for passwd, spwd.db, pwd.db.
...
XXX Note that it can easily be argued that these should be generated by
the installer, not shipped in the tar files, but that's for another day.
2001-11-24 21:41:12 +00:00
8d76c9bee4
Watching inode usage is important, too.
2001-11-23 04:20:27 +00:00
7e84b9e1db
Add wscons devices.
2001-11-22 04:50:04 +00:00
53805e1cd5
uucpd supports IPv6
2001-11-21 10:27:53 +00:00
e5c4213a9f
etc Makefile.inc for sgimips.
2001-11-20 16:41:44 +00:00
ba119b4fb0
Split the "distribution" target into "distribution" and "install-etc-files",
...
the latter being called by the "distribution" target. This allows the
various /etc/... files to be installed manually in a convenient way, if
desired.
NOTE: It is INTENTIONAL that this target is not named "install".
2001-11-20 16:07:59 +00:00
2d02e3afad
UNPRIVILEGED->UNPRIVED
2001-11-19 05:05:06 +00:00
6a4937a4c8
use reverse_list() (from rc.subr) to reverse the list
2001-11-19 03:19:28 +00:00
50b7dbcb07
Add reverse_list(), which prints the reverse of the list of words.
...
Doesn't attempt to handle words with whitespace, etc.
2001-11-19 03:18:32 +00:00
6424a6316a
Make more USB controller devices. You can easily have 6 these days.
2001-11-15 22:16:17 +00:00
0b5c0ba712
Make the TARGET_ENDIANNESS check only valid when making release, snapshot,
...
or distribution.
Also, clean up the check and include <sys/endian.h> instead -- some platforms'
<machine/endian_machdep.h> pull in the definitions of _BIG_ENDIAN and
_LITTLE_ENDIAN, invalidating the test; this makes the check values uniformly
"4321" and "1234" respectively.
2001-11-13 17:14:27 +00:00
f6d503d78f
Fix vnd blk/chr number.
2001-11-11 00:39:33 +00:00
6714016a2d
add /usr/share/man/{cat,man}8/evbarm
2001-11-10 22:56:18 +00:00
33e8c8e58d
Add evbarm "etc" files.
2001-11-10 18:55:52 +00:00
bc4df2b935
Remove speed specification from the "default" entry. This allows
...
/etc/ttys to specify "default" and inherit whatever speed the device
is currently using (very useful for some serial console configurations).
2001-11-10 18:49:13 +00:00
949fa9ae03
remove blank lines from the lists of files to backup_and_diff
2001-11-09 09:01:20 +00:00
66105909dc
placeholders for wscons
2001-11-08 06:29:24 +00:00
25ebf09ae0
add various directories under /usr/include (kernel includes) and
...
/usr/share/nls that have previously been created by <bsd.kinc.mk>
and <bsd.nls.mk>
2001-11-06 10:56:46 +00:00
7526979e21
Don't run rules unless DESTDIR is set *and* contains a value. Fixes PR 14410
2001-10-31 02:58:58 +00:00
0f4c5ed617
Add moused, default off.
2001-10-29 23:25:00 +00:00
8abd9b8182
Create wsmuxN and wsmuxctlN together.
...
Use separate nodes for wsmouse and wskbd.
2001-10-29 22:50:40 +00:00
6476719bea
Add rm's before symlink and hard link commands.
...
Shouldn't be needed, but install has no other good way to deal with
this.
Pointed out by Rob Windsor in PR 14394 -- I committed his patch plus
one for something he didn't hit yet.
2001-10-29 22:18:28 +00:00
6ca8767be9
Now that it will actually work, replace instances of ln with install.
2001-10-29 01:19:19 +00:00
6d536163de
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
...
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
2001-10-26 06:45:33 +00:00
3f973487e6
Since <bsd.prog.mk> is included, we already have a full list of default
...
build rules for all standard targets. Remove the manually-created list
of empty rules.
2001-10-24 02:43:13 +00:00
b159dba912
Fix a mysterious
...
csh: Permission denied
csh: Trying to start from "/var/log"
message.
This was caused by the
su -m uucp -c "uustat -a"
line being executed in a directory not readable by uucp. The login
shell implied by -m is of course root's shell, /bin/csh, which doesn't
like not being able to read the dir it is in, and thus the errors. By
temporarily cd'ing to /tmp the problem is fixed.
What is really needed, of course, is a way to tell su what shell you
want to use explicitly, especially for use in scripts where the
vagaries of which shell the login executing the script uses should not
be depended on. No such method exists. One should be added.
Indeed, it might also be nice to have a way of telling su to directly
execute a command with -c rather than using a shell to interpret the
command.
I cannot find any standards documents that specify su at the moment,
though. SuSv2 is silent on su(8).
2001-10-23 18:39:03 +00:00
0d724a7b06
stylistic nit: dump -W, not dump W
2001-10-23 17:34:53 +00:00
e6a08ecc0f
Fix typo on pci* add's. Missing bash
2001-10-20 05:57:32 +00:00
80439f53c0
Do not run MAKEDEV on "make distribution". The device nodes are not part
...
of the resultant tarballs; only the MAKEDEV script itself is. Running
MAKEDEV here can futz with cross build hosts.
2001-10-19 15:07:48 +00:00
11336572c3
add -dgq to check_pkgs ls(1). suggested by @@@
2001-10-18 16:08:24 +00:00
4f34915dce
Add -T option to ls(1) when -l option is specified.
...
This fixes none-changed files under ${backup_dir}/pkgs as bellow:
======
/var/backups/pkgs diffs (OLD < > NEW)
======
159c159
< -rw-r--r-- 1 root wheel 528 Apr 19 01:11 ja-less-332/+CONTENTS
---
> -rw-r--r-- 1 root wheel 528 Apr 19 2001 ja-less-332/+CONTENTS
2001-10-18 14:50:17 +00:00
0cbd019fc3
playstation2 support
2001-10-15 16:22:50 +00:00
98228effd2
Use "nodiff" instead of "nomail" for the tag which is used to exclude
...
files from having the changes diff generated. Suggested by Michael Graff.
2001-10-15 03:00:22 +00:00
9d713861f1
monitor etc/changelist again
2001-10-15 02:56:42 +00:00
74cf1ec6f4
minor optimisation suggested by christos
2001-10-14 00:42:31 +00:00
9cf0f0364b
Allow creation of wsmuxctl devices.
2001-10-13 20:20:54 +00:00
6c2d977e6f
A few more changes, from more discussions with Andrew Brown.
...
- Resurrect /etc/changelist, even if it's an "empty" file by default,
because it's easier to use than /etc/mtree/special.local for adding
a couple of simple files. Back by popular demand (hi @@@! :-)
- Add /etc/rc.d/* to the list of "dynamic" files; this notices changes
in user-added scripts
- Only calculate the mtree -I nomail list once, and re-use
- Use "cat foo | while read file" instead of "for file in `cat foo`" ;
handles whitespace better...
2001-10-13 14:22:11 +00:00
96a1608ee4
Major overhaul, with help from Andrew Brown <atatat@netbsd.org>.
...
Features:
- Add a bunch of stuff to /etc/mtree/special to enable removal of
/etc/changelist:
- files which we want to monitor for changes but don't want to
see the diffs of (master.passwd, ssh_host_key, ...) are
tagged with "nomail"
- files which we don't want to monitor are tagged with "exclude"
(such as netgroup.db, kvm.db, ...)
- monitor /etc/mtree/special.local, /root/.ssh/*
- remove /etc/changelist, and a bunch of XXX comments
- use mtree(8)'s -D, -I, and -E to generate lists of files to
actually do the changelist stuff on.
- support /etc/mtree/special.local as an optional user-provided
version of /etc/mtree/special (effectively, an enhanced
/etc/changelist)
- Add code to monitor: /etc/ifconfig.* /etc/raid*.conf /etc/rc.conf.d/*
including support for these files being added and removed at will.
- If /sbin/fdisk exists, backup the output of "fdisk $disk" for all
the active disk drives as part of $check_disklabels
- Check permissions on: ~/.ssh/* ~/.shosts
Details:
- Reorder initialisation of defaults
- Remove special case for /etc/master.passwd "monitor but don't email diffs"
with general case for other similar files.
- Keep all `autogenerated' files (such as disklabel.*, setuid.current, ...)
in "$backup_dir/work", to minimise name clashes.
- Add migrate_file(old, new) to do the hard work of migrating files
from the old `top level' /var/backups mechanism to the `full path'
mechanism recently added. Use this appropriately.
- Add backup_and_diff(file, printdiffs), to the hard work of backing-up
and diff-ing files.
- Cleanup use of shell redirects
- /bin/sh supports ~root globbing, so use it.
- Improve umask checking; use awk regex rather than awk math
2001-10-12 05:18:23 +00:00
01c63bc35a
- add "ntpd" user (homedir: /var/chroot/ntpd) and "ntpd" group, for use by
...
future work to support a chroot(8)ed ntpd
- move /var/named -> /var/chroot/named for consistency with ntpd
2001-10-11 07:21:07 +00:00
f28a27bd16
if named_chrootdir is set, always repoint the /var/run/named.pid and
...
/var/run/ndc symlinks, because named_chrootdir might change between
restarts and the symlinks weren't getting updated correctly in the old code.
2001-10-11 07:10:08 +00:00
d15ad88d82
skip "distribution" step if DISTRIBUTION_DONE is set.
2001-10-10 06:58:56 +00:00
0674841150
Put the 'uustat -a' into double quotes.
...
It still doesn't work, but you won't get the error about an Unknown option: `-a'
anymore.
The login shell for uucp is /usr/libexec/uucp/uucico, so su -m doesn't work.
This needs to be fixed.
2001-10-09 05:28:42 +00:00
a28fcd776c
Make mtree a host tool and use it when appropriate.
2001-10-09 05:19:03 +00:00
a9b011ff87
remove unnecessary uname=root
2001-10-08 02:48:49 +00:00
ff2aa3f8e8
Take advantage of mtree(8)'s recently added support for absolute paths.
...
Use a default "/set uname=root gname=wheel".
This drastically reduces the size of the file, as well as making it
far more maintainable. The differences are:
lines words bytes filename
342 1633 16272 special-relative
295 998 11971 special-absolute
2001-10-05 16:11:46 +00:00
877f022d22
Take advantage of mtree(8)'s recently added support for absolute paths.
...
This drastically reduces the size of the file, as well as making it
far more maintainable. The differences are:
lines words bytes filename
3240 3847 43634 NetBSD.dist-relative
632 696 17166 NetBSD.dist-absolute
2001-10-05 16:09:38 +00:00
a938c1418c
minor whitespace fix
2001-10-05 01:06:17 +00:00
c4d13adb05
Append / to ${DESTDIR} in distrib-dirs rule; fixes PR bin/14080.
2001-10-04 16:46:22 +00:00
8c4fc91c36
replace "pkg_dbdir" with "pkgdb_dir", to be consistent with "backup_dir"
2001-10-03 15:41:25 +00:00
350cdd6a80
Since we store the output of ls for use later, make sure that we have TZ=UTC.
...
(Otherwise time zone changes cause us to believe that files have changed
when they have not.)
2001-10-03 07:04:32 +00:00
f263bbb1eb
- clean up a couple of comments
...
- reformat some awk blocks
- replace "sed 1d | awk '...'" with "awk 'NR==1 {next;} ...'"
2001-10-03 00:12:17 +00:00
451df90b87
add /etc/defaults/*.conf
2001-10-02 03:02:10 +00:00
937f059e75
remove rule for pkgsrc - we don't have one for any of the other source
...
directories. requested in [bin/13818]
2001-10-02 01:21:27 +00:00
3e5fe9c71e
add etc/rc.d/*. fixes [bin/12729]
2001-10-02 01:08:11 +00:00
10887c7f1f
rc.local is technically an optional file...
2001-10-02 00:26:07 +00:00
d15062c3c7
add ssh{,d}.conf, ssh_known_hosts{,2}, ssh_host_{[rd]sa_,}key{.pub,}
2001-10-02 00:16:36 +00:00
6d044e5a56
add a bunch of optional etc stuff from changelist:
...
Distfile bootparams bootptab ccd.conf daily.local defaultdomain
dhclient-enter-hooks dhclient-exit-hooks dhclient.conf dhcpd.conf
disktab ethers ftpd.conf ftpwelcome gateways hesiod.conf hosts.allow
hosts.deny hosts.lpd ifaliases ipf.conf ipnat.conf ipsec.conf
monthly.local mygate myname netgroup netgroup.db netstart.local
ntp.conf passwd.conf rbootd.conf rtadvd.conf security.local
ttyaction usermgmt.conf weekly.local
- add required stuff from changelist:
etc/floppytab etc/netconfig etc/sysctl.conf
var/cron/tabs/root
var/yp/Makefile
sort mail/ into its proper place
add some comments to remind us of things to look at in the future
2001-10-01 08:01:36 +00:00
9202500182
Add a chunk of code to check the installed pkgs list by making a list
...
of all installed pkgs and their +CONTENTS and +REQUIRED_BY files (if
they have one) and handling this file along with all the other
CHANGELIST stuff.
Greg Woods gets points for coming up with the idea.
Luke Mewburn asked me to do it, and provided lots of criticism along
the way.
2001-10-01 02:21:20 +00:00
d8250777f4
Make rtsol_flags default to -a, to do Router Solicitation on all
...
interfaces when someone sets rtsol=YES.
OK'd by Itojun.
2001-09-24 11:34:11 +00:00
5a212acf6e
remove acd (non existant), add ld (for hw raid logical drives)
2001-09-24 03:19:43 +00:00
5f93a646a5
add raid, remove cd drives and floppy drives from the nightly disk
...
permissions checks.
note: This whole thing needs to be rototilled. And yes, I'm
volunteering to do it.
2001-09-23 19:51:20 +00:00
247041e342
Update the password sanity checking thusly:
...
1) If a password entry is of the form \*[A-z-]+, do not complain that
the account is off but has a valid password. Thus you can do
passwords like *ssh to indicate ssh only logins.
We should come up with a standard scheme for what various *keywords mean.
Note that if the field length is 13, 20 or 34 you'll still get
bitched at.
This code should be cleaned up. (So should the password scheme.)
2) If the entry is for "toor", don't complain that the account is off
but has a valid shell. We ship with toor:*:, there is no point in
complaining about it.
Part of the campaign against spurious security warning output.
2001-09-23 19:10:25 +00:00
215d097e45
run mtree on the special file using the new -l option, so it will not
...
complain about things like files set 444 instead of 644.
part of the campaign against spurious output in the nightly security run.
2001-09-22 04:06:23 +00:00
fcf00dcc00
Add `dpti', which is an I2O vendor extension implementing the DPT/Adaptec
...
control interface. This makes it possible to run the Linux versions of
dptmgr, raidutil, dptelog and other tools under NetBSD.
2001-09-21 23:44:19 +00:00
80e5affebe
language corrections
2001-09-19 23:42:21 +00:00
1bdee7b3c6
Create stic devices.
2001-09-18 19:58:41 +00:00
90d9e7e552
Add a new IANA registered service: italk. (a multilingual chat system)
2001-09-18 03:50:43 +00:00
a6d42bbc31
Run uustat with uid=uucp, not with euid=uucp/uid=root, to prevent
...
some badboys gaining back root privs. Inspided by OpenBSD.
Not that we didn't have this forever... (SA, anyone?)
2001-09-17 23:41:32 +00:00
06eedf1e47
Create wsfont in the wscons target, so it would be created during a
...
MAKEDEV all.
2001-09-16 08:19:06 +00:00
c7abdf2c7c
Added the clockctl device for macppc
2001-09-16 07:31:07 +00:00
3ca38a76ec
add comments for previous; fixes MAKEDEV.8 generation. noted by wiz.
2001-09-15 18:31:50 +00:00
57dca874e2
create ss, ch, uk and pci devices.
2001-09-15 17:44:47 +00:00
5fdfced15e
Make pci and agp device nodes.
2001-09-15 04:45:28 +00:00
e27d25403e
Fix a typo.
2001-09-15 04:42:45 +00:00
5cd421c8c0
Create dtyC* devices, as well.
2001-09-15 04:41:46 +00:00
a089a25a28
Add PCI bus devices.
2001-09-14 21:15:03 +00:00
6813f628ef
Make pci device nodes.
2001-09-13 22:09:15 +00:00
41f3e70221
build GENERIC_PS2TINY and make kern-ps2tiny kern set
2001-09-13 18:08:13 +00:00
504f009161
Add an entry to make wsmux devices.
2001-09-10 21:23:53 +00:00
a00e8936cb
Add agp device(s)
2001-09-10 12:58:35 +00:00
ef3e53a669
Add downinterfaces. Noticed by Thomas Klausner.
2001-09-08 06:06:52 +00:00
552b2e3600
Make this work without parameters (i.e. manual invocation)
2001-09-04 20:40:40 +00:00
d7e4ab316c
Add support to down some interfaces before shutting down the system. All
...
pppoe* interfaces are automatically shut down by this script, others may be
added to the force_down_interfaces variable in /etc/rc.conf.
2001-09-04 18:09:13 +00:00
c2335854a1
add comments for automatic manpage creation
...
(pointed out by Thomas Klausner)
2001-09-03 18:37:15 +00:00
19e9e70941
add vmegen and wsfont devices
2001-09-03 18:18:25 +00:00
cc353c4912
Sync hpcarm & arm32 conf.c (this entails shifting the i4b major numbers
...
up by one on arm32 and and adding notdef entries on hpcarm).
2001-09-03 01:33:38 +00:00
09c135bad9
Add some dirs needed for texinfo locale files.
2001-09-02 22:55:08 +00:00
e60403a3f9
Remove rz/tz support for pmax, switch to MI SCSI.
2001-08-26 11:55:38 +00:00
97ff24357e
Clean this up so it works again.
2001-08-26 05:31:28 +00:00
a826a2ecf0
clean up a bit; also fix a snap_pre_md segment to be in snap_md_pre so it is actually executed.
2001-08-23 16:01:56 +00:00
5b9869d189
don't clobber INSTALLATION_DIRS, just add to it. add support for building
...
32 bit libraries, crt and ld.elf_so on 64 bit platforms (disabled by default).
2001-08-23 14:40:21 +00:00
31be837848
support kernel configs called `../../sparc64/conf/GENERIC32', and the like,
...
by stripping the dirname off by using ${configfile:C/.*\///} where necessary.
2001-08-23 14:37:02 +00:00
8624e48221
Add /usr/share/man/{cat,man}8/netwinder.
2001-08-23 01:35:36 +00:00
44c7bc97b4
Add some etc.netwinder support for netwinder. XXX Far from complete
...
but makes snapshots possible.
2001-08-22 18:34:48 +00:00
4f36ab62b6
chown user.group -> chown user:group
...
according to cvs log of basesrc/etc/etc.sun3/ttyaction and
archive of source-changes, it was backed out with MAKEDEV
because of portability issue.
but i think ttyaction doesn't have that issue as it's never
executed on non-NetBSD environment.
2001-08-21 15:16:59 +00:00
bf0195348a
the installation directory is called miniroot not xminiroot.
2001-08-19 14:18:39 +00:00
e74599e179
Make newsyslog at boot optional, as it should have been.
2001-08-18 19:50:19 +00:00
8d6595d978
Add /usr/share/man/{man,cat}4/sun2
2001-08-17 07:15:12 +00:00
e2773e5d61
run fsck with "-n -f" instead of just "-n"; recent changes to fsck
...
mean that file systems mounted read-write are skipped unless -f is given.
problem noted by andrew brown.
2001-08-09 15:30:30 +00:00
ed97fbd98d
create /var/named 0755 root:wheel instead of 0750 root:named
2001-08-09 01:32:46 +00:00
799202c512
Fix botched commit (a conflict was committed).
2001-08-05 03:37:37 +00:00
e6b1a09d07
Use "mtree -U" instead of "mtree -u" on making distrib-dirs
...
to ignore file hierarchy unmatches and check exit status of mtree
to detect actual errors on it (like "unknown user/group" etc).
2001-08-04 18:41:18 +00:00
d472541074
And add sshdconf here too. Christ there are alot of files to update.
2001-08-02 05:47:59 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
d2b1c33dc5
Undo last: glob(3) isn't used for _whatdb (yet?).
...
[broke e.g. installation of devel/netcdf]
2001-07-29 15:50:29 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
5241fef795
add INSTALL_PS2 to BUILD_KERNELS
2001-07-21 13:38:22 +00:00
9d85345191
Build an INSTALL kernel too.
2001-07-21 05:58:28 +00:00
b8927f0fc1
Renumbered the minors on the tty devices now that
...
the keyboard and mouse are on ttys now.
2001-07-13 03:24:49 +00:00
458d1a2516
After itojun's recent RTF_CLONED and other changes, it's not necessary to
...
add a route from an alias address to 127.0.0.1, so remove that code.
It's still necessary to configure lo0 -> 127.0.0.1 though, so emphasize that.
2001-07-08 07:16:00 +00:00
c7ba90b340
Don't list uk twice.
2001-07-06 07:45:47 +00:00
3543e0f5fa
Start "ipmon" with option "D" for daemon mode instead of starting it
...
in a subshell.
2001-07-05 05:26:57 +00:00
b53f2df0b2
add AFS services, mostly from IANA
2001-07-02 16:07:04 +00:00
c46620e9a9
take advantage of glob(3) support when defining _whatdb
2001-06-25 21:38:29 +00:00
797097c7d1
Another place where primes was used. Change it to moduli.
2001-06-24 17:28:05 +00:00
ca02da9f00
pim6dd.conf is gone. primes -> moduli (openssh)
2001-06-23 22:07:06 +00:00
6a7dd372b3
Do what we should have been doing long ago; use /dev/console by default as the
...
boot console tty, so that the console is on the same place that the kernel
dmesg output goes, whether wscons or serial. Users who want to use tty00
or ttyE0 explicitly can change /etc/ttys themselves.
Also use "vt100" as terminal type for /dev/console (for a reasonable baseline
that also works with wscons; pccons is long since no longer default).
This addresses PR install/13249, i386-specific, but may be appropriate to
apply to all ports.
2001-06-19 20:06:46 +00:00
684e89f355
use mktemp(1) to create temporary directories, and ensure that cleanup traps
...
are setup asap.
2001-06-18 10:54:02 +00:00
50aa483991
Improve run_rc_script():
...
- Skip files that end with `~', `#', `.OLD' or `.orig', as these are usually
scratch or backup files created by programs, and we don't want to start them.
- Only try and run non `.sh' files if they're executable.
Per discussions with Andrew Brown, and closing his PR [bin/9981].
2001-06-18 06:53:45 +00:00
f27a0c8f42
Now that "fsck -p" skips file systems that are mounted read-write,
...
always perform the disk check (unless /fastboot exists). Previously
this would only occur when booting directly to multi-user, so the
fsck wouldn't happen after a single user boot going into multi-user.
2001-06-18 06:42:35 +00:00
e3dc57afeb
Make also ed1 for 'all', create ed0, ed1 for 'floppy'
2001-06-17 11:48:09 +00:00
d7d9b87b1c
Complain if $amd_master is set. This variable was used in 1.5 and prior
...
releases, but has been ignored since an am-utils update six months ago.
This fixes [misc/11971] submitted by Jun-ichiro itojun Hagino. (Note that
$amd_flags is still supported, contrary to what the PR says).
2001-06-17 01:05:40 +00:00
919eb089e2
change mountd to use its own $mountd variable (instead of $nfs_server).
...
nfsd will complain if mountd isn't set. from [misc/13135] by Johnny C. Lam.
2001-06-16 06:13:09 +00:00
586521f84e
- Implement an optional global watchdog timeout for rc.shutdown, which is
...
enabled by setting $rcshutdown_timeout to a number of seconds to wait for
before terminating rc.shutdown. This is disabled by default.
- Use symbolic names rather than numbers when defining a trap.
- Improve some comments.
2001-06-16 04:09:19 +00:00
bd7fad6c47
use symbolic signal names instead of numbers
2001-06-14 07:50:06 +00:00
a0a111aa26
Add support files for the Walnut.
2001-06-13 15:13:24 +00:00
d201b0b96b
Add support files for the Walnut.
2001-06-13 14:53:29 +00:00
ecc1e181a0
Checking support for fcom to arm32 MAKEDEV, fixes pr 11076.
2001-06-10 22:07:23 +00:00
68536ce2c4
Fix arm32 MAKEDEV, the script for handling ttyv had a typo.
2001-06-10 22:05:44 +00:00
a81dea8eca
Remove duplicate usr/share/man/cat8/news68k added in revision 1.159...
2001-06-08 21:16:15 +00:00
8966f5524c
not usr/share/man/cat8/new68k but usr/share/man/cat8/news68k
2001-06-08 21:13:23 +00:00
a35d0a5c89
Add missign directory "./usr/share/man/cat8/news68k".
2001-06-08 16:45:37 +00:00
5fc8a3a2c4
Remove empty sections (confuse MAKEDEV2manpage)
2001-06-08 14:43:20 +00:00
cffe2f2fdb
Add some more arch-specific man8/cat8 subdirs.
2001-06-08 14:24:44 +00:00
ed9cc9d27c
scsi(4), not scsi(8)
2001-06-08 14:17:41 +00:00
c9d0f70329
Fix typoe in Jason's last change.
2001-06-08 01:34:36 +00:00
17207724f6
Update the console entries for new tty names.
2001-06-07 20:16:55 +00:00
082e7c8634
Change the serial port entries to ttyC? ("com") and ttyZ? ("zstty").
2001-06-07 20:05:13 +00:00
07afe48412
Add template fstabs for NFS and scsi disk.
2001-06-07 16:47:12 +00:00
4ce7dc7d21
add a new IANA-registered port, SSTP. (a well-known P2P protocol in Japan.)
2001-06-01 16:04:32 +00:00
47ae105daa
Add Makefile snippets to install netboot in installation/netboot
...
under ``make release''.
2001-05-28 18:21:12 +00:00
6ad0537dc7
Look after /etc/primes.
2001-05-28 14:08:50 +00:00
5362253979
Add /usr/share/man/{cat,man}8/dreamcast
2001-05-27 21:15:59 +00:00
b294089309
Add comment about how to generate MAKEDEV.8, and remove empty call units
...
section in comment (since MAKEDEV2manpage.pl expects at least one entry
per section).
2001-05-27 21:13:50 +00:00
c3f879b368
Add sd* and cd*.
2001-05-27 12:33:59 +00:00
2160ac71db
install /etc/primes for ssh
2001-05-26 23:27:13 +00:00
9e4abc4202
Added target to make maple direct access device nodes.
2001-05-26 19:06:09 +00:00
1e6d1f7076
sunndd has been renamed ndbootd.
2001-05-23 20:29:14 +00:00
b934309492
sunndd has been renamed to ndbootd.
2001-05-22 14:51:37 +00:00
281a201c49
Install the file sunndd.
2001-05-21 11:09:09 +00:00
20b5680c6f
Added sun2 etc files.
2001-05-18 00:13:27 +00:00
bc14be100e
Added rc.d support for sunndd.
2001-05-17 23:19:06 +00:00
ce7170d77d
Remove bpp before re-creating it. port-sparc64/12934 by John Heasley.
2001-05-14 09:11:10 +00:00
6534ee3cfb
When backing files listed in /etc/changelist, instead of truncating
...
to the basename of the file, use the whole path with $backup_dir
prepended, in effect mirrorring the directory tree. This eliminates
the possibility of a name collision.
Closes pr bin/12727.
2001-05-10 14:19:27 +00:00
4e1cbd39fe
Allow embedded hyphens in user names (and group names), just not as the
...
first or last character.
2001-05-10 14:10:15 +00:00
87c8919798
When using rcs to track backups, force the rcs archive to be unlocked,
...
use only non-strict locking, and leave the archives unlocked after
checking in changes.
2001-05-10 14:04:22 +00:00
54ef4cb4dc
remove the special case for ttyv0 (which was actually ttyqf renamed), per
...
discussion with matt thomas. (now the vax has 16 more ptys to use! :)
2001-05-10 01:31:40 +00:00
7fd298e837
remove all reference to ttyv* to pccons, since the kernels for these ports
...
don't implement a character device at the referenced major number (12).
2001-05-10 01:29:57 +00:00
ae5b452628
remove pcvt references.
...
don't allow pty6 (ttyv*) to be created; conflicts with pccons ttyv0.
2001-05-10 01:05:47 +00:00
702f01cdba
remove references to pcvt
2001-05-10 01:04:39 +00:00
4a8c7c2fed
don't prevent pty6 from creating ttyv*, since there's no custom console on ttyv
2001-05-10 01:03:03 +00:00
b3a31a74db
remove ttyv* entries as pcvt was removed and there's already wscons entries here
2001-05-10 01:01:42 +00:00
28d6dbb5f3
explicitly set the umask to 022 to be safe
2001-05-09 16:53:45 +00:00
4c9bb3bc3f
* change wait_for_pids() to spin forever (rather than just ~ 65 seconds).
...
* change the default `stop' case to wait_for_pids after kill $sig_stop.
this means that "/etc/rc.d/foo stop" won't return until the service
has shut down. third party scripts that implement their own stop mechanism
should offer this functionality as well.
* in the default restart case, don't bother doing `$0 poll' in between
stop & start, because of the change above. (XXX: deprecate poll ?)
2001-05-09 16:40:59 +00:00
ab72f65dcd
Don't try and use single quotes in the RHS of a ${ :+ } expansion
...
because /bin/sh needs a different syntax than ksh (and bash, etc).
Use a more obvious and less error prone method. (This complicated
use of ${:+} was only used to build the su command when running as
a separate user, but could always cause problems.)
Problem noted by Hubert Feyrer in conjunction with /etc/rc.d/sshd.
2001-05-07 07:07:11 +00:00
d768fd88a7
Enable logging options for (commented out) uucpd and fingerd by default.
...
Addresses misc/10219 by Jim Bernard.
2001-05-06 12:08:57 +00:00
ee09877887
Remove named.boot (only used by BIND 4.x).
2001-05-06 10:53:32 +00:00
e4db0897cf
Update for audio(4) from ancient okiadpcm.
2001-05-05 02:08:51 +00:00
2b60c3bb4f
Add support for selection of a kernel builtin keymap and/or a userspace
...
keymap file to wscons.conf.
Follows PR misc/12760 by Stephen Borrill, but uses the external keymap
file instead of individual key entries in wscons.conf. This saves a lot
of editing work if the map has to be switched.
2001-05-02 15:14:02 +00:00
0aaf465598
run getty on /dev/ttyE0 by default.
...
otherwise, user can't start X server.
2001-05-01 08:56:31 +00:00
96612eac97
kre notes that "echo -n" is superfluous when creating a zero length file
2001-04-29 23:57:25 +00:00
a5cfcb8b2b
Add the directory for the new sushi menu system/localtime.
2001-04-29 04:49:55 +00:00
749e2d13de
Sync with conf.c
2001-04-28 17:46:11 +00:00
312711efe8
Treat isdnd interfaces like ppp ones, and REQUIRE isdnd here.
...
Identified by Patrick Welche on current-users.
2001-04-26 03:56:20 +00:00
bd47d831a1
depend upon isdnd as well
2001-04-26 03:55:16 +00:00
f1e776b86c
minor cleanup. add note to why syslogd is here (a la note in ppp)
2001-04-26 03:54:38 +00:00
8032753ad3
Add sushi/system/sysctl to this file.
2001-04-26 02:53:46 +00:00
9b38738db9
Add all the mtree lines for the sushi procs menu. ::whine:: I hate this
...
file.
2001-04-26 02:37:59 +00:00
9cd5a025fe
Use /dev/dtyXX instead of /dev/ttyXX, and other cleanups.
...
Heavily inspired by PR 12749 from Scott Telford.
2001-04-25 23:46:12 +00:00
e595ebd705
be consistent with other scripts when temporarily setting umask to 022
2001-04-25 23:27:37 +00:00
f08a3bbdf1
wrap file creation operation in: ( umask 022 ; <command...> )
2001-04-25 23:23:37 +00:00
d2c3bd6a11
- create the default accounting file with a umask of 022.
...
- set and use $accounting_command (/usr/sbin/accton) and
$accounting_file (/var/account/acct)
- fix spelo in message
2001-04-25 23:20:15 +00:00
18a7a9feca
set the umask to 022 (remembering the previous setting) for ssh_keygen()
2001-04-25 23:18:50 +00:00
5d63f9209b
store path to ldconfig in a variable and reference that
2001-04-25 13:00:17 +00:00
3909ce4551
setup tty[p-uw-zP-T]? (kern.maxpty default = 256) instead of just tty[p-s]?.
...
on platforms which don't reserve ttyv? for console on ttyv0, set up ttyv?
2001-04-25 12:59:16 +00:00
a0cf66443f
change comment for accouting; /var/account/acct is not needed to be created
...
manually any more
2001-04-25 11:50:56 +00:00
b0cda2cf0b
If the accouting file doesn't exist, create it if possible.
...
Addresses misc/12735 by Robert Elz.
2001-04-25 11:48:22 +00:00
2add5244d8
Add the pile of directory entries for sushi's new networking menu tree.
2001-04-25 03:54:26 +00:00
a6a25381d8
The script called dhclient-script no longer lives in /etc.
2001-04-24 22:41:13 +00:00
94391160f5
bootpd lives in /usr/sbin, not /etc
2001-04-24 21:55:06 +00:00
eea58e8475
don't remove /var/tmp/vi.recover in (commented *out*) find's.
...
this fixes PR 11120.
XXX note that this is supposed never to be uncommented due to a security
issue (see /etc/daily) but there is no reason to do things doubly wrong.
2001-04-22 20:34:48 +00:00
9aba6e0cc4
Add arcpp.
2001-04-22 15:03:22 +00:00
c29d379d93
add build kernel.
...
INSTALL_TX3912 INSTALL_TX3922
2001-04-22 02:03:05 +00:00
7989fb3af8
The script called dhclient-script no longer lives in /etc.
2001-04-21 22:53:36 +00:00
17e856341b
Add GENERIC_DIAGNOSTIC to the list of kernels to be distributed.
2001-04-21 20:56:50 +00:00
d2741ad4f9
Make sure to depend and build in hp300/stand before doing ``make release''.
2001-04-21 17:58:21 +00:00
9593d5023f
Also build and install installation notes under "make release"
...
(actually snap_md_post).
2001-04-21 17:43:24 +00:00
18b3797247
add /dev/altq
2001-04-21 09:54:33 +00:00
230d9cbc0f
s/dependancy/dependency/. require NETWORK and SERVERS instead of network
2001-04-19 16:18:27 +00:00
1716d6464b
s/dependancy/dependency/. explicitly require DAEMON
2001-04-19 16:00:29 +00:00
7d15d5881b
s/dependancy/dependency/
2001-04-19 15:56:32 +00:00
3e40b73c85
Add some dirs for groff-1.16.1
2001-04-19 14:27:10 +00:00
30f8b9b5fd
add ed disk (MCA ESDI disk)
2001-04-19 07:49:00 +00:00
8490f0b0c0
* provide wait_for_pids(), which spins until all the given pids don't exist
...
* run_rc_command():
- add support for "poll", which by default, uses wait_for_pids() on
the list of matching processes
- in the "restart" case, call "poll" between "stop" and "start"
this fixes the situation where certain services (e.g, amd, squid) would
take a bit longer to shutdown after receiving the kill signal to shutdown,
and "/etc/rc.d/foo restart" would fail in the `start' phase.
2001-04-18 01:31:40 +00:00
24ba541b4e
Follow up with style commit to put the isdn nodes in major number order.
2001-04-17 01:30:30 +00:00
02e8f1f2e5
First do minimal commit to correct botch in isdn major numbers.
2001-04-17 01:28:55 +00:00
bb4e2557d0
Add usr/share/man/{cat,man}8/macppc
2001-04-16 08:20:57 +00:00
c136cf3dfe
wrap kvm_mkdb arg in "s. from adam laurie in pr 12664
2001-04-16 01:38:15 +00:00
12f6faba63
check no_swap
2001-04-13 22:31:16 +00:00
87f992edd6
Put `gated' back; we still refer to it.
2001-04-12 09:59:18 +00:00
f0492abe53
we now rely on /usr/libexec/virecover to get the work done
2001-04-11 21:02:44 +00:00
fdb63fff38
Every man section begins with a single page:
...
Add share/man/{cat,man}4/macppc, and intro.{0,4} there.
Thanks to Tsubai Masanari for help in writing it.
2001-04-06 10:47:16 +00:00
199da02c9f
Fix typos in comment.
2001-04-06 09:39:29 +00:00
dc5eda62fb
Remove references to gated, except the conflict check in rc.d/routed.
...
Noted by Launey Thomas <ljt@alum.mit.edu>.
2001-04-06 09:38:54 +00:00
f6a33791bb
clarify that ${name}_groups is comma separated
2001-04-06 06:48:35 +00:00
bd4e08b66c
Add defaults for altqd.
2001-04-06 00:37:03 +00:00
a19c4c9523
Cleanup formatting of the rpc services.
2001-04-06 00:33:33 +00:00
ceb66a1751
Add a tcp6 entry for hpropd.
2001-04-06 00:29:58 +00:00
01c28c7f10
Add a startup script for altqd(8).
2001-04-05 23:54:59 +00:00
62b732f7ac
Add ALTQ control devices.
2001-04-05 23:04:10 +00:00
c4db351748
Don't install /etc/rc.d/gated any longer, since gated isn't in the
...
base system.
2001-04-05 17:04:03 +00:00
487a5a5ba1
We don't need man/{cat,man}3/atari anymore, since libahdi is gone (and
...
has been for over a year), and nobody else installs anything there.
Remove them.
2001-04-04 13:13:59 +00:00
2811b1707a
Provide the capability of storing backups via RCS instead of just a
...
"current" and a "last" (which is useless if you wanna know what you
changed last week). Set the default to on.
2001-04-04 03:17:19 +00:00
9af306351b
Fix syntax error in r1.5 -- semicolon needed before closing brace on same line.
2001-04-01 01:32:10 +00:00
8bab066e41
dig /usr/share/doc/usd/12.ex instaed of 13.ex
2001-03-31 13:50:36 +00:00
9fdfe6878f
en_US.UTF-2 locale is obsolete. PR 12502
2001-03-31 09:35:34 +00:00
dd90695ad2
Bugfixes.
2001-03-28 20:55:27 +00:00
dcdec20e94
check existence of /etc/ssh_host_rsa_key too
2001-03-26 22:32:39 +00:00
27c0127814
auto-generate SSH protocol version 2 RSA key.
...
use newer command line syntax for ssh-keygen (-t <type>, instead of -d)
2001-03-26 22:21:26 +00:00
6f43ed148f
- Build and install GENERIC_TINY kernel on make release.
...
- Remove duplicated INSTALLATION_DIRS.
2001-03-26 10:27:15 +00:00
dff641d8e0
kpasswd is a "wait" type service.
2001-03-25 22:33:15 +00:00
938cbfedd9
Added entries for GDROM, SCI(F) and WSCONS. Also removed ttyv*.
2001-03-25 21:46:16 +00:00
4d316af9ee
Fix typo in md* device creation.
2001-03-21 20:59:35 +00:00
5de642dc8a
Create [i-p] partitions too.
2001-03-18 12:57:19 +00:00
ec058576d4
/usr/include/gssapi/rpc and /usr/include/ss are no longer used, so remove
...
them.
2001-03-18 10:03:51 +00:00
efc93d040b
Run skeyaudit (only) from /etc/daily instead of /etc/security, else there's
...
some risk that the users don't get warned if an admin turns off running
/etc/security (by putting run_security=no into daily.conf).
Fixes PR 12267.
2001-03-15 02:23:47 +00:00
a99a7deee1
Allow md5 passwords of length 34 as passwords
2001-03-12 16:48:13 +00:00
c01bf98a39
commented out entry for named_chrootdir
2001-03-12 16:13:17 +00:00
6ddd47cd37
if $named_chrootdir != "", ensure that the following files, devices,
...
and links exist:
${named_chrootdir}/usr/libexec/named-xfer
${named_chrootdir}/dev/null
${named_chrootdir}/etc/localtime
/var/run/named.pid -> ${named_chrootdir}/var/run/named.pid
/var/run/ndc -> ${named_chrootdir}/var/run/ndc
and then start named with the appropriate options to run chroot(2)ed
under $named_chrootdir as user named group named.
to take advantage of this, an admin should copy /etc/namedb ->
${named_chrootdir}/etc/namedb, and set named_chrootdir in /etc/rc.conf.
[dev/null & etc/localtime setup inspired by openbsd. i already had the rest]
2001-03-12 16:08:38 +00:00
a2c01fa479
if $named_chrootdir is defined, add ${named_chrootdir}/var/run/log to
...
the list of sockets listened to.
2001-03-12 16:04:20 +00:00
b6742129e8
move date before rcorder
2001-03-12 15:56:39 +00:00
c897860d56
Reflect correct architecture in comment.
2001-03-12 14:10:03 +00:00
0447d6c08c
Remove obsolete /usr/share/man/{cat,man}{1,3,5}/i386.
2001-03-12 12:48:47 +00:00
c8a14a309d
whitespace police
2001-03-08 19:05:13 +00:00
c1d9ab7c34
comsat is ipv6 ready
2001-03-08 01:27:24 +00:00
e254aae479
Add and delete mtree entries for the change in how scripting/logging is
...
organized in sushi.
2001-03-07 07:14:16 +00:00
f646706dac
Add the mtree entries for the new sushi subdirectories
2001-03-06 21:59:49 +00:00
703e80624d
build GENERIC_SUN4U kernel.
2001-03-04 10:14:55 +00:00
d2a924ca51
remove `falken' user; nothing depends upon it, it causes confusion about
...
whether it's required or not, and by default it's useless anyway (because
the one-hit-wonder joke with respect to its shell being /usr/games/wargames
is moot unless you enable the account)
2001-03-04 06:00:54 +00:00
f78e009eba
Don't create /dev/cpu* any more.
2001-03-03 18:06:55 +00:00
5c34a310c2
comment correction: 127/8 must not leave the node (RFC1122)
2001-03-02 03:07:29 +00:00
e64fcaf2af
Also make hup work in single user; revert dot.cshrc to atatat's version,
...
and make equivalent for dot.shrc.
2001-03-01 22:45:49 +00:00
15f19b7a16
Use "head -1" as a generic way to snarf the first line of the pid file;
...
also works with the existing alias in dot.shrc.
2001-03-01 22:30:41 +00:00
f4ad2126ae
Teach the hup alias to deal with sendmail's pid file
2001-03-01 22:26:57 +00:00
2e92ff9036
setup named chroot cage under /var/named
2001-02-28 19:22:30 +00:00
9c42e9ee42
explicitly REQUIRE mountcritremote. sort REQUIRE entries
2001-02-28 18:14:50 +00:00
a65b46cfa0
clarify purposes
2001-02-28 17:19:42 +00:00
12c191e0cc
support `resync' (ipf -y).
...
suggested by Johnny C. Lam in [misc/12300]
2001-02-28 17:03:50 +00:00
7c7983ed46
provide commented-out example for rc_fast_and_loose
2001-02-28 16:52:04 +00:00
c47a806047
various speed-ups (and related work):
...
- only load rc.conf if $_rc_conf_loaded is not set
- use case instead of if for various string comparisons
- print the date at the start of the boot as well as at the end
- if $rc_fast_and_loose is set, always run the rc.d scripts in the
current shell rather than in a subshell. this is not on by default
because it's potentially dangerous (a rogue command could terminate
the boot), but it is provided as an optional speedup for people
with slow machines that have an expensive fork
2001-02-28 16:49:18 +00:00
f9eeef1569
Sync up with the official protocol number assignments list.
2001-02-28 16:10:22 +00:00
5995b072f7
sample fstab for Flash ATA card based system.
2001-02-28 15:46:49 +00:00
21348ba66f
change console speed to 19200.
2001-02-28 15:45:02 +00:00
c5618686d5
add RCS tag.
2001-02-28 15:44:25 +00:00
33c6bf8dbc
delete floppy disk define.
2001-02-28 15:43:39 +00:00
ff6391eccb
add knowledge of SES device (4)
2001-02-28 00:07:26 +00:00
8aaa117469
remove `ingres' user & group; we have never shipped with ingres in the
...
base distribution, and packages that need a specific user & group can
create it.
2001-02-26 17:25:28 +00:00
614a276987
add named pseudo-user & group
2001-02-26 00:03:15 +00:00
4a8b1de6c4
save the world. save the trees. use :sh: in the example entries.
...
suggested by Andrew Cagney <ac131313@cygnus.com>
2001-02-21 06:50:16 +00:00
573fd4fa4d
Make sure to have rnd pseudo device.
2001-02-21 01:44:44 +00:00
a81842f91d
Changing /dev/vidcvideo0 to /dev/vidcconsole0 with backwards X compat. trough
...
a symbolic link. Part of the vidcvideo0 to vidcconsole0 renaming to allow
an easy integration of wscons for RiscPC/A7000/RC7500
2001-02-21 00:59:45 +00:00
68c0ea9798
Add /dev/leds.
2001-02-18 10:50:45 +00:00
bc9099d3bd
don't explicitly need /var/spool/lpd; it's not used by anything by default
2001-02-15 15:00:51 +00:00
337217f58f
use /var/spool/output instead of /var/spool/lpd as the default spooldir,
...
because that's what lpd, the SMM, and hier(7) has used for ages, even
if printcap(5) and this file were wrong...
2001-02-15 15:00:14 +00:00
3020c1ac92
Change output to root from auth.debug to auth.notice. It's ridiculous trying
...
to use the console when, e.g., inetd is spewing at it continually.
2001-02-12 06:08:31 +00:00
4ceebb1156
Introduce max_grouplen - this determines the maximum permitted length
...
of group names, similarily to max_loginlen
2001-02-11 09:55:09 +00:00
fac4bf8060
Add "hup" and "stop" commands. Closes PR bin/12135.
2001-02-11 00:51:35 +00:00
64ccad7179
Support files for the sandpoint
2001-02-09 22:25:02 +00:00
11b1ba1e54
Make mlx0 as part of all.
2001-02-06 19:38:31 +00:00
8d75ab98d3
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 17:05:11 +00:00
3f2f1009bc
Add ./usr/share/locale/en_US.UTF-2
2001-02-04 16:51:47 +00:00
4a733c4de9
Device nodes for wscons.
2001-02-02 22:11:52 +00:00
c714ba6dfc
zh_TW.BIG5 (alias to zh_TW.Big5)
2001-02-01 19:45:19 +00:00
2a1e10d963
Add entries for install floppy.
2001-02-01 05:52:49 +00:00
fe70df0a45
Split fd/* device entry from all target (for install floppy).
2001-02-01 05:50:30 +00:00
2ee3479198
remove sendmail-IPv4only.cf from checklist. PR 12075.
2001-01-29 09:39:46 +00:00
4e8a612eef
align $TTL with others
2001-01-28 06:59:31 +00:00
d837578f14
/etc/disklabels is obsolete -- remove it
2001-01-25 15:12:49 +00:00
4481e2ca0d
build multibyte locale modules. installed into /usr/lib/runemodule and
...
dynamically loaded at runtime.
2001-01-25 09:16:38 +00:00
64a16b4f7e
ru_SU locales are deprecated, ru_RU is now correct one.
...
rename LC_CTYPE locale declarations and vi message catalog.
From: Oleg Polyanski <luke@jetinf.com>
2001-01-22 17:48:15 +00:00
469b8f83f0
change console getty setting.
2001-01-21 18:36:32 +00:00
02ee52ee5f
hpcsh original device file
2001-01-21 18:35:55 +00:00
7759c4c1c7
do not try to install rtadvd.conf
2001-01-21 15:03:22 +00:00
14296ba1e6
make it clearer that /etc/rtadvd.conf is optional (normally,
...
configurations were derived from kernel interface settings).
install rtadvd.conf into /usr/share/exapmles/rtadvd, instead of /etc.
sync with kame.
2001-01-21 15:01:36 +00:00
1e917b6c73
add /usr/share/locale/ru_RU.*
2001-01-21 14:58:57 +00:00
b694d58ab8
Add VRRP (112).
2001-01-19 09:01:02 +00:00
04e705cf5a
Depend on "ike".
2001-01-18 04:57:48 +00:00
24753f79c0
Add a default for racoon.
2001-01-18 02:03:09 +00:00
4baa94651d
Startup script for racoon(8). Racoon provides "ike", and requires
...
"kdc" (since you might want to use IPsec on your Kerberos server,
and might be using GSSAPI to authenticate Phase 1) and "ppp" (since
racoon(8) needs to know about all of your network interfaces).
2001-01-18 02:01:12 +00:00
b170714679
The KDC requires only the network. Anyone running a KDC with
...
the binary on NFS deserves to lose.
2001-01-18 02:00:02 +00:00
d0111cc847
for MACHINE=hpcsh. straight copy of evbsh3.
2001-01-17 05:27:15 +00:00
8492c6a9e8
Add prep installer
2001-01-16 16:53:57 +00:00
411ed8da1b
Remove /etc/mail/sendmail-IPv4only.cf which is no longer needed.
2001-01-15 18:04:53 +00:00
5a911982fb
The rp capability has a fixed default value - lp - and thus needs to be
...
explicitly set in a lot of environments. Add it to the remote printer
example.
2001-01-15 15:24:14 +00:00
cb75d98f1d
Add /etc/rc.d/poffd, for x68k power management deamon.
2001-01-14 15:37:22 +00:00
410cfa811a
more dup target fixes... snap_md_post should be fixed in etc.i386
...
Makefile.inc not to work if $RELEASEDIR or $DESTDIR is not defined.
2001-01-14 06:08:24 +00:00
79c236a085
protect against multiple target definition for parse_md_post
2001-01-14 05:31:36 +00:00
502a82e9a4
add usr/share/man/{cat,man}8/prep
2001-01-13 19:38:51 +00:00
7de2724c3a
move IPv6 mode/route configuration upwards, so that !rtsol in
...
/etc/ifconfig.* is meaningful.
2001-01-13 13:26:36 +00:00
3711020b5c
extend /etc/ifconfig.xxN, for comment lines (#) and shell script
...
fragment (!). inspired by openbsd /etc/hostname.xxN.
2001-01-11 17:56:16 +00:00
6258e0bf60
Add a new variable 'backup_dir', which can be used to change the backup
...
directory from /var/backup (useful for those of us who have a separate /var
and would like to have our backup disklabels on the root filesystem).
Default behaviour unchanged. backup_dir being unset is taken as /var/backup.
2001-01-09 17:30:29 +00:00
04935f138a
Only need to "make distribution" in usr.bin/ssh once.
2001-01-09 02:13:54 +00:00
a93eaf9bc7
Add isdn devices
2001-01-08 22:26:24 +00:00
5b6d57d949
Supply enough rope to let the user disable or override all interface
...
up/down magic.
2001-01-08 12:45:39 +00:00
fd6a417d77
Group isdn devices, so "sh MAKEDEV isdn" will create them all.
...
Add apropriate entries to the archs that already have isdn support
enabled in their cdev array.
2001-01-08 06:21:19 +00:00
f9d12c2349
Don't fiddle with any isdn interface if the isdnd variable is set to NO
...
in rc.conf.
Actually do install the isdnd script.
2001-01-07 17:53:36 +00:00
15a3b3b6e1
Add startup script for isdnd.
2001-01-07 17:04:49 +00:00
1ab6aa7287
s/ramdisk/xminiroot/
2001-01-07 09:31:17 +00:00
6c5434ca81
Add /usr/share/examples/isdn
2001-01-06 14:45:57 +00:00
7b07af406e
Add ISDN devices.
2001-01-06 13:47:44 +00:00
a5211f152e
create /usr/include/readline
2001-01-05 21:32:34 +00:00
e56f95eaf0
Add all the new /usr/share/sushi directories
2001-01-05 07:00:31 +00:00
5bcac3e56c
Add the subdirectory for /usr/include/cdk
2001-01-04 21:04:43 +00:00
6c348b2e2e
add $ip6sitelocal, to control installation of reject route for fec0::/10.
2001-01-03 17:54:04 +00:00
0ce4a9a0de
Use highest bit of minor as an extra bit for the partition number to
...
bump the maximum partition number on NetBSD-i386 to 16. (Approved by fvdl)
2001-01-02 23:06:54 +00:00
6d62925a7c
/etc/openssl/cert.pem is a file, not a directory. PR 11772
2000-12-31 07:32:33 +00:00
b60001d78d
move tcp6/udp6 entries upwards so that they do not get out of sync with
...
IPv4 services. add kerberos-adm and internal services (like echo) on tcp/udp6.
2000-12-31 06:06:50 +00:00
829de9dbd3
Add Note: about uncommenting font line to use 80x50 screens.
2000-12-31 01:22:14 +00:00
3207cfe8dd
install sample configuration files into /usr/share/examples/racoon.
...
make variable "SBIN_RACOON" will build static racoon binary, and installs
it into /sbin (nonstandard)
2000-12-29 03:16:39 +00:00
1491d54799
Nuke b0 entries since they are not used anymore.
2000-12-29 03:05:04 +00:00
9a441d9bb8
dig /etc/racoon
2000-12-29 02:43:42 +00:00
144e2eb120
Add wd*.
2000-12-27 22:21:47 +00:00
d31d542a97
populate citrus xpg4dl locale definitions into /usr/share.
...
if there are any mistakes, please report (i only speak English/Japanese).
currently, only singlebyte locales are usable.
TODO: enable multibyte handler in libc - there still are few design
discussions, but we are almost ready.
2000-12-22 01:31:47 +00:00
47a48d2057
Add two more SCSI disks for the floppy. See PR 9912.
2000-12-19 22:39:34 +00:00
c5ddb89d6e
Patch from Hubert. aliases never get rebuilt if aliases.db is never originally generated.
2000-12-18 07:56:41 +00:00
cfe1eed228
Make the node for the bpp device [parallel port].
2000-12-16 22:04:14 +00:00
6eef11f223
- describe what rc.shutdown does, and what invokes it
...
- remove `.sh' suffix on script name in description
2000-12-15 00:00:09 +00:00
83334549fb
Initial import of port "dreamcast" (cloned from port "evbsh3").
2000-12-11 18:19:12 +00:00
02ab8e1e3f
nuke /usr/share/lkm - kernel modules are inherently depedant upon kernel,
...
so the example lkms should be included in kernel sets only; furthermore,
the stuff was highly outdated
relevant items will be moved to lkm(4) and under syssrc/sys/lkm/
2000-12-11 13:44:00 +00:00
6b0841e32b
Fix PR port-mac68k/11343
2000-12-07 10:57:17 +00:00
02031bda76
Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
...
support was already in $MACHINE/$MACHINE/conf.c.
2000-12-05 18:18:04 +00:00
0889c2ba96
Make iop device files.
2000-12-03 13:23:12 +00:00
4275d75e69
Correct comment for KERNOBJDIR.
2000-12-02 18:04:45 +00:00
13e5202536
Get the TARGET_ENDIANNESS by running ${CC} -E over
...
<machine/endian_machdep.h>. Fixes problems where
<machine/endian_machdep.h> just includes another file
without defining _BYTE_ORDER itself.
2000-11-30 11:31:05 +00:00
da9feda63a
Remove watchdog before creating it. Keeps the same behavior as the rest of the creates
2000-11-30 07:33:52 +00:00
2eabb2676b
We do not use INSTALL_SMALL any more.
2000-11-28 03:18:18 +00:00
thorpej