CONFIG_CNTRL bits by making the "conn" argument to epconfig()
a u_int, not a u_int16_t, and by defining 100mbit media
bits in the upper 16 bits.
A redesigned interface that fixes this properly is in the pipeline.
comments in pr port-i386/2358: "if_ep/3C590 no longer working"
* Only call Vortex media-config code on PCI-attached devices, until
we know if it works on ISA and EISA large-packet devices also.
* Fix typo in printf of MAC address
rather than unknown.
* Look for 100mbit interfaces, and for any present, set corresponding
bits in `conn' argument to epconfig(). epconfig() will now print
100Mbit media by name.
look for 100mbit Xcvrs, print their names, add to ep_connectors.
* Print 10baseT as 10baseT, since media name (utp) is no longer a unique
transceiver type.
* Redo FIFO memory size printing, also show Tx/Rx split (xxx isa 3c509?).
* Print MAC address on a separate line, with 100Mbit media and fifo-ram
info it no longer fits on the same line as media types.
* Comment the fact that the "connection" media-selection code just doesn't
grok 100Mbit media.
* add code to look for 3c59x/3c90x media-select and autoconfig bits, though
we don't yet dynamically probe media when the autoconfig bit is set
(see previous bullet).
* XXX the whole connector/media code should be redone, perhaps a' la
the BSDI ifmedia design.
For now, we really only need 8 bits of media type.
* Add bogus definitions for 100mbit transcievers, to be set in the
"conn" argument to ep_config(). Should really use the same bits
as in EP_W0_CONFIG_CTRL bits, but I don't know what bits the 3c515
&c use for 100mbit media.
* Define bitflags for 100Mbit transceiver options in ep_connectors.
* Add definitions of powerup/powerdown commands. for interfaces with
power management. Should send a powerup after APM resume?
* Add definition of fragment-busmaster (vortex) START_DMA command.
* Add definition of PCI configuration-space media-present bits.
(really just EP_W3_RESET_OPTIONS remapped into pci config space.)
* Add comments describing what the #define's above are used for.
For now, we really only need 8 bits of media type.
* Add bogus definitions for 100mbit transcievers, to be set in the
"conn" argument to ep_config(). Should really use the same bits
as in EP_W0_CONFIG_CTRL bits, but I don't know what bits the 3c515
&c use for 100mbit media.
* Define bitflags for 100Mbit transceiver options in ep_connectors.
* Add definitions of powerup/powerdown commands. for interfaces with
power management. Should send a powerup after APM resume?
* Add definition of fragment-busmaster (vortex) START_DMA command.
* Add definition of PCI configuration-space media-present bits.
(really just EP_W3_RESET_OPTIONS remapped into pci config space.)
* Add comments describing what the #define's above are used for.
of the old zzhack-access macros, which with the current macro definitions
would cause a cast value to be used as an lvalue, which is a gcc extension,
but _not_ what we want.
and address() macros with new macros of the same names (to get values),
and macros with those names but with "set" prepended and which take a
second argument (to set values). The new macros use type casts to do
type conversion, which is much cleaner than using a union and making
endianness-related hacks to get the right 'short's and 'char's from
the right array indices. (YUCK! again, for good measure.)
* in autofetch mode, don't retry a file if the connection failed - skip it
and move to the next file. [bin/3051, Matt Green]
* only print error messages from SIZE or MDTM if the user used 'size' or
'modt' (respectively). prevents extraneous warnings during normal transfers
when connected to a site which doesn't support these (behaviour prior to
last commit), but still allows error feedback to specific user requests
for this info (which the last commit broke).
* 'account': only accept one optional argument
* if invoked as pftp, default to passive mode on (from FreeBSD)
* remove leading '0 ' in progress bar - looked ugly
* use warn instead of perror
* use strncpy when src isn't known to have safe length
* remglob(): use mkstemp() to prevent symlink games, and don't override
_PATH_TMP, use it as the prefix to the temp file
getting the 'bootpreference' ourselves when it is not set to any legal
value.
- Because the relation between memtop/membot and the video base does not
hold on the Hades, skip testing on it.
above the home dir which is only group acessable:
directroy owner group permission
/a root wheel 755
/a/b root b 750 <
/a/b/c c b 700
/a/b/c/.rhosts c b 600
add getegid and initgroups before and setegid behind fopen to fix this.
add <netgroup.h> for the prototype of innetgr.
