c9b3657ce9
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:33:28 +00:00
9bb77522c1
Use CFATTACH_DECL().
2002-09-30 21:31:52 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
9d2580ff16
add RCSID
2001-11-13 07:56:39 +00:00
0cf4cbfa39
Use ISACF_*_DEFAULT rather than *UNK.
2001-09-26 01:17:16 +00:00
aaad4d0284
Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq
...
being set in pnp mode.
2000-12-19 01:09:15 +00:00
80b776d037
Use NMPU instead of NMIDI so that it can compile without mpu attachment.
...
Requested by Izumi Tsutsui.
1999-10-18 05:11:39 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
6ada3afd8b
Reject variant numbers which are too large (so that a new version of isapnpdevs
...
with an old driver will not lose mysteriously).
1999-03-22 10:00:09 +00:00
2cccf3bd4a
Update callers of isapnp_devmatch().
1999-03-22 09:44:12 +00:00
878708a06b
Adjust for MPU attachment change.
1999-03-22 07:41:36 +00:00
4822d3d0b0
Move IRQ setup into frontend. Need to move DRQ handling as well.
1999-02-19 16:10:44 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
bdb2269a46
Create a master list of pnp logical and compatibility device codes instead
...
of hard-coding it into each driver and use a centralized probe function.
1998-07-23 19:30:44 +00:00
d2e377891d
Get the interrupt share type from the PnP info.
1998-06-29 22:42:32 +00:00
5bc2217a49
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:24:55 +00:00
129eab3152
Adjust for the changes to the ISA DMA API.
1998-06-09 00:05:19 +00:00
74545baf39
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
...
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
ddf189f7da
Remove the stuff that was apparently not intended for commit in the
...
previous change.
1998-04-13 22:18:03 +00:00
993dcaa947
Add another device, YMH0021. From nathanw@MIT.EDU, PR #5289 .
1998-04-13 13:19:40 +00:00
9db8348725
Cosmetic change; use tab of width 8.
1998-02-22 05:14:34 +00:00
605c219597
Add ID for the Vibra16X PnP board (aka CT4170).
1998-01-30 11:42:51 +00:00
985f99fe00
Don't initialize softc's space tags/handles until isapnp_config() has
...
been called. Pointed out by Lennart Augustsson.
1997-12-17 01:31:59 +00:00
8e7686a76b
make it compile without "__BROKEN_INDIRECT_CONFIG"
1997-11-30 15:13:30 +00:00
e86b728748
Remove broken PnP id again.
1997-11-20 08:53:39 +00:00
f1a39fe2df
Recognize another card and handle the case when both drqs are the same.
1997-11-18 19:24:46 +00:00
ba76377205
Make an XXX note about the broken ALS id.
1997-11-18 19:17:21 +00:00
fe3e796d68
Dropped an else in last commit.
1997-11-18 11:34:50 +00:00
c622832eb0
Add another card and take care of swapped drqs.
1997-11-18 11:27:04 +00:00
edf79539db
Add another SB AWE64 Value.
1997-10-15 05:13:31 +00:00
7bc1f9d060
Recognize SB AWE64 Gold.
1997-09-13 13:37:28 +00:00
7826bcb58c
add support for generic SBs by matching compatIDs
1997-08-03 08:31:00 +00:00
379f3b1c05
add device ID for SB AWE64 Value; from William Coldwell in PR kern/3716.
...
also add comments for some device IDs describing what they match.
1997-06-18 07:19:08 +00:00
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
27d98ef0db
add support for AD181[56] SBPro emulation
1997-04-10 06:33:16 +00:00
93b36b663d
PR/3388 from Tatoku Ogaito: Add product id for another soundblaster PnP card.
1997-03-25 15:16:49 +00:00
9bc57d2244
Add PnP ID for SB AWE32.
1997-03-21 00:49:38 +00:00
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
9733b260cd
Add a match for the ESS1868; from herb...
1997-03-13 01:45:11 +00:00
cf455412fc
Plug and Play support.
1997-01-16 22:00:57 +00:00
thorpej