/dev/power.
XXX - due to the way interrupt handling is structured we have no easy
way to defer clearing the button interrupt until the sysmon callback
has happened and the event is dispatched. We clear it imediately on
return from the interrupt handler. This means we get an interrupt storm
until the button is released, and then start to handle it.
This needs to be fixed! (But with the default application for the power
button does not make a user visible difference.)
- handle devices which has no OBP node.
- move PCI latency-timer initialization from pci_intr_map to
pci_enumerate_bus.
- make PCI bus free space extents for cardbus devices.
- fix PCI config space map size.
- some code integrations.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
UPA is just a physical incarnation of our mainbus0.
Evidence:
- There can only be one!
- The firmware node coresponding to it is the root of the OF tree
So: remove the unused (and uncompilable) upa.c, remove upavar.h after
moving the only declaration used from it to autoconf.h.
This argument has been previously unused, thus undetected due to void*
typing. Mmm, copy & paste. Note that sparc got it right though.
Many thanks to Valeriy E. Ushakov <uwe@netbsd.org> for debugging support.
Slightly different to the patch suggested by Takeshi Nakayama in PR 18451
(idea from FreeBSD).
Additional input from Jason Thorpe: do not hard code the bus frequency,
instead get it from OpenFirmware.
- use struct vm_page_md for attaching pv entries to struct vm_page
- change pseg_set()'s return value to indicate whether the spare page
was used as an L2 or L3 PTP.
- use a pool for pv entries instead of malloc().
- put PTPs on a list attached to the pmap so we can free them
more efficiently (by just walking the list) in pmap_destroy().
- use the new pmap_remove_all() interface to avoid flushing the cache and TLB
for each pmap_remove() that's done as we are tearing down an address space.
- in pmap_enter(), handle replacing an existing mapping more efficiently
than just calling pmap_remove() on it. also, skip flushing the
TSB and TLB if there was no previous mapping, since there can't be
anything we need to flush. also, preload the TSB if we're pre-setting
the mod/ref bits.
- allocate hardware contexts like the MIPS pmap:
allocate them all sequentially without reuse, then once we run out
just invalidate all user TLB entries and flush the entire L1 dcache.
- fix pmap_extract() for the case where the va is not page-aligned and
nothing is mapped there.
- fix calculation of TSB size. it was comparing physmem (which is
in units of pages) to constants that only make sense if they are
in units of bytes.
- avoid sleeping in pmap_enter(), instead let the caller do it.
- use pmap_kenter_pa() instead of pmap_enter() where appropriate.
- remove code to handle impossible cases in various functions.
- tweak asm code to pipeline a little better.
- remove many unnecessary spls and membars.
- lots of code cleanup.
- no doubt other stuff that I've forgotten.
the result of all this is that a fork+exit microbenchmark is 34% faster
and a fork+exec+exit microbenchmark is 28% faster.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
sysio streaming buffer flushes write a single 8-byte aligned 8-byte
value.
psycho streaming buffer flushes write a 64-byte aligned 64-byte block.
So separate out the streaming buffers into their own structure and pass those
in to all iommu operations. This also means we only flush the correct
streaming buffer for psycho rather than needing to flush both just in case.
