Removed some un-necessary cache synchronisations.
Call the cpu_sleep() function in an infinite loop in halt().
Removed the long dead swap specifier from rc7500 initarm().
the only timings we know are the ones inherited from the boot and the
drivers that will attach to the bus may change these.
Use the IS_PODULE macro for checking manufacturer and podule id's
against attach args.
PROFILE_ASM are defined.
Added missing .data directive prior to the curpcb declaration.
Fixed the calling of the cpu sleep function in idle(). The sleep function
takes a single argument which is the sleep mode. This is currently unused
but 0 should be passed for future compatibility.
sense code for zero and if found repeat the request sense. This solves
a bug in the sbic driver when accessing JAZ drives that results in
faulty sense data being returned following a transfer. A retry returns
the correct information.
This is probably showing up a more fundemental bug in the sbic driver
and will probably have to wait for a complete overhaul of the sbic
driver (planned) for a perfect fix.
Fix supplied by Rob Black <r.black@ic.ac.uk>
shift value thus making register more flexible.
Remove the absolute shift of 2 in all the podule read/write routines and
use the tag cookie (passed in r0) as the shift value.
register shift value.
For the podulebus_bs_tag structure set the shift to 2 (the current
hardcoded value in the actual read/write routines).
Use the cookie to provide the register shift in podulebus_subregion().
MMU is not yet initialized. This behaviour is necessary when probing
for the machine type - because we need the type before we can setup the
tables....
- Add grfvideo_mode->disp_flags to select interlace, doublescan,
sync-on-green and horizontal/vertical sync polarity.
- Add some constants for grfvideo_mode->disp_flags.
This fixes a wrong output from grfconfig /dev/grf[23]
- changes for the grfconfig interface:
- Remove gv->hblank_stop and gv->vblank_stop.
- Only print doublescan and interlace flags. Horizontal/vertical sync
polarities are not yet supported and sync-on-green will never be
supported.
- Remove gv->{hblank_stop,vblank_stop} and use the other grfvideo_mode
values to set ba->data.
- Add gv->disp_flags to select interlace.
- Not yet supported are: doublescan, sync-on-green and the horizontal/vertical
sync polarity.
This makes it possible to use xfree values for grfconfig.
- changes for the grfconfig interface:
- Remove gv->{hblank_stop,vblank_stop} and calculate HBE and VBE from
gv->{htotal,vtotal}.
- Add support for gv->disp_flags to select interlace, doublescan and
horizontal/vertical sync polarity.
- Return EINVAL for gv->disp_flags and sync-on-green.
This makes it possible to use xfree values for grfconfig.
- Use interrrupt #6 instead of #2. #6 is the default interrupt and there
seems to be a problem with Cyberstorm 060 and #2.
- Set the interrupt register before enabling the interrupt.
- GC M2INS
- minor cleanup
- Switch from +hsync/+vsync to -hsync/-vsync.
- changes for the grfconfig interface:
- Remove gv->{hblank_stop,vblank_stop} and calculate HBE and VBE from
gv->{htotal,vtotal}.
- Add support for gv->disp_flags to select interlace, doublescan and
horizontal/vertical sync polarity.
- Return EINVAL for gv->disp_flags and sync-on-green.
This makes it possible to use xfree values for grfconfig.
the locators.
In wdcprobe_internal() set the WDCF_32BIT flag if the data32 io handle
is set.
All transfers to and from the data register now check for softc flags
to see if 32 bit transfers are enabled i.e. reading drive parameters
and doing a dump will use 32 bit transfers as well.
of cache-index incompatible virtual mappings for a physical page may be
required for hardware without secondary (level 2) cache to detect and
correct virtual coherency problems. I'm not sure this is really needed
anymore, since pmap_prefer() took care of of the cache-index
incompatible mappings that I have seen. Count the times a page is
cache inhibited in enter_stats if DEBUG.
Wait for memory instead of panic() on failure to allocate a page for the
segtab or segmap [from OpenBSD arc port]. Also check for malloc()
failure on allocation of a new pv entry and panic().
Increment resident_count when adding a new page to a pmap [also from
OpenBSD]. Process resident size is now valid.
matt