- use DMA in 28-bit LBA addressing.
- use PIO in 48-bit LBA addressing.
Idea and message are from FreeBSD, and tested on M5229 rev. 0xc3 in
my Sun Netra X1 with 160GB drive.
the base personality type in the low byte and
various flags in the upper bytes. for now just mask off
the flags to make sure the base type is one we accept.
store the current personality in the emuldata so that
we can return the expected value for PER_QUERY.
truncate64
ftruncate64
profil
ioperm
iopl
setdomainname
modify_ldt
statfs64
fstatfs64
note that iopl(), ioperm() and modify_ldt() just call
the respective 64-bit handlers, which don't do anything yet.
included in the "type" parameter. in linux_sys_sendmsg(),
if we see an SCM_CREDENTIALS control message, just drop it
instead of giving an error. the linux and native versions of
the cred-passing operation are very different and some apps
(eg. linux pulseaudio library talking to a native server)
will work without the control data.
Tested the following multifunction card and devices over ppb(4)
on Express5800/230 (JC94):
---
uhci0 at pci0 dev 4 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x61)
uhci0: interrupting at int C
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 4 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x61)
uhci1: interrupting at int C
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 4 function 2: VIA Technologies VT8237 EHCI USB Controller (rev. 0x63)
ehci0: interrupting at int C
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
fwohci0 at pci0 dev 4 function 3: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x46)
fwohci0: interrupting at int C
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:08:00:37:02:79:4f
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vge0 at pci0 dev 4 function 4: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at int C
vge0: Ethernet address: 00:01:08:00:b1:71
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
:
---
ppb0 at pci0 dev 4 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 0x05)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 4 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex0: interrupting at int C
ex0: MAC address 00:01:03:ce:74:48
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci1 dev 5 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex1: interrupting at int C
ex1: MAC address 00:01:03:ce:74:49
bmtphy1 at ex1 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
:
XXX: using timo == 0 to mean "sleep as long as you like, and forever
if you're really tired" is not the smartest interface considering
the the hz/n idiom used to specify timo. This leads to unwanted
behaviour when hz gets below some impossible-to-know limit. With
a usec2ticks() routine it at least be a little more tolerable.
