5e2f81a0cf
Regen.
2001-03-31 09:08:06 +00:00
27fcb60ea5
Add Cyrix products (MediaGX).
2001-03-31 09:06:45 +00:00
5f670bebfc
Initialize the entire pmap table before populating it.
...
This addresses pr 7174
Thanks to Christian Limapch for diagnosing the problem.
2001-03-31 09:05:21 +00:00
c13ba16f2b
Fix an uninitialized variable reference in cpu_fork().
...
Reported by Tad Hunt <tad@entrisphere.com>.
2001-03-31 07:50:59 +00:00
41833a3286
comment out device register structure definitions, used for reference only.
...
remove unnecessary BUS_SPACE_MAP_LINEAR when mapping ethernet dma registers.
2001-03-31 06:56:54 +00:00
2323af4522
Have an indivisual rule to build magic.mgc.
2001-03-31 01:31:49 +00:00
624afadeeb
note MCA ate(4) attachment, Xref properly
2001-03-31 00:48:03 +00:00
5f3d9f1da2
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
Tested with AT1720T, card donated by David Brownlee.
2001-03-31 00:43:05 +00:00
803c0c7eda
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
2001-03-31 00:43:04 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6f8f19b16e
fix typo in comment
2001-03-31 00:30:22 +00:00
592dfdc76b
Prepare for MCA attachment:
...
* split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device
definition to conf/files
* cosmetic: attach with ate_isa
2001-03-31 00:26:53 +00:00
d04f4ebff1
WSDISPLAY_FONTENC_SONY is gone.
2001-03-31 00:14:32 +00:00
6b982beac1
Call softintr_init()
2001-03-31 00:10:03 +00:00
3e4cc841a7
Add softintr and ISA bus support
2001-03-31 00:08:34 +00:00
a03b2aaaf0
Reverse previous commit - isa headers don't belong in /usr/include
2001-03-31 00:05:57 +00:00
d3a8b4016e
Add isa_machdep.h and isapnp_machdep.h
2001-03-30 23:59:19 +00:00
0ca4ab64ac
Add ISA serial port device
2001-03-30 23:54:45 +00:00
9641e5d860
Probe ISA bus devices
2001-03-30 23:52:05 +00:00
dd068f675e
Changes to interrupt architecture for softintr support
2001-03-30 23:51:14 +00:00
cdba0ef41c
Add some ISA bus cards
2001-03-30 23:49:37 +00:00
7cf783665e
Please preserve copyright notices modified by Ben Harris since the a.out and
...
ELF structure loadings are of his design from BBBB
2001-03-30 23:49:06 +00:00
1b6e2e02dd
Add files for ISA bus and softintr support
2001-03-30 23:47:58 +00:00
8cd59636b4
Support for ISA expansion slot in Mips 3230
...
The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
2001-03-30 23:45:18 +00:00
7d798b3ef7
Initial ELF kernel loading for RiscPC/A7000/NC based on Ben Harris's work
...
Since arm32 isnt switched to ELF yet its not completely tested; It loads
a kernel but then hangs on symbol table loading; propably a ELF/a.out
symbol table conflict.
Also cleaned up the code a bit
2001-03-30 23:44:58 +00:00
154a3bba69
use MI softintr
2001-03-30 23:28:00 +00:00
5d03735614
Move most interrupt functionality to arch/mipsco/mipsco/interrupt.c
...
Remove old style soft interrupts to favor MI softintr support
2001-03-30 23:26:29 +00:00
09d79c4b1f
New data structures and prototypes for MI softintr support
2001-03-30 23:23:37 +00:00
273d283d25
Implement MI softintr functions (softintr_establish, softintr_schedule etc)
2001-03-30 23:21:30 +00:00
9477a9256c
Re-implement bus_space(9) functions:
...
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
2001-03-30 23:17:03 +00:00
cc02f1c898
Updated Kjetil's email address as requested in port-arm32/8787.
2001-03-30 22:56:15 +00:00
0bd89f34ee
add fiir [from mycroft]
2001-03-30 22:38:33 +00:00
49b162566a
Bump va_blocksize for the map files some more, so that programs with
...
quite a few mappings have a chance of being handled correctly if
st_blksize is looked at.
2001-03-30 20:25:11 +00:00
a22b0cbf4d
Optimize bswap16() and bswap32() functions to inline assembly.
2001-03-30 20:00:05 +00:00
9f531a91bb
regen - use linux_sys_nosys() instead sys_nosys()
2001-03-30 18:33:22 +00:00
bbe1ee69af
Use linux_sys_nosys() instead sys_nosys() here too.
2001-03-30 18:31:28 +00:00
02281ec1f5
regen
2001-03-30 18:02:28 +00:00
c51fe2a452
use UNIMPL instead of NODEF for the dummy syscalls 218, 219
2001-03-30 18:01:20 +00:00
36a42f0ce8
Add new syscalls from Linux 2.4.3 to the lists. Not implemented ATM.
2001-03-30 17:59:46 +00:00
59771e308b
Globbing should match broken symlinks. stat()->lstat() to fix this.
2001-03-30 17:45:00 +00:00
95fda43dd5
make all debugging messages conditional on sc->sc_debug.
2001-03-30 17:30:18 +00:00
e07a93ab5a
regen
2001-03-30 17:18:47 +00:00
890850dddf
Implement linux_sys_nosys() and use it instead of sys_nosys() for
...
unimplemented syscalls. Difference is that linux_sys_nosys() doesn't
post SIGSYS to the process. Linux doesn't do that and thus glibc (and
probably other Linux code) doesn't deal with SIGSYS, even through it
generally contains fallback code for ENOSYS case.
This also addresses port-i386/12503, though the issue was already discussed
earlier.
2001-03-30 17:16:33 +00:00
466a79b36b
Make it possible to use different function for unimplemented syscalls
...
than sys_nosys().
2001-03-30 16:56:36 +00:00
30b7c151f0
AEN 0x000c appears to mean `init started'. From lukem.
2001-03-30 16:48:57 +00:00
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
6b3108e0aa
Revert previous overzealous change, committed in error.
2001-03-30 16:12:44 +00:00
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
28f83415ad
Update TODO list.
2001-03-30 15:53:25 +00:00
6a18583c73
Add yds.
2001-03-30 15:23:44 +00:00
minoura