d13e6a84f2
Sleep a little when closing the midi device to allow the UART to drain.
2001-01-27 18:37:01 +00:00
c501a146a0
regen
2001-01-27 13:19:48 +00:00
be66040d49
add product
...
I/O DATA USB-RSAQ(discon.)
2001-01-27 13:19:27 +00:00
3edd34f0be
More #if's. This needs some serious rototillage, but a few #if's will
...
suffice for now.
2001-01-27 02:13:34 +00:00
22189b442b
Add a few siop_table_sync() calls.
2001-01-26 22:00:01 +00:00
05b5119cdf
Fix a 4 byte ovferflow in an array:
...
resel[sizeof(load_dsa) / sizeof(load_dsa[0])] is 25, not 24.
2001-01-26 21:58:56 +00:00
01c89cec5c
No need to submit before poll any more.
2001-01-26 19:53:15 +00:00
c4a426333f
My.. what a twisty little maze of #defines and dependencies. Some of this
...
code is used for more than anticipated, and I missed a few checks last
night. Thanks to Bernd Ernesti for poking me about this.
2001-01-26 14:06:16 +00:00
cf9b8e8210
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem device ID.
2001-01-26 11:04:20 +00:00
2b15bcc35b
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem support.
2001-01-26 11:02:18 +00:00
6939097e75
Add left/right reversal quirk entry for Toshiba Protege 7020
2001-01-26 10:04:43 +00:00
30dcc3b36e
regen
2001-01-26 10:04:12 +00:00
2f324bf9a0
Add Toshiba Protege product code
2001-01-26 10:03:47 +00:00
8ec736c069
Add quirk for Compaq Armada M700 to fix left/right channel reversal.
...
Quirk entry provided by Joachim Koenig-Baltes <koenig@cms.tecmath.com>
2001-01-26 09:22:18 +00:00
095bcc2e62
regen
2001-01-26 08:04:40 +00:00
f6dbeb0440
Add product code for the Compaq Armada M700 Notebook
2001-01-26 08:02:46 +00:00
e47b177bc0
Nobody calls these bits if we arn't doing RAID5 with rotated spare stuff.
...
Add an #if.
2001-01-26 05:16:58 +00:00
1763f954c7
These bits are only needed for the interdecluster stuff.. wrap them
...
with an #if.
2001-01-26 05:09:13 +00:00
7833c33e99
Whoops.. Leave them on.. (for now.)
2001-01-26 04:43:16 +00:00
a40eef11ac
Give the parity declustering code their own 'RAID arch' types, and
...
allow us to turn them off if desired.
2001-01-26 04:40:03 +00:00
61a2ee28fb
Lots of stuff here that is only used for some of the 'fancier' RAID types.
...
Don't compile it if we arn't going to use it.
2001-01-26 04:27:16 +00:00
bcc70a3f37
Clean up some INDENT warnings. (yes, these have been there for a while!)
2001-01-26 04:14:14 +00:00
0a5ca1547d
Various parts of this file are only needed by the even/odd and PQ
...
RAID types. Don't include those bits if we arn't doing even/odd or PQ stuff.
2001-01-26 04:05:08 +00:00
9880e186ec
Don't build the stuff in this file if RF_INCLUDE_EVENODD is not defined.
2001-01-26 03:50:53 +00:00
c77d3c20a8
Ensure we update the 'partitionSize' field of the component labels
...
when doing a reconstruct or a copyback. If we don't, junk might be
there, and that could cause the component to be not correctly
autoconfigured on reboot. Thanks to Simon Burge for helping track this down.
2001-01-26 02:16:24 +00:00
b8569c0b8e
The previous revision was my fault. audio_calcwater() needs to be
...
called at every open.
Thanks Witold J. Wnuk for pointing out this problem.
2001-01-25 15:25:34 +00:00
b2457f9a76
Move NEWS keymap file into MI place to share with news68k.
2001-01-25 13:13:59 +00:00
fa52d46203
more datasheet
...
but same...
2001-01-24 14:46:49 +00:00
c54894efe9
IMPROVEMENT: use tsleep() instead of delay(). Kernel do not stop
...
during card insertion, deletion and power change.
2001-01-24 10:10:04 +00:00
840a1d7e2b
Fiddle enough with the tty so that it wakes up on detach and drops
...
the reference count on the ucom.
2001-01-23 22:06:25 +00:00
4b0119383e
Ad support for an extra message in the ucom attach code.
2001-01-23 21:56:17 +00:00
0156530592
Null out pointers when closing pipes.
...
Try to wake upper layer on error.
2001-01-23 21:22:57 +00:00
af1fabe1bc
There are more ports than meet the eye on the Visor. Connect a ucom
...
to each of them.
2001-01-23 21:19:44 +00:00
7bb669ca3e
Fix up license.
2001-01-23 20:51:01 +00:00
c5fe587d24
Oops, be sure to clear the ATTN interrupt on error.
2001-01-23 20:47:02 +00:00
10ca4fd232
cause the "delete" key to actually send \177 like it used to
...
(and still does with pccons) rather than \033[3~ ...
2001-01-23 19:25:14 +00:00
82a01b7eeb
Regen.
2001-01-23 19:24:19 +00:00
af31089a6d
Re-add $FreeBSD$ RCS Id for the purposes of synchronization tracking.
...
This is not unprecedented, as we do it in >100 places in the tree.
If you disagree with this philosophy, take it to tech-kern for a discussion
FIRST before reverting; TNF, not one particular person, owns this file.
2001-01-23 19:24:00 +00:00
23cffa82c7
Rearrange detach code so it is more likely to survive detaching an open
...
device (it's still not waking up readers properly).
2001-01-23 17:35:58 +00:00
f11510dd0a
add missing Weasel command.
2001-01-23 17:18:23 +00:00
5e8cefc2ea
Ad function to remove a usb task.
2001-01-23 17:04:30 +00:00
a88f037c70
MAke USB_DEBUG turn on UVISOR_DEBUG.
2001-01-23 17:03:19 +00:00
cbda952879
Make sure driver attach/detach events are generated in a consistent manner.
2001-01-23 14:04:13 +00:00
7fd4b01030
Change matching condition (we don't want to match on interface for this
...
type of device).
Don't generate a device detach event since there's no attach event.
Minor cosmetic changes.
2001-01-23 13:48:06 +00:00
51ee272c28
simple datasheet
...
http://www.nisseisg.co.jp/jyouhou/_cp/@gif/2303.pdf
but not include register :<
2001-01-23 10:10:22 +00:00
2b4a1ad203
increase size of UPLCOM{I,O}BUFSIZE
...
enabe uplcom_break
2001-01-23 08:15:58 +00:00
bcb0a27722
Regen; added Xircom CreditCard Token Ring II.
2001-01-23 05:42:43 +00:00
ad4bfb4606
Add Xircom CreditCard Token Ring II (woo, I found my card!)
2001-01-23 05:42:12 +00:00
db3f510ee6
s/2000/2001 :-)
...
and typo.
2001-01-23 02:36:17 +00:00
3a36335ddf
Don't turn on the dubug flag by default.
...
Don't print interface class/subclass; it's pointless since the device
doesn't follow any standard class definition.
2001-01-23 02:25:02 +00:00
d324979aed
Add uplcom.
2001-01-23 02:18:30 +00:00
1227a240f1
driver for Prolific PL2303 serial adapter.
...
I/O DATA USB-USAQ2 work.
2001-01-23 01:24:10 +00:00
fe3273fbb4
Patch from PR kern/8001, submitted by Rafal Boni.
...
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
2001-01-22 22:28:43 +00:00
e055513a28
Nuke useless argument to ld_twe_dobio().
2001-01-22 21:56:11 +00:00
69fd9caaae
Don't IFQ_SET_READY() -- this driver isn't ALTQ'ified.
2001-01-22 21:38:35 +00:00
7575649e53
Minor optimisation.
2001-01-22 17:44:28 +00:00
03463e18f1
opt_twe.h isn't needed any more.
2001-01-22 17:40:14 +00:00
8771c04bd1
Don't artificially clamp the maximum number of outstanding commands.
2001-01-22 17:38:23 +00:00
9c7e523b64
- Complain if interrupt-driven retrieval of AENs fails somehow.
...
- Clamp the number of outstanding commands to 129.
- Other tweaks.
2001-01-22 17:32:11 +00:00
9e7736f1dc
make patches[] const
2001-01-22 14:30:43 +00:00
29d563fd5b
regen: US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry added
2001-01-22 14:18:42 +00:00
0f1dba40c7
add US Robotics (3Com) 56K Voice Internal PCI Modem (WinModem) entry
...
I wish I'd been less foolish and not bought this device ...
2001-01-22 14:15:24 +00:00
5d9e997522
Regen for stallion.
2001-01-22 13:58:37 +00:00
c77d1a22c4
Add stallion products.
2001-01-22 13:57:54 +00:00
577ac6e31c
Remove the line in audio_open which zeroes sc_[pr]r.blksize.
...
Because zeroing them causes zero division panic with devices which don't
support 8kHz mulaw, and the effect of this line was to force calling
audio_calcwater even when unnecessary.
2001-01-22 08:37:54 +00:00
f2d987f8a4
Force certain commands (i.e. DVD authentication) to PIO mode. They are
...
explicitly not supported in DMA mode, and generally return an `illegal field
in CDB' error.
This should have been done ages ago.
2001-01-22 07:00:39 +00:00
135068fdc8
Add clct.
2001-01-22 02:22:35 +00:00
972d156775
Clean up a little.
2001-01-22 01:44:56 +00:00
45116f2c38
Add clct driver for Cirrus Logic CrystalClear PCI Audio CS4281.
...
Driver written by Tatoku Ogaito.
2001-01-22 01:34:42 +00:00
22a541e778
Add a comment.
2001-01-22 01:13:47 +00:00
7090ce901d
Defer stopping the interface on error to a process context.
...
XXX The cue changes have not been tested, since I don't have a cue adapter.
2001-01-21 22:09:23 +00:00
dfa2282053
Change watchdog routine. (From FreeBSD.)
...
The only thing stopping us from getting totally rid of the evil
USBD_NO_TSLEEP hack is the (broken) assumption in the MII driver that
registers can be read and written without a process context.
2001-01-21 19:42:29 +00:00
2a7443922d
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 19:36:31 +00:00
aa75661373
Use the new usb_add_task() call to execute the statistics gathering.
...
This gets rid of the evil USBD_NO_TSLEEP hask from the cue driver.
2001-01-21 19:30:35 +00:00
996efaa78c
Ad a comment.
2001-01-21 19:00:29 +00:00
df20cb2972
Change the operation of the USB event thread. Before it only performed
...
USB device discovery, now it can also perform (short) tasks for device
drivers that need a process context, but don't have one.
This is not pretty, but better than using busy-wait in an interrupt context.
2001-01-21 19:00:06 +00:00
d8f68f3949
Add a quirk for devices that cannot handle full length INQUIRY.
...
From FreeBSD.
2001-01-21 18:56:38 +00:00
8502ed9498
Remove `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:55:11 +00:00
3966e66ec8
Untangle some spl-spaghetti in cy_modem_control().
2001-01-21 16:55:10 +00:00
e391b64407
Change watchdog code (from FreeBSD).
2001-01-21 16:06:48 +00:00
1d6d81b317
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:03:11 +00:00
25c15e3189
Regen.
2001-01-21 15:58:01 +00:00
f4f53b10ea
Another hub.
2001-01-21 15:57:41 +00:00
b2245c50fc
Several changes:
...
* Get rid of `#ifdef FreeBSD'; they seem to maintain their own version.
* Change watchdog code (from FreeBSD).
* Get rid of the horrible USBD_NO_TSLEEP hack.
* Repair some const damage.
2001-01-21 15:55:05 +00:00
0906d8d1fe
Rasops supports 4bit depth.
2001-01-21 13:50:58 +00:00
e8db629494
Add code to use soft interrupt to handle USB interrupt processing.
...
Don't enable the code since it doesn't work with the kludgy Ethernet drivers.
2001-01-21 02:39:52 +00:00
0c40fe5115
Ad define for warm boot rev.
2001-01-21 02:35:31 +00:00
29984607e8
Trim space off both ends of device product and vendor strings.
2001-01-21 02:34:34 +00:00
8894e84df0
Use a better way to test if we are cold starting the device. (From FreeBSD)
2001-01-21 02:33:52 +00:00
60708ce539
Regen.
2001-01-21 02:28:55 +00:00
27293db05d
A couple of new devices (from FreeBSD).
2001-01-21 02:28:30 +00:00
227c27096f
Add some initialization to struct ifnet that seems to have become
...
necessary.
2001-01-21 02:22:27 +00:00
1aca8405a5
Cosmetic changes.
2001-01-21 00:07:13 +00:00
f7dc96fe4c
Change some splusb() to splhardusb().
2001-01-20 23:36:02 +00:00
541fa6ecfa
regen
2001-01-20 20:53:34 +00:00
2d5b0a4ff5
typo fix
...
reported by kei_sun@ba2.so-net.ne.jp
2001-01-20 20:53:07 +00:00
13ad8f5ba7
Pack the minor numbers like the Cyclades-Z driver does, and
...
make the dialout bit compatible with the other serial drivers
(and with what MAKEDEV generates for dtyCYxxx).
2001-01-20 19:29:05 +00:00
3aef368a04
Use device_lookup() in cztty_getttysoftc().
2001-01-20 19:10:36 +00:00
ddbaea62cb
Garbage-collect some unused macros.
2001-01-20 19:08:24 +00:00
9eefbe5b74
Regen; there is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:04:03 +00:00
7ad2150248
There is absolutely no point in having a FreeBSD RCS ID in this file.
2001-01-20 17:03:32 +00:00
ce1c8f1a25
Regen.
2001-01-20 08:50:30 +00:00
da5294450d
In 1.111
...
> o Add RATOC REX_R280 card.
Since this already exists in pcmciadevs, delete it for preventing compile error.
2001-01-20 08:49:53 +00:00
1d15673dae
consistently use FE_DEBUG (DEBUG was used a couple of places where it
...
was obvious that FE_DEBUG should have been used instead)
2001-01-20 07:31:00 +00:00
6549452c38
Don't deref NULL when searching for the correct board.
2001-01-20 04:19:21 +00:00
c38c39fc9b
Only need to pass a cy_softc * to cy_attach().
2001-01-20 02:26:39 +00:00
44ff75e3c5
ANSI'ify.
2001-01-20 02:24:16 +00:00
a0f7017e2e
Clean up the PCI attachment a bit, and adjust the other pieces
...
to suit.
2001-01-20 02:15:01 +00:00
cd3120ae66
Sync to pcmicadevs 1.111
2001-01-20 01:58:12 +00:00
d93492c616
Sync file with FreeBSD 1.8:
...
o Add NAKAGAWA METAL's LNT-10TN card.
o Add KINGSTON KNE-PC2 ethernet card.
o Add RATOC REX_R280 card.
o Add $FreeBSD$ id.
I've not added these cards the their respective drivers, however.
2001-01-20 01:56:16 +00:00
905ef1b7fa
Use the SCSIACCEL ioctl() to turn on TAG QUEUEs.
2001-01-19 23:04:23 +00:00
4a962c6cd9
Retry requests if the CD-ROM drive returns the sense code "Device in
...
Process of Becoming Ready".
2001-01-19 22:47:46 +00:00
28899ce913
Add another CIS variant for ELSA mc/isdn card
2001-01-19 20:04:07 +00:00
88e7f62500
regen
2001-01-19 17:28:58 +00:00
ee8a058b1d
add USB serial adapter
...
I/O DATA USB-RSAQ2 (use PROLIFIC PL2303 chip)
2001-01-19 17:28:15 +00:00
0f589a40df
Nuke all uses of splimp() in the isdn subsystem, replace by splnet().
2001-01-19 12:44:44 +00:00
e07a5ff574
constify
2001-01-19 08:54:21 +00:00
b4ef15f3bc
- paint underline on text honouring WSSCREEN_UNDERLINE.
...
- use accellerated painting for text cursor, should improve speed.
2001-01-19 05:43:43 +00:00
79c6c8ec3f
Make this compile again after const-ification.
2001-01-19 04:01:10 +00:00
c423d2c0f9
Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
...
While there fix two outdated comments.
2001-01-18 22:13:59 +00:00
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
62fde088a1
adapt to pci_knowndevs[] being const, make local constant arrays const
2001-01-18 13:12:13 +00:00
4ad663531b
regen: make pci_knowndevs[] const
2001-01-18 13:11:22 +00:00
771d1f2f35
make pci_knowndevs[] const
2001-01-18 13:03:22 +00:00
aa204493b9
Regen; Intel Gigabit Ethernet update.
2001-01-17 20:56:47 +00:00
29002abf43
Update the Intel Gigabit Ethernet entries.
2001-01-17 20:55:47 +00:00
3d0bbf9152
Filter "receive process failed to idle" on noisy chips (like the
...
ADMtek AN985).
2001-01-17 19:37:09 +00:00
193fd06950
Fix comment.
2001-01-17 08:37:09 +00:00
1d8bb9f134
managed to make this useful enough for screen editor.
...
- video base register value brings different scanline starting address
of framebuffer depending on VRAM chip column size.
many other issues left unsolved.
- text rendered in incorrect colours.
- acceleration codes should be reimplemented from scratch.
2001-01-17 06:48:09 +00:00
fc5dafc79b
Fix a rather annoying problem where the sockaddr_dl which holds
...
the link level name for the interface (ifp->if_sadl) is allocated
before ifp->if_addrlen is initialized, which could lead to allocating
too little space for the link level address.
Do this by splitting allocation of the link level name out of
if_attach() and into if_alloc_sadl(), which is normally called
by functions like ether_ifattach(). Network interfaces which
don't have a link-specific attach routine must call if_alloc_sadl()
themselves (example: gif).
Link level names are freed by if_free_sadl(), which can be called
from e.g. ether_ifdetach(). Drivers never need call if_free_sadl()
themselves as if_detach() will do it if it is not already done.
While here, add the ability to pass an AF_LINK address to
SIOCSIFADDR in ether_ioctl() (this is what caused me to notice
the problem that the above fixes).
2001-01-17 00:30:49 +00:00
d418f0d68c
Add support for AN985-based CardBus network interfaces.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2001-01-16 18:55:00 +00:00
23ded7f4c2
Regen; ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:43:19 +00:00
cb7242ca2f
Add some ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:42:56 +00:00
2663816278
Fix register offset botch when setting the multicast filter on
...
the ADMtek AN985.
2001-01-16 17:33:24 +00:00
58acc910af
regen
2001-01-16 15:57:54 +00:00
417efc284d
Add Roland SCP-55
2001-01-16 15:56:48 +00:00
1d25789f34
Update with recent files.
2001-01-16 11:54:13 +00:00
f20b78bb5d
Add a definition for PMAGD which should cover all (three?) variations of
...
it. Left commented out until DECstation switchs to WSCONS.
2001-01-16 05:49:41 +00:00
bd7039cbdb
- relocate the code to place sprite cursor inside interrupt handlers
...
called on every virtical replace.
- efforts to make the code strucutures similar across TC framebuffers.
2001-01-16 05:32:16 +00:00
f493d886c1
- make this more senseful 32bpp TC framebuffer. This is far less broken
...
than the preivous code. It can show readable characters on screen.
Tested only with 32bpp model of PMAGD opion card. Need more work for 8bpp.
- 2D accelleration will be revamped to ultilize SFBplus features.
- there seems much mulfunctionness in 32bpp codes of /sys/dev/rasops/.
Need to rectify every corners.
2001-01-16 05:06:02 +00:00
6fe782cff1
Use the real Y@P firmware. Permission granted by Kamal Parmar,
...
<kamal@siliconportals.com>, at Silicon Portals.
A big thanks to Silicon Portals for being cooperative (unlike many USB
device vendors).
2001-01-16 03:10:09 +00:00
058f408c59
Regen.
2001-01-15 23:29:28 +00:00
a1df526434
Add the 66MHz version of the Symbios 53c1010.
2001-01-15 23:29:04 +00:00
674a20f8fb
powerhook fixes, from thorpej, tested by me. Thinkpad T20 sound now perfect.
2001-01-15 23:25:39 +00:00
3bb7b7df87
Fixes from OpenBSD via chopps. Audio now works on my Thinkpad T20
...
provided I don't suspend the thing...
2001-01-15 22:28:20 +00:00
a8d16ea901
Move decl out of __HAVE_OLD_DISKLABEL
2001-01-15 21:29:30 +00:00
4d7a6c1fda
Move declaration out of __HAVE_OLD_DISKLABEL ifdef.
2001-01-15 21:27:21 +00:00
2ed1e48455
List two USB MIDI I/Fs; YAMAHA UX256 and Roland UM-1.
...
These devices, however, aren't conforming to USB-MIDI class spec.
BTW, here is very experimental version of the driver for these devices:
http://www.imou.to/~AoiMoe/UNIX-at-Random/garbage/umidi-2001-01-15.diff.gz
2001-01-15 20:26:46 +00:00
9b47b68152
abandon an attempt to have 8bpp textop and 32bpp textop parallelly.
...
Pursuade a unified logic effective for both depths.
2001-01-15 09:45:30 +00:00
452e3d1a2f
fix a typo and rearrange a comment about SFB register aliasing effect.
2001-01-15 09:41:57 +00:00
3a6d3e0771
use ri_devcmap[] values directly, instead of calling rasops_unpack_attr().
...
-
2001-01-15 09:37:42 +00:00
845a2d5b53
Fix comment typo.
2001-01-15 03:52:03 +00:00
45de366b2e
Rename __GENERIC_SOFT_INTERRUPTS to __HAVE_GENERIC_SOFT_INTERRUPTS,
...
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
2001-01-14 23:50:28 +00:00
4d81dcf9c1
splimp() -> splvm()
2001-01-14 21:28:16 +00:00
372338915a
Use splnet() to block network interrupts, not splimp().
2001-01-14 17:37:41 +00:00
bf4e834543
ELSA XI-300 WaveLanCard (PRISM2) work.
...
OEM. ADLINK 330C
http://www.adtec.co.jp/CGI/parts/parts_detail.cgi?product_id=ADLINK330C
2001-01-14 06:54:01 +00:00
cfb6a0b2c6
add missing sc->dying initializer at midiattach.
2001-01-13 16:16:12 +00:00
3a10cc3d0a
add detaching/deactivation code to midi driver.
2001-01-13 16:09:04 +00:00
dd7e31f012
The mask tables have no excuse for being in the data segment.
2001-01-12 23:03:52 +00:00
bc9dd935cf
Fix bug which affects pciide controllers in native mode (found by
...
Paul Kranenburg, many thanks !): the control register I/O is 4 byte long
although only one is used, but the control register is at offset 2, and not
0 as expected by IC code. Use bus_space_subregion() to get a handle which
points to the control register, and is one byte long.
2001-01-12 16:03:59 +00:00
12a14b346e
match T1 card. from freebsd driver, it should just work.
...
i'll test it as soon as i get the card handy.
2001-01-12 05:19:18 +00:00
78fdca968e
regen
2001-01-12 05:14:36 +00:00
c1285a8caf
add product ID for LMC T1 card. from freebsd.
2001-01-12 05:13:47 +00:00
e94e4a6d47
Move interrupt mapping before initialization of the card (which might
...
cause interrupts). This works around a problem on sparc64, where
interrupts without installed handler seem to cause heavy lossage (and
interrupts are already enabled at this stage of autoconfiguration).
2001-01-11 22:46:40 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
fc0f2f8909
Added four config entries for the DLink DE-650CT.
...
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
2001-01-10 17:37:27 +00:00
6b133efd3e
Make this work with the SA 431 and 42xx series controllers.
2001-01-10 16:48:04 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
6c3ff254ea
Get rid of (unintentionally added) ^M.
2001-01-10 14:58:08 +00:00
234840a1ae
Initialize the FBC mode register in cg6attach().
...
Values are taken from sunGX.[ch] in xsrc.
Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
2001-01-10 13:26:52 +00:00
3d5c5173f5
Add a quirk table for specific implementations.
...
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
2001-01-09 23:27:07 +00:00
6ec1759deb
regen
2001-01-09 23:20:22 +00:00
ca3478d0e2
Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e)
2001-01-09 23:19:03 +00:00
d11cfe3c79
Regen; added Symbios 53c1510D.
2001-01-09 23:16:18 +00:00
ff00b6c009
Add Symbios 53c1510D.
2001-01-09 23:15:39 +00:00
cb2d30303b
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right
...
mixer channels to be swapped (required for hardware that has wiring
reversed).
2001-01-09 23:14:25 +00:00
ba45ad64d3
Ifdef some routines only needed for ELSA Quickstep cards when compiling
...
without support for those.
2001-01-09 21:26:30 +00:00
442e2e73a9
ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT.
2001-01-09 18:56:24 +00:00
64c3b7f881
Add some 2X00 specific state flags for status response entries. Add the
...
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
2001-01-09 18:56:06 +00:00
5599d31360
ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY
...
is for both local loop and fabric cases now.
2001-01-09 18:54:53 +00:00
81df08ddef
Use a SNS REGISTER FC4 TYPE subcommand to register with the name server.
...
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
2001-01-09 18:54:06 +00:00
1b4eef2721
- Make VDAC state per-board.
...
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
2001-01-09 16:04:03 +00:00
0ed2fcf9fb
*minor* knf
2001-01-09 06:36:13 +00:00
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
7bebf9a408
On ADMtek chips, don't just idle the chip when programming the
...
multicast filter. These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
2001-01-08 22:12:57 +00:00
d101f6f462
Add Accton EN2242 10/100 MiniPCI Ethernet.
2001-01-08 21:50:47 +00:00
2482ba1fab
Regen; added Accton EN2242.
2001-01-08 21:47:38 +00:00
3628087824
Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985).
2001-01-08 21:47:10 +00:00
666e82a4e9
Use the AN985 media switch on the AN985.
2001-01-08 21:45:42 +00:00
e9bb880aaf
The ADMtek AN985 "ghosts" the single built-in PHY at every MII address.
...
Work around this by having a custom media init routine that limits the
search to MII address 1.
2001-01-08 21:40:29 +00:00
f9c77ef635
Only build "esm" if it's included in the kernel config file.
2001-01-08 21:16:26 +00:00
e6616f532a
Cosmetic changes.
2001-01-08 20:21:16 +00:00
2b00271327
Regen; added DEC SWXCR RAID.
2001-01-08 20:08:17 +00:00
18b051656b
Add product ID for DEC SWXCR RAID (a Mylex v5 controller).
2001-01-08 20:07:21 +00:00
a3aa8d5abc
Add esm audio driver.
2001-01-08 19:55:51 +00:00
ca3b496216
Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver
...
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
2001-01-08 19:54:31 +00:00
757dca55b7
These ioctl commands should be '_IOW' to set value.
...
WSMOUSEIO_SRES
WSMOUSEIO_SSCALE
WSMOUSEIO_SRATE
2001-01-08 11:20:24 +00:00
21ea7bd559
regen
2001-01-08 09:53:08 +00:00
48276d65d9
Add IDs for the NEC Versa LX and Versa Pro LX
2001-01-08 09:52:22 +00:00
9bbe5b85ca
"lp" must be defined reagardless from __HAVE_OLD_DISKLABEL
2001-01-08 06:57:21 +00:00
d040bd5908
Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when
...
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
2001-01-08 02:03:45 +00:00
b79ddef845
Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears
...
to require this.
2001-01-07 23:29:12 +00:00
6b82e7fe42
64bit police.
...
Rumors say there are archs without ISA busses, so avoid including
(uneccesarily) isa bus headers in MI files.
XXX this is the minimal solution, layer interface calls will have
XXX to be revisited later
2001-01-07 21:47:24 +00:00
4522010c18
Make certain we see COM_MPLOCK, MULTIPROCESSOR, and LOCKDEBUG
...
to avoid any confusion about whether or not we have a lock in the softc.
2001-01-07 18:09:26 +00:00
e2d1c1f926
Adapt all disk devices in MI directories to handle ODIOC* calls
...
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
2001-01-07 18:09:01 +00:00
6861904096
Regen.
2001-01-07 15:01:06 +00:00
55c57a573f
Add an Altima PHY.
2001-01-07 15:00:46 +00:00
e90b26477e
Regen.
2001-01-07 14:47:00 +00:00
6d5a1918f8
Add Epson 1640 scanner. (From FreeBSD)
2001-01-07 14:46:31 +00:00
5b6d98341e
Try both the old (wrong) and new SOFT_RESET request type.
2001-01-07 14:26:19 +00:00
218d552c4c
Note ISDN devices.
2001-01-07 13:10:54 +00:00
c5802f9f90
avoid unused variables if not RASTERCONSOLE
2001-01-07 05:41:50 +00:00
46b2a2fcd4
Do ess_config_addr() in the ofisa front end, rather than in the match
...
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
2001-01-06 22:50:00 +00:00
a30debae05
Add description of the pinout of a standard DB-25 parallel port,
...
relative to the bits described here.
2001-01-06 17:16:19 +00:00
1c518d67a0
Add WDC_CAPABILITY_SINGLE_DRIVE to ignore secound drive. Wdc on pcmcia will
...
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
2001-01-06 14:55:49 +00:00
94094c44ab
Change debugging output a little.
...
Don't the for the wrong id when UMASS_DEBUG is set.
2001-01-06 12:14:39 +00:00
f6f8ab2d11
Don't #define UAUDIO_DEBUG here.
2001-01-06 12:12:24 +00:00
4c176b9806
Disable the daic directory for now, it breaks with OBJDIR builds.
...
This needs more thought.
2001-01-05 23:17:48 +00:00
6d92451397
don't keep adding targets, but include bsd.kinc.mk... This time make obj borke.
2001-01-05 20:18:10 +00:00
34875ea7b1
Now let it survive "make install" too.
2001-01-05 19:56:55 +00:00
651aeb5899
don't let "make all" fail
2001-01-05 19:01:02 +00:00
69153b6b36
Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision
...
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
2001-01-05 18:04:42 +00:00
cbf42ca2d1
Ops, make it compile again.
2001-01-05 15:34:05 +00:00
5c800a0dab
Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747.
2001-01-05 15:29:39 +00:00
2a63f0a46c
Add support for Ultra/100 on the HPT370
...
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
2001-01-05 15:20:53 +00:00
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
6cb4620b76
(some of these changes were made in the previous revision- oops)
...
Say which mailbox command times out (polled or interrupting). Also,
give them a bit more time to timeout (5 seconds instead of 2).
2001-01-05 07:03:54 +00:00
9d7f6e219f
Ian McDonnell <apriori@world.std.com> made me see the error of my ways.
...
*Cough*. Ahem. I hadn't been setting error to XS_SENSE when there was
a check condition. Major blunder.
2001-01-05 07:02:00 +00:00
49f333783f
Don't make local defines for stuff that's already in ac97reg.h.
2001-01-05 03:33:39 +00:00
5f3c3e0d6f
Add definitions for some bits in ID and STATUS regs.
2001-01-05 03:32:46 +00:00
cc9f003455
Add some codecs.
2001-01-05 03:32:11 +00:00
4dc117d433
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed.
...
Thanks to Bernd Ernesti for pointing this out.
2001-01-04 11:34:27 +00:00
3e63d458f0
Use COM_FREQ for COM part of the last commited entry.
...
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
2001-01-04 08:49:31 +00:00
17718db1b9
Add support for boards with an Oxford Semiconductor chip.
...
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
f73703a4a6
Set the play and record parameters separately.
...
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
2001-01-04 07:05:00 +00:00
c142ce184b
Several things:
...
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
2001-01-04 06:20:49 +00:00
6ff81e44ec
No really, this is half-duplex for now. Lame.
2001-01-04 05:25:24 +00:00
ab1d9b87b0
Make some vague attempt to handle devices that do both input and output. This
...
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
2001-01-04 03:53:09 +00:00
25481ad786
Redo previous; we need to notify kbd driver.
2001-01-04 01:33:37 +00:00
29ecdf4b0c
Regen.
2001-01-03 23:15:14 +00:00
cbfa3ad17d
Add Chrysalis-ITS LunaVPN card.
2001-01-03 23:14:39 +00:00
62a4aefda9
Avoid null pointer dereference so that boot -d works again.
2001-01-03 23:03:45 +00:00
7eab063a4f
Use device_lookup.
2001-01-03 23:00:24 +00:00
a06fc2bf4b
Fix thinko in previous.
2001-01-03 21:17:05 +00:00
5fcbd5f722
- Fix a number of bugs with the configuration stuff.
...
- Bash the passthrough interface into working order.
- Add an ioctl to retrieve the `tidmap'.
2001-01-03 21:04:01 +00:00
8494f44b67
Make dumps work, and put the first part of detach into ld.c.
2001-01-03 21:01:28 +00:00
286f4f934f
Add a 'flag' member to struct puc_attach_args and struct port. For
...
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 15:13:15 +00:00
c2b9d052ba
Cosmetics.
2001-01-02 23:08:54 +00:00
3ea054452a
Add placeholder for firmware.
2001-01-02 22:38:51 +00:00
0e9ef4adc0
Forgotten commit for EZ-USB loader.
2001-01-02 22:24:00 +00:00
32e4d7004e
Add a transient driver for the YAP phone that downloads firmware into
...
the EZ-USB chip. After downloading the firmware the device detaches
and then reattaches as a composite device (audio + HID).
XXX For now there is no firmware committed since the vendor (Silicon
XXX Portals) has not yet agreed that we can redistribute their firmware.
2001-01-02 18:52:44 +00:00
5b86e8bfa8
Add subroutines to download firmware into Cypress (formerly Anchor)
...
EZ-USB chips.
2001-01-02 18:49:56 +00:00
f586756bcf
Regen.
2001-01-02 09:53:16 +00:00
d3fd188459
Add a new TI hub chip.
2001-01-02 09:52:55 +00:00
d9a9b8d6d5
the tcds cards work in pmaxen. move tcds attachment to files.tc. leave asc
...
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
2001-01-01 23:43:05 +00:00
c29358e0f9
Don't try to configure `uninteresting' devices.
2001-01-01 19:03:30 +00:00
8afb11bb20
Don't match on a bunch of scanners that should be handled by a
...
different driver.
2001-01-01 18:52:05 +00:00
47c95db1c3
Regen.
2001-01-01 18:51:08 +00:00
f33102e85d
Add another scanner.
2001-01-01 18:50:42 +00:00
5806434428
Call vdevgone() with correct minor range.
2001-01-01 18:34:12 +00:00
2f1e60b46c
Support device detach.
...
Don't call scanjet_attach() for all HP scanners.
Also, ANSIfy while I'm here.
2001-01-01 18:28:49 +00:00
2f5cf27275
PR 6402: some SCSI devices use \377 as blank, so adjust scsipi_strvis().
2000-12-31 17:54:29 +00:00
9a52f80f0f
Make the controller survive suspend/resume. Thanks to Steve Woodford
...
<steve@mctavish.co.uk> for testing.
2000-12-31 14:29:54 +00:00
196d40d973
Regen.
2000-12-31 14:04:26 +00:00
fb04e415dd
Fix Mylex products.
2000-12-31 14:03:24 +00:00
9bbf84e4ca
Changes for dzkbd/dzms. This is not yet finished, but at least the
...
kernel is useable.
2000-12-30 22:11:46 +00:00
462ff196a4
[ dummy checkin to add to previous CVS ]
...
It's probably not really a compiler bug- somebody pointed out
that it was the kernel making strings readonly. But I do think it's
a bug. The actual code was really more like:
char *revname;
...
revname = "2X00";
...
revname[1] = '2'; <<<<<<<<< BOOOM
The variable revname is not a const. If I had said
const char *revname = "2X00"
...
revname[1] = '2';
that would indeed be breaking const rules.
2000-12-30 19:47:20 +00:00
8adadc9bda
There's a compiler bug for sparc64 that makes the construct:
...
char *foo = "XXXX";
...
foo[1] = 'Y';
blow up (in the kernel) with the 2nd assignment. Work around it here-
it's probably just as well- I was spending more in cpu instructions doing
the assignment than I was saving in string space (it would have been
cheap on a pdp11 or a 68k- but the address loads and assignments on something
like sparc or alpha way outweigh the savings in space. Tsk.).
2000-12-30 19:30:09 +00:00
1a40e855c8
Undo pci_intr_map change in non-NetBSD part of the file.
2000-12-30 17:02:53 +00:00
1796fa4bd8
Fix pasto in comment.
2000-12-30 16:55:24 +00:00
2ad3fd958d
Merge 2.18 to trunk.
2000-12-30 16:52:36 +00:00
c6b9ad5aeb
Use bootverbose to now set whether or not we add
...
ISP_LOGCONFIG and ISP_LOGINFO messages into the
default logging mask.
2000-12-30 08:49:11 +00:00
02d83a4c77
Fix PR port-hpcmips/11477 "only hpcmips panics with wireless network cards"
...
Adjust the payload of receive mbufs so the data following the
ethernet header is aligned.
2000-12-30 07:57:52 +00:00
a2fe1adf2a
for calling sc->sc_acessops->pollc,
...
use wsdisplay_cd.cd_devs[unit] in accessing wsdisplay_softc
instead of casting pointer.
XXX: i compiled it in i386, hpcmips, alpha.
2000-12-30 05:38:50 +00:00
804add680f
Regen.
2000-12-30 04:39:03 +00:00
6cfa6f67c1
Fix typo.
2000-12-30 04:38:02 +00:00
44f785d4cd
Add Sun psycho bus controller.
2000-12-30 04:34:51 +00:00
e5482757b5
Fix at least alpha kernel builds. You can't pun a pointer to a dev_t on
...
alpha. This is also a bad idea. I really don't know the ws code at all
or I would just fix the whole issue.
2000-12-30 02:58:42 +00:00
9785bf0526
notify console polling mode or not to lower level framebuffer driver.
...
notify EMUL mode or not to lower level framebuffer driver.
these may use framebuffer level hardware acceleration/software optimization.
2000-12-30 01:41:51 +00:00
2c65dfb9b5
Be less talkative in attach.
2000-12-30 00:37:24 +00:00
b1cf284bd6
s/AP0_UDMA_MASK/APO_UDMA_MASK/
2000-12-29 18:59:01 +00:00
60edf7be2c
Add a bus type for psycho controllers.
2000-12-29 17:15:04 +00:00
augustss